Hello. I have a problem with ZynAddSubFX. After the last time I compiled it, it segfaults on startup. Here's the part of Valgrind output that seems most relevant: ==19913== Thread 2: ==19913== Invalid read of size 4 ==19913== at 0x80ABA8A: thread1(void*) (in /usr/bin/zynaddsubfx) ==19913== by 0x40D9156: (within /lib/libpthread-2.3.6.so) ==19913== by 0x4441E4D: clone (in /lib/libc-2.3.6.so) ==19913== Address 0x0 is not stack'd, malloc'd or (recently) free'd ==19913== ==19913== Process terminating with default action of signal 11 (SIGSEGV) ==19913== Access not within mapped region at address 0x0 ==19913== at 0x80ABA8A: thread1(void*) (in /usr/bin/zynaddsubfx) ==19913== by 0x40D9156: (within /lib/libpthread-2.3.6.so) ==19913== by 0x4441E4D: clone (in /lib/libc-2.3.6.so) I'm out of luck trying to figure out what might have changed enough to cause this behavior after the last time I compiled. On top of that I'm not a coder and can only guess how to parse the sources for the cause of this. I've built kernel version 2.6.17.11 after the last time I compiled ZynAddSubFX, the previous one was 2.6.17.7. I haven't changed any kernel config settings. I've also compiled a bunch of other stuff as well, but none of them are system internals or direct dependencies to ZynAddSubFX. I'd be grateful if anyone could help me debug this. It's a pity that ZynAddSubFX is so lightly maintained - it's simply the best sounding Linux soft synth I've ever tried, but unfortunately seems to have bugs left in it. Thanks, Juuso Alasuutari ---------------------------------------------------------------- This mail sent through L-secure: http://www.l-secure.net/