16 Oct
2011
16 Oct
'11
3:49 p.m.
I set pulse to not respawn itself. I also installed the jack backend for pulse. When I
launch qjackctl i have pulse killed and then restarted using the oulse backend. Then my
gnome stuff works again. I am using 11.10. This idea should work with some older versions
as well (just as long as you install the pulse backend)
Sent from my Samsung smartphone on AT&T
Rustom Mody <rustompmody(a)gmail.com> wrote:
On Sun, Oct 16, 2011 at 7:03 AM, david
<gnome(a)hawaii.rr.com> wrote:
Jan Depner wrote:
Yes Ive been doing that (on ubuntu systems) but for me that means that all
other gnome-ly things eg audio-in-firefox etc stop working.
My ubuntu is a few versions old so... have recent versions got their act
together so that audio works with or without pulse?
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user On Sat, 2011-10-15 at 19:10 +0100, rob wrote:
Uninstall it? That's what I always do.
On 15/10/11 18:49, Ketil Thorgersen wrote:
> Hi list
>
> I just gave away my UA25 to my son because I had a pci port on a
> computer and this old but capable ice7212 based sound card lying in a
> closet. I remember it even worked a couple of years ago in Linux. Anyway -
> now it doesn't record. It plays ack fine, but I am not able to make it
> record. This is on Ubuntu natty with KXstudio desktop and a multimedia
> kernel. I've tried both the special mixer Envy24 control end the later
> version. Even tried alsa mixer, but I cannot for the life of figure out how
> to get a signal into the computer.
> Everything looks good in qjackctl - 8 inputs/outputs etc.
> Does anyone actually use this any longer? Any hints??
>
> All the best
> Ketil
>
There was an issue sometime ago with ice1712 cards and pulseaudio. I
don't know whether that applies in your case.
rob
I've got the same card and I just loaded CentOS 6. Mine appears to work
OK but pulse is hosing up everything else. I can run through JACK and
direct to ALSA with Audacity but all other sound is hosed. Anyone know
how to kill Pulse?
16 Oct
16 Oct
4:08 p.m.
New subject: Hoontech DSP24 C-port
On Sun, Oct 16, 2011 at 7:18 PM, Jeremiah Benham <jjbenham(a)chicagoguitar.com
wrote:
I set pulse to not respawn itself. I also installed
the jack backend for
pulse. When I launch qjackctl i have pulse killed and then restarted using
the oulse backend. Then my gnome stuff works again. I am using 11.10. This
idea should work with some older versions as well (just as long as you
install the pulse backend)
Thanks! But can I have more details please
google pulse jack backend is not giving me anything definitive
[Is pulse backended by jack or the other way round :-) ]
4:14 p.m.
New subject: Hoontech DSP24 C-port
Hi
Den 16. okt. 2011 16:08, skrev Rustom Mody:
On Sun, Oct 16, 2011 at 7:18 PM, Jeremiah Benham
<jjbenham(a)chicagoguitar.com <mailto:jjbenham@chicagoguitar.com>> wrote:
I set pulse to not respawn itself. I also installed the jack
backend for pulse. When I launch qjackctl i have pulse killed and
then restarted using the oulse backend. Then my gnome stuff works
again. I am using 11.10. This idea should work with some older
versions as well (just as long as you install the pulse backend)
Thanks! But can I have more details please
google pulse jack backend is not giving me anything definitive
[Is pulse backended by jack or the other way round :-) ]
Thanks!
I think I will try a more minimalistic approach without pulse first.
Just good to know that people actually gets it to work still! Arch here
I come :-)
Ketil
4789
days inactive
4789
days old
linux-audio-user@lists.linuxaudio.org
2 comments
3 participants
participants (3)
-
Jeremiah Benham -
Ketil Thorgersen -
Rustom Mody