1 Jan
2006
1 Jan
'06
1:18 p.m.
Hi!
I'm trying to get Audiotrak Maya 44 USB audio interface [1] working on
Debian Sarge machine (alsa 1.0.8).
When I plug in the device, the following messages are written into
/var/log/kern.log:
usb 1-2: new full speed USB device using address 9
snd-usb-audio: probe of 1-2:1.0 failed with error -5
hiddev96: USB HID v1.00 Device [AUDIOTRAK MAYA44 USB] on usb-0000:00:1d.0-2
/proc/bus/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a92 ProdID=0091 Rev= 1.00
S: Manufacturer=AUDIOTRAK
S: Product=MAYA44 USB
C:* #Ifs= 4 Cfg#= 1 Atr=00 MxPwr=250mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=01(O) Atr=09(Isoc) MxPS= 384 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=82(I) Atr=0d(Isoc) MxPS= 384 Ivl=1ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
The interface is not found by alsa. Only machine's built-in audio chip
is in /proc/asound/cards:
0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4
Intel 82801DB-ICH4 at 0xa0100000, irq 11
Actually, alsaconf does not find the device either.
What's wrong? Someone else has definetly got it working somehow [2].
-Harri
[1] http://www.audiotrak.net/maya44usb.htm
[2] http://elists.resynthesize.com/linux-audio-users/2005/01/1312611/
1 Jan
1 Jan
1:42 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello!
I have it working under Gentoo. The Maya 44 USB works with the module
"snd-usb-audio". But you should check the settings for your hotplugd. I
had the problem that hotplug tried to manage the soundcard but it was
not able to configure it properly. After disabeling this the card worked
perfectly.
CU
Markus
http://d135-1r43.de
Harri Tuomela wrote:
Hi!
I'm trying to get Audiotrak Maya 44 USB audio interface [1] working on
Debian Sarge machine (alsa 1.0.8).
When I plug in the device, the following messages are written into
/var/log/kern.log:
usb 1-2: new full speed USB device using address 9
snd-usb-audio: probe of 1-2:1.0 failed with error -5
hiddev96: USB HID v1.00 Device [AUDIOTRAK MAYA44 USB] on usb-0000:00:1d.0-2
/proc/bus/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a92 ProdID=0091 Rev= 1.00
S: Manufacturer=AUDIOTRAK
S: Product=MAYA44 USB
C:* #Ifs= 4 Cfg#= 1 Atr=00 MxPwr=250mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=01(O) Atr=09(Isoc) MxPS= 384 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=82(I) Atr=0d(Isoc) MxPS= 384 Ivl=1ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
The interface is not found by alsa. Only machine's built-in audio chip
is in /proc/asound/cards:
0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4
Intel 82801DB-ICH4 at 0xa0100000, irq 11
Actually, alsaconf does not find the device either.
What's wrong? Someone else has definetly got it working somehow [2].
-Harri
[1] http://www.audiotrak.net/maya44usb.htm
[2] http://elists.resynthesize.com/linux-audio-users/2005/01/1312611/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDuDKy4ihw6BWdedERAv7jAJ0VXYRIR46M3eJLmtfcqErJDhgVFwCgwxOD
1TMf6LuenlP/sqRkaPDomYQ=
=V0jp
-----END PGP SIGNATURE-----
3:29 p.m.
On Sun, Jan 01, 2006 at 07:51:14PM +0000, Markus Herhoffer wrote:
I had the problem that hotplug tried to manage the soundcard but it
was not able to configure it properly. After disabeling this the card
worked perfectly.
Hi again! I removed the hotplug configured module from kernel and tried
to install it manually:
:~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92
pid=0x0091
However, the device does not seem to appear in /proc/asound/cards.
-Harri
4:54 p.m.
Hallo,
Harri Tuomela hat gesagt: // Harri Tuomela wrote:
Hi again! I removed the hotplug configured module from
kernel and tried
to install it manually:
:~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92
pid=0x0091
However, the device does not seem to appear in /proc/asound/cards.
It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
usbaudio to /etc/hotplug/blacklist. Or delete the usbaudio module
file, you will neverever need it.
Ciao
--
Frank Barknecht _ ______footils.org_ __goto10.org__
5:15 p.m.
It's a FAQ: make sure, hotplug doesn't load
the OSS module by adding
usbaudio to /etc/hotplug/blacklist. Or delete the usbaudio module
file, you will neverever need it.
regardless that you're absolutely right, even if the OSS module gets
loaded the device should appear in /proc/asound/cards as soon as
snd_usb_audio gets loaded.
