28 Feb
2013
28 Feb
'13
11:34 a.m.
Hey list,
using jack_capture on an -RT kernel, I see the following message from
the program:
Warning. Could not set higher priority for a SCHED_FIFO process using
setpriority().
How could I set this higher priority?
thank you all,
best, Peter
28 Feb
28 Feb
2:07 p.m.
On Thu, Feb 28, 2013 at 5:34 AM, Peter P. <p8rpp(a)aol.com> wrote:
Hey list,
using jack_capture on an -RT kernel, I see the following message from
the program:
Warning. Could not set higher priority for a SCHED_FIFO process using
setpriority().
How could I set this higher priority?
http://jackaudio.org/faq
2:50 p.m.
* Paul Davis <paul(a)linuxaudiosystems.com> [2013-02-28 14:07]:
On Thu, Feb 28, 2013 at 5:34 AM, Peter P.
<p8rpp(a)aol.com> wrote:
Thanks Paul!
If I consider this to be the documents you had in mind
http://jackaudio.org/realtime_vs_realtime_kernel
http://jackaudio.org/linux_rt_config
http://jackaudio.org/linux_group_sched
I can already start Jack using RT-Scheduling. At least this is
what I assume, as the RT Icon flashes slowly on/off in the qjackctl
GUI, and the messages window says
"JACK server starting in realtime mode with priority 10"
"ulimit -l" says:
unlimited
Or did you imply that I should not run an RT-kernel?
Thank you so much for any hints,
best, Peter
Hey list,
using jack_capture on an -RT kernel, I see the following message from
the program:
Warning. Could not set higher priority for a SCHED_FIFO process using
setpriority().
How could I set this higher priority?
http://jackaudio.org/faq
2:59 p.m.
On Thu, Feb 28, 2013 at 8:50 AM, Peter P. <p8rpp(a)aol.com> wrote:
* Paul Davis <paul(a)linuxaudiosystems.com>
[2013-02-28 14:07]:
correct.
I can already start Jack using RT-Scheduling. At least this is
On Thu, Feb 28, 2013 at 5:34 AM, Peter P.
<p8rpp(a)aol.com> wrote:
Thanks Paul!
If I consider this to be the documents you had in mind
http://jackaudio.org/realtime_vs_realtime_kernel
http://jackaudio.org/linux_rt_config
http://jackaudio.org/linux_group_sched
Hey list,
using jack_capture on an -RT kernel, I see the following message from
the program:
Warning. Could not set higher priority for a SCHED_FIFO process using
setpriority().
How could I set this higher priority?
http://jackaudio.org/faq what I assume, as the RT Icon flashes slowly on/off in
the qjackctl
GUI, and the messages window says
"JACK server starting in realtime mode with priority 10"
"ulimit -l" says:
unlimited
then the problem is that jack_capture is asking for an even higher priority
than your system is configured to allow.
Or did you imply that I should not run an RT-kernel?
i would hope that the first URL you mention above would provide a clear
answer to that question.
1 Mar
1 Mar
8:30 a.m.
On Thu, 2013-02-28 at 14:50 +0100, Peter P. wrote:
I can already start Jack using RT-Scheduling. At least
this is
what I assume, as the RT Icon flashes slowly on/off in the qjackctl
GUI, and the messages window says
"JACK server starting in realtime mode with priority 10"
"ulimit -l" says:
unlimited
ulimit -r might be more useful for you.
4221
days inactive
4222
days old
linux-audio-user@lists.linuxaudio.org
4 comments
3 participants
participants (3)
-
Paul Davis -
Peter Nelson -
Peter P.