9 Feb
2006
9 Feb
'06
1:13 a.m.
Hello,
I'm trying to build xjadeo and configuration stops with this error:
checking for avcodec_init in -lavformat... no
configure: error: *** VIDEO: You need libavcodec-dev installed. ***
The development libraries for libavcodec and libavformat are both
installed.
I tryed uninstalling the Ubuntu packages and building my own ffmpeg from
CVS and still I get the same error.
Any help would be highly appreciated!! xjadeo is the only answer for
syncing video and audio on Linux. Thanks to Luis Garrido for his work!
Hector
9 Feb
9 Feb
11:07 a.m.
Hector Centeno-Garcia wrote:
Hello,
I'm trying to build xjadeo and configuration stops with this error:
checking for avcodec_init in -lavformat... no configure: error: ***
VIDEO: You need libavcodec-dev installed. ***
The development libraries for libavcodec and libavformat are both
installed.
I tryed uninstalling the Ubuntu packages and building my own ffmpeg from
CVS and still I get the same error.
Any help would be highly appreciated!! xjadeo is the only answer for
syncing video and audio on Linux. Thanks to Luis Garrido for his work!
Seems to be a good answer aswell, if one could only get it working ;)
What I did: First, hooked up the official deb repository of xjadeo:
http://xjadeo.sourceforge.net/ . Then I did NOT install xjadeo, but a
package called libavcodeccvs from the xjadeo repository. This eliminated
the compile-error, wich was the same for me as yours. I guess xjadeo is
picky on versions of deps installed.
But:
After having encoded the mpeg-file i'm trying with mencoder, as
described in the xjadeo README, I only get a blank window. The output is:
------------
djauto@djautolaptop:~/skjer$ sudo xjadeo yomtv.avi &
[3] 12417
djauto@djautolaptop:~/skjer$ Input #0, avi, from 'yomtv.avi':
Duration: 00:04:44.0, start: 0.000000, bitrate: 2945 kb/s
Stream #0.0, 29.97 fps(r): Video: mpeg4, yuv420p, 352x240
original frame rate: 29.97
length in seconds: 284
total frames: 8511
------------
...so everything should be ok, no? Can someone help us further? Does
it work for you, Hector?
--
Ringheims Auto - Fri musikk for bilstereo!
http://ringheimsauto.1go.dk/
11:10 a.m.
Johannes Mario Ringheim wrote:
Seems to be a good answer aswell, if one could only
get it working ;)
What I did: First, hooked up the official deb repository of xjadeo:
http://xjadeo.sourceforge.net/ . Then I did NOT install xjadeo, but a
package called libavcodeccvs from the xjadeo repository. This
eliminated the compile-error, wich was the same for me as yours. I
guess xjadeo is picky on versions of deps installed.
But:
After having encoded the mpeg-file i'm trying with mencoder, as
described in the xjadeo README, I only get a blank window. The output
is:
------------ djauto@djautolaptop:~/skjer$ sudo xjadeo yomtv.avi & [3]
12417 djauto@djautolaptop:~/skjer$ Input #0, avi, from 'yomtv.avi':
Duration: 00:04:44.0, start: 0.000000, bitrate: 2945 kb/s Stream
#0.0, 29.97 fps(r): Video: mpeg4, yuv420p, 352x240 original frame
rate: 29.97 length in seconds: 284 total frames: 8511 ------------
...so everything should be ok, no? Can someone help us further? Does
it work for you, Hector?
Did you try playing music inside Rosegarden, Muse, Ardour, etc? xjadeo
won't show anything until the Jack transport gets rolling.
I built xjadeo last from source on Gentoo, it worked without any effort.
--
Brett McCoy: Programmer by Day, Guitarist by Night
http://www.alhazred.com
http://www.cassandrasyndrome.com
http://www.revelmoon.com
11:20 a.m.
Brett McCoy wrote:
Did you try playing music inside Rosegarden, Muse,
Ardour, etc? xjadeo
won't show anything until the Jack transport gets rolling.
Yeah, I used Ardour and made sure it was the jack master, it was rolling
at 120 bpm.
--
Ringheims Auto - Fri musikk for bilstereo!
http://ringheimsauto.1go.dk/
9:32 p.m.
well, same problem here... I get a blank screen. I'll try the
sourceforge forum, Luis answers very fast.
Johannes Mario Ringheim wrote:
Brett McCoy wrote:
Did you try playing music inside Rosegarden,
Muse, Ardour, etc? xjadeo
won't show anything until the Jack transport gets rolling.
Yeah, I used Ardour and made sure it was the jack master, it was
rolling at 120 bpm.
9:17 p.m.
Thanks Johannes, that made it. I just enabled the marillat repositories
in synaptic and installed ffmpeg and the dev packages. Xjadeo now
configured and built with no problems... I'll try now with using it and
I'll report back.
cheers,
Hector
Johannes Mario Ringheim wrote:
Seems to be a good answer aswell, if one could only
get it working ;)
What I did: First, hooked up the official deb repository of xjadeo:
http://xjadeo.sourceforge.net/ . Then I did NOT install xjadeo, but a
package called libavcodeccvs from the xjadeo repository. This eliminated
the compile-error, wich was the same for me as yours. I guess xjadeo is
picky on versions of deps installed.
But:
After having encoded the mpeg-file i'm trying with mencoder, as
described in the xjadeo README, I only get a blank window. The output is:
------------
djauto@djautolaptop:~/skjer$ sudo xjadeo yomtv.avi &
[3] 12417
djauto@djautolaptop:~/skjer$ Input #0, avi, from 'yomtv.avi':
Duration: 00:04:44.0, start: 0.000000, bitrate: 2945 kb/s
Stream #0.0, 29.97 fps(r): Video: mpeg4, yuv420p, 352x240
original frame rate: 29.97
length in seconds: 284
total frames: 8511
------------
...so everything should be ok, no? Can someone help us further? Does
it work for you, Hector?
7007
days inactive
7007
days old
linux-audio-user@lists.linuxaudio.org
5 comments
3 participants
participants (3)
-
Brett McCoy -
Hector Centeno-Garcia -
Johannes Mario Ringheim