26 Sep
2008
26 Sep
'08
4:45 p.m.
Julien:
This sound wonderful. Does it depend on some GUI? If not it would sound
absolutely perfect!
Kindest regards
Julien
It doesn't depend any GUI. It doesn't has any GUI at all. It's a
console-based, because of Csound console-based.
26 Sep
26 Sep
5:38 p.m.
New subject: csDrummer 20080926
2008/9/26 Schlagg <schlagg(a)gmail.com>om>:
It's a console-based, because of Csound
console-based.
Hi
Could there be a less disturbing way to run it, for those that don't
know csound ?
Something like
csdrummer -o jack
...that would allow me to setup midi and audio connections with qjackctl ?
Thanks
Emanuel
6:45 p.m.
New subject: csDrummer 20080926
2008/9/26 Emanuel Rumpf <xbran(a)web.de>de>:
Could there be a less disturbing way to run it, for
those that don't
know csound ?
Something like
csdrummer -o jack
...that would allow me to setup midi and audio connections with qjackctl ?
It seems that you want to run it in realtime. I'm not sure that it
will work. Morphing so much samples at the same time is a very greedy
for CPU process. At least on my PC it doesn't work in realtime. But
I'll think about an easy way to run it.
For now if you still want to try you may use following command:
csound -odac -+rtaudio=jack -M<MIDIInput> Drummer.orc
Also you can look here for more options:
http://www.csounds.com/manual/html/CommandFlagsCategory.html
7:15 p.m.
New subject: csDrummer 20080926
Schlagg a écrit :
2008/9/26 Emanuel Rumpf <xbran(a)web.de>de>:
I run:
without jack
csound -o dac:plughw:0 -+rtaudio=alsa -b248 -B2048 --midi-velocity=5 -F
/home/.../.../blabla.midi -T -d /home/.../csDrummer/Drummer.orc
with jack
csound -o dac:alsa_pcm:playback_ -+rtaudio=jack -+rtmidi=alsa -M
hw:1,0 -b248 -B2048 --midi-velocity=5 -F /home/.../blabla.midi -T -d
/home/.../csDrummer/Drummer.orc
If it fails, at the end of the compile csound tells you what number you
can try for -b or -B
Also for some cards you must change the sr (sample rate) to 48000 in
Drummer.orc
HTH
--
Phil.
Superbonus-Project (Site principal) <http://superbonus.project.free.fr>
Superbonus-Project (Plate-forme d'échange):
<http://philippe.hezaine.free.fr>
Could there be a less disturbing way to run it,
for those that don't
know csound ?
Something like
csdrummer -o jack
...that would allow me to setup midi and audio connections with qjackctl ?
It seems that you want to run it in realtime. I'm not sure that it
will work. Morphing so much samples at the same time is a very greedy
for CPU process. At least on my PC it doesn't work in realtime. But
I'll think about an easy way to run it.
For now if you still want to try you may use following command:
csound -odac -+rtaudio=jack -M<MIDIInput> Drummer.orc
Also you can look here for more options:
http://www.csounds.com/manual/html/CommandFlagsCategory.html 
9:03 p.m.
New subject: csDrummer 20080926
Schlagg wrote:
2008/9/26 Emanuel Rumpf <xbran(a)web.de>de>:
I guess one way round this would be to record a drum session into
rosegarden using a less intensive soft synth like fluidsynth just for
monitoring purposes, then play back and record the session through
csdrummer to render it for the final track? This might be easier to do
if csdrummer had two modes - a lowres mode which used a simpler
algorithm for realtime monitoring, and a hires mode which you could use
for rendering a session recorded in the lowres mode.
andy
Could there be a less disturbing way to run it,
for those that don't
know csound ?
Something like
csdrummer -o jack
...that would allow me to setup midi and audio connections with qjackctl ?
It seems that you want to run it in realtime. I'm not sure that it
will work. Morphing so much samples at the same time is a very greedy
for CPU process. At least on my PC it doesn't work in realtime. But
I'll think about an easy way to run it.
For now if you still want to try you may use following command:
csound -odac -+rtaudio=jack -M<MIDIInput> Drummer.orc
27 Sep
27 Sep
3:55 a.m.
New subject: csDrummer 20080926
2008/9/27 andy baxter <andy(a)earthsong.free-online.co.uk>uk>:
I guess one way round this would be to record a drum session into rosegarden
using a less intensive soft synth like fluidsynth just for monitoring
purposes, then play back and record the session through csdrummer to render
it for the final track?
Exactly. You may use any sequencer you like. Then you run csdrummer
and give a result.
This might be easier to do if csdrummer had two
modes - a lowres mode which used a simpler algorithm for realtime
monitoring, and a hires mode which you could use for rendering a session
recorded in the lowres mode.
Yeah. It's a really good idea. I've done this in SVN repo. Now it
understands "--omacro:Realtime=1" option.
6033
days inactive
6034
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
andy baxter -
Emanuel Rumpf -
Philippe Hezaine -
Schlagg