31 Mar
2016
31 Mar
'16
10:09 p.m.
Hey hey everyone,
I know it's not really on topic, but I needed a newer ncurses version to
compile the latest Yoshimi. But it generates problems with gcc5.
From research, I thought it was only an issue with
gcc5.0 and 5.1, so I bit
the lemon and installed gcc5.3, alas still no luck. I
didn't find a version of
ncurses, that both fixes it and has a pkg-config file with it. The issue is
known and demonstrated here:
http://trac.sagemath.org/ticket/18301
They seem to have a fix somewhere in sage, but nowhere else. Can anyone please
help me? Can I easily setup a pkg-config file for my old ncurses version of
does anyone of you have a local fix from somewhere, so I can build 5.9 or 6.0
with gcc5?
Sorry, if this is a stupid question, but I really couldn't find a solution to
this, that I could use.
Thanks for any help!
Ta-ta
----
Ffanci
* Homepage: https://freeshell.de/~silvain
* Twitter: http://twitter.com/ffanci_silvain
* GitHub: https://github.com/fsilvain
31 Mar
31 Mar
10:56 p.m.
On Thu, 31 Mar 2016 22:09:38 +0200 (CEST)
Ffanci Silvain <silvain(a)freeshell.de> wrote:
Hey hey everyone,
I know it's not really on topic, but I needed a newer ncurses version to
compile the latest Yoshimi. But it generates problems with gcc5.
From research, I thought it was only an issue with gcc5.0 and 5.1, so I bit
the lemon and installed gcc5.3, alas still no luck. I didn't find a version of
ncurses, that both fixes it and has a pkg-config file with it. The issue is
known and demonstrated here:
http://trac.sagemath.org/ticket/18301
They seem to have a fix somewhere in sage, but nowhere else. Can anyone please
help me? Can I easily setup a pkg-config file for my old ncurses version of
does anyone of you have a local fix from somewhere, so I can build 5.9 or 6.0
with gcc5?
Sorry, if this is a stupid question, but I really couldn't find a solution to
this, that I could use.
Thanks for any help!
Ta-ta
----
I've done a bit of hunting around the 'net and found there is ncurses V6.0
out
there.
I was able to configure and build it with GCC5.3 without any problems - I
didn't install it because I dont want to change my exisiting setup. However,
the original .tgz file is only 3M so I can email it to you if your email
provider accepts attachments that big.
HTH
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
11:15 p.m.
Will Godfrey, Mar 31 2016:
...
I've done a bit of hunting around the 'net and
found there is ncurses V6.0 out
there.
I was able to configure and build it with GCC5.3 without any problems - I
didn't install it because I dont want to change my exisiting setup. However,
the original .tgz file is only 3M so I can email it to you if your email
provider accepts attachments that big.
Hey hey Will,
did you get ncurses from the gnu.org site? I got that too. Which configure options did you
give? If you got ncurses from another place, not affiliated with the ncurses project,
I'd like your tarball, otherwise, there's something else wrong here.
...
Ta-ta
----
Ffanci
* Homepage: https://freeshell.de/~silvain
* Twitter: http://twitter.com/ffanci_silvain
* GitHub: https://github.com/fsilvain
11:42 p.m.
On Thu, 31 Mar 2016 23:15:29 +0200 (CEST)
Ffanci Silvain <silvain(a)freeshell.de> wrote:
Will Godfrey, Mar 31 2016:
...
I *think* it was the official site. Can't find the links I followed now :(
I didn't set any configure options just did ./configure
What options did you use?
--
It wasn't me! (Well actually, it probably was)
... the hard part is not dodging what life throws at you,
but trying to catch the good bits.
I've done a bit of hunting around the
'net and found there is ncurses V6.0 out
there.
I was able to configure and build it with GCC5.3 without any problems - I
didn't install it because I dont want to change my exisiting setup. However,
the original .tgz file is only 3M so I can email it to you if your email
provider accepts attachments that big.
Hey hey Will,
did you get ncurses from the gnu.org site? I got that too. Which configure options did
you give? If you got ncurses from another place, not affiliated with the ncurses project,
I'd like your tarball, otherwise, there's something else wrong here.
...
Ta-ta
----
Ffanci
1 Apr
1 Apr
12:06 a.m.
Will J Godfrey, Mar 31 2016:
...
I didn't set any configure options just did
./configure
What options did you use?
I tried with no options and with some options, the same
result. It hangs on the mouse_trafo macro as described in many places on the web. It says,
that the problem was addressed in 6.0.
...
Ta-ta
----
Ffanci
* Homepage: https://freeshell.de/~silvain
* Twitter: http://twitter.com/ffanci_silvain
* GitHub: https://github.com/fsilvain
12:16 a.m.
On Fri, 1 Apr 2016 00:06:41 +0200 (CEST)
Ffanci Silvain <silvain(a)freeshell.de> wrote:
Will J Godfrey, Mar 31 2016:
...
Strange,
I'll send you the tarball anyway and you can give it a try. My base system here
is debian testing, if that's significant.
--
It wasn't me! (Well actually, it probably was)
... the hard part is not dodging what life throws at you,
but trying to catch the good bits.
I didn't set any configure options just did
./configure
What options did you use?
I tried with no options and with some options, the
same result. It hangs on the mouse_trafo macro as described in many places on the web. It
says, that the problem was addressed in 6.0.
...
Ta-ta
----
Ffanci
* Homepage: https://freeshell.de/~silvain
* Twitter: http://twitter.com/ffanci_silvain
* GitHub: https://github.com/fsilvain
3118
days inactive
3118
days old
linux-audio-user@lists.linuxaudio.org
5 comments
3 participants
participants (3)
-
Ffanci Silvain -
Will Godfrey -
Will J Godfrey