Best regards
ce
5:26 p.m.
On Sun, Jan 01, 2006 at 10:54:05PM +0100, Frank Barknecht wrote:
Harri Tuomela hat gesagt: // Harri Tuomela wrote:
Hotplug didn't load the OSS audio module (called 'audio'). I checked
that with lsmod. However, I added it into blacklist, but the problem
still remains.
-Harri
Hi again! I removed the hotplug configured module from kernel and
tried to install it manually:
:~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92
pid=0x0091
However, the device does not seem to appear in /proc/asound/cards.
It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
usbaudio to /etc/hotplug/blacklist.
2 Jan
2 Jan
10:48 a.m.
Hallo,
Harri Tuomela hat gesagt: // Harri Tuomela wrote:
Hotplug didn't load the OSS audio module (called
'audio'). I checked
that with lsmod. However, I added it into blacklist, but the problem
still remains.
Hm, now I'm a bit at loss. If you can do this, then I would try a
newer kernel. 2.6.8 is a bit old already. It might be, that there are
issues in other areas, for example with your USB controller, that may
be fixed in current kernels. You could also do a test with some live
distribution first that uses ALSA and a newer kernel like Ubuntu.
Ciao
--
Frank Barknecht _ ______footils.org_ __goto10.org__
12:15 p.m.
On Sunday 01 January 2006 23:26, Harri Tuomela wrote:
On Sun, Jan 01, 2006 at 10:54:05PM +0100, Frank
Barknecht wrote:
Hi Harri. I havn't been following this thread, but saw Frank's reply about the
2.6.8 kernel. Are you using Debian Sarge by any chance, because even though I
know nothing about your USB soundcard, I did have problems with the USB for
my USB midi keyboard, and the 2.6 kernel. If you are using Sarge, there are a
few things you can try, but let me know first, as I don't want to waste your
time. Nigel.
Harri Tuomela hat gesagt: // Harri Tuomela wrote:
Hotplug didn't load the OSS audio module (called 'audio'). I checked
that with lsmod. However, I added it into blacklist, but the problem
still remains.
-Harri Hi again! I removed the hotplug configured module
from kernel and
tried to install it manually:
:~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1
: vid=0x0a92 pid=0x0091
However, the device does not seem to appear in /proc/asound/cards.
It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
usbaudio to /etc/hotplug/blacklist.
1 Jan
1 Jan
2:36 p.m.
hiddev96: USB HID v1.00 Device
your hotplug thinks it is a HID device (mice, keyboards etc.). I'm sure
the device registers as HID device on the bus to prvent windows to load
the USB audio driver.
On Linux, simply do a
modprobe snd_usb_audio
and check
cat /proc/asound/cards
and I bet you're in business.
If so, adjust your hotplug scripts or ensure snd_usb_audio gets loaded
statically during machine boot.
Best regards
ce
3:11 p.m.
On Sun, Jan 01, 2006 at 08:37:55PM +0100, Christoph Eckert wrote:
Thanks! However, it does not seem to help:
~# modprobe -v snd_usb_audio
install modprobe --ignore-install snd-usb-audio && /lib/alsa/modprobe-post-install
snd-usb-audio
insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92 pid=0x0091
~# cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4
Intel 82801DB-ICH4 at 0xa0100000, irq 11
~#
Before that I removed the hotplug configured module from kernel.
-Harri
hiddev96: USB HID v1.00 Device
the device registers as HID device on the bus to prvent windows to load
the USB audio driver.
On Linux, simply do a
modprobe snd_usb_audio
and check
cat /proc/asound/cards
and I bet you're in business.
3:41 p.m.
Hm,
Thanks! However, it does not seem to help:
~# modprobe -v snd_usb_audio
install modprobe --ignore-install snd-usb-audio &&
/lib/alsa/modprobe-post-install snd-usb-audio insmod
/lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1
vid=0x0a92 pid=0x0091 ~# cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4
Intel 82801DB-ICH4 at 0xa0100000, irq 11
~#
Before that I removed the hotplug configured module from kernel.
can't really help you on this issue, but I successfully ran a Terratec
Aureon USB until I bought a better device. The Aureon is somehow very
similar to the Maya.
THe only thing I see is that you run a 2.6.8 while I always used a
2.6.10; maybe snd_usb_audio didn't know the Maya in 2.6.8?
Best regards
ce
7038
days inactive
7039
days old
linux-audio-user@lists.linuxaudio.org
10 comments
5 participants
participants (5)
-
Christoph Eckert -
Frank Barknecht -
Harri Tuomela -
Markus Herhoffer -
Nigel Henry