21 Feb
2005
21 Feb
'05
5:52 p.m.
Hi all!
After searching the web, I couldn't find any software that could connect
2 (or more) computers (through jack would be kind of perfect!). Well, I
got only one yet but I plan to get a laptop soon and it would be good if
could use both at the same time.
Any of you have heard of a soft like that on GNU/Linux?
Thank's in advance!
Colt
21 Feb
21 Feb
6:08 p.m.
Le 21 Février 2005 16:53, Unifr a écrit :
After searching the web, I couldn't find any
software that could connect
2 (or more) computers (through jack would be kind of perfect!). Well, I
got only one yet but I plan to get a laptop soon and it would be good if
could use both at the same time.
Any of you have heard of a soft like that on GNU/Linux?
jack.udp : http://www.alphalink.com.au/~rd/sw/jack.html
-
Marc
9:56 p.m.
On Monday 21 February 2005 05:07 pm, Marc Lavallée wrote:
Le 21 Février 2005 16:53, Unifr a écrit :
Interesting.. I'm wondering about the latency numbers.. Must compare with
dladspa
After searching the web, I couldn't find any
software that could connect
2 (or more) computers (through jack would be kind of perfect!). Well, I
got only one yet but I plan to get a laptop soon and it would be good if
could use both at the same time.
Any of you have heard of a soft like that on GNU/Linux?
jack.udp : http://www.alphalink.com.au/~rd/sw/jack.html
-
Marc 
22 Feb
22 Feb
5:08 a.m.
It depends on how many nodes the traffic has to go through, and how much
latency each node introduces. You can measure udp latency in relation to
your own system using lmbench. I think it's available on bitmover.
Jamie
On Mon, 2005-02-21 at 20:56 -0500, John Check wrote:
On Monday 21 February 2005 05:07 pm, Marc Lavallée
wrote:
--
Regards,
Jamie
Le 21 Février 2005 16:53, Unifr a écrit :
Interesting.. I'm wondering about the latency numbers.. Must compare with
dladspa After searching the web, I couldn't find any
software that could connect
2 (or more) computers (through jack would be kind of perfect!). Well, I
got only one yet but I plan to get a laptop soon and it would be good if
could use both at the same time.
Any of you have heard of a soft like that on GNU/Linux?
jack.udp : http://www.alphalink.com.au/~rd/sw/jack.html
-
Marc 
5:38 a.m.
Yes, ecpect that for real time apps and latency, its the worse case thats
important, not the average case.
- Steve
On Tue, Feb 22, 2005 at 09:09:55 +0000, Jamie Bullock wrote:
It depends on how many nodes the traffic has to go
through, and how much
latency each node introduces. You can measure udp latency in relation to
your own system using lmbench. I think it's available on bitmover.
Jamie
On Mon, 2005-02-21 at 20:56 -0500, John Check wrote:
On Monday 21 February 2005 05:07 pm, Marc
Lavallée wrote:
--
Regards,
Jamie
Le 21 Février 2005 16:53, Unifr a écrit :
Interesting.. I'm wondering about the latency numbers.. Must compare with
dladspa After searching the web, I couldn't find any
software that could connect
2 (or more) computers (through jack would be kind of perfect!). Well, I
got only one yet but I plan to get a laptop soon and it would be good if
could use both at the same time.
Any of you have heard of a soft like that on GNU/Linux?
jack.udp : http://www.alphalink.com.au/~rd/sw/jack.html
-
Marc
6:58 a.m.
On Tuesday 22 February 2005 04:38 am, Steve Harris wrote:
Yes, ecpect that for real time apps and latency, its
the worse case thats
important, not the average case.
- Steve
I wouldn't expect a lot of packet routing to be happening. Curiously enough, I
was wondering what would happen if the dlapdspa sliding windows transmission
dealie was ported to a jack framework. I need to look at jack.plumbing.
-ramble-
It could be feasible to use an OSX Mac and jack as kind of a bridge to
whatever they use to route audio... for integration purposes. I'm assuming
the proprietary Mac stuff doesn't support jack, but that doesn't mean the
converse is impossible.
On Tue, Feb 22, 2005 at 09:09:55 +0000, Jamie Bullock wrote:
> It depends on how many nodes the traffic has to go through, and how much
> latency each node introduces. You can measure udp latency in relation to
> your own system using lmbench. I think it's available on bitmover.
>
Thanks and `apt-get install lmbench`worked ;)
>
> Jamie
>
> On Mon, 2005-02-21 at 20:56 -0500, John Check wrote:
> > On Monday 21 February 2005 05:07 pm, Marc Lavallée wrote:
> > > Le 21 Février 2005 16:53, Unifr a écrit :
> > > > After searching the web, I couldn't find any software that could
> > > > connect 2 (or more) computers (through jack would be kind of
> > > > perfect!). Well, I got only one yet but I plan to get a laptop soon
> > > > and it would be good if could use both at the same time.
> > > >
> > > > Any of you have heard of a soft like that on GNU/Linux?
> > >
> > > jack.udp : http://www.alphalink.com.au/~rd/sw/jack.html
> > > -
> > > Marc
> >
> > Interesting.. I'm wondering about the latency numbers.. Must compare
> > with dladspa
>
> --
> Regards,
>
> Jamie
1:26 p.m.
John Check <j4strngs(a)bitless.net> writes:
-ramble-
It could be feasible to use an OSX Mac and jack as kind of a bridge to
whatever they use to route audio... for integration purposes. I'm assuming
the proprietary Mac stuff doesn't support jack, but that doesn't mean the
converse is impossible.
JackOSX actually hooks into CoreAudio almost seamlessly. You can play
iTunes through JACK quite well.
--
joq
9:06 p.m.
On Tuesday 22 February 2005 12:29 pm, Jack O'Quin wrote:
John Check <j4strngs(a)bitless.net> writes:
Heheh well there ya go! I know spit about OSX and audio, but I was thinking of
Logic7 which supposedly has distributed processing, which I understood
(guessed more like) to be proprietary and thus outside CoreAudio; being able
to hook into that. Anyway, I think jack.plumbing is in the ballpark for my
immediate needs so I'll have to poke at it
-ramble-
It could be feasible to use an OSX Mac and jack as kind of a bridge to
whatever they use to route audio... for integration purposes. I'm
assuming the proprietary Mac stuff doesn't support jack, but that doesn't
mean the converse is impossible.
JackOSX actually hooks into CoreAudio almost seamlessly. You can play
iTunes through JACK quite well.
7218
days inactive
7219
days old
linux-audio-user@lists.linuxaudio.org
7 comments
6 participants
participants (6)
-
Jack O'Quin -
Jamie Bullock -
John Check -
Marc Lavallée -
Steve Harris -
Unifr