23 Oct
2005
23 Oct
'05
5:39 p.m.
The Sineshaper is a monophonic DSSI synth. This is the first release.
Source tarball, screenshot and Vorbis demo are available here:
http://ll-plugins.sf.net. The knob graphics are created by Thorsten
Wilms and Peter Shorthose.
The Sineshaper synth has two sine oscillators and two waveshapers.
The sound from the two oscillators is mixed and passed through the
waveshapers, first through the first waveshaper and then the second.
You can control the tuning of both oscillators as well as their
relative loudness, and the total amount of shaping and the fraction of
that amount that each shaper applies. Both waveshapers use a sine
function for shaping the sound, but for the second shaper you can shift
the sine function (with maximal shift it becomes a cosine function) to
produce a different sound.
You can also add vibrato and tremolo, and change the ADSR envelope
that controls the amplitude and shape amount (as well as setting the
envelope sensitivity for both the amplifier and the shapers). There
is also a "Drive" control that adds distorsion, and a feedback delay
with controllable delay time and feedback amount. All control parameters
can be changed using MIDI.
The Sineshaper synth comes with some presets that you can play or use
as starting points for your own synth settings. You can not change
these "factory presets", but you can create and save your own presets.
They are written to the file .sineshaperpresets in your home directory.
If you make any nice presets I would really like to hear them.
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
23 Oct
23 Oct
6:51 p.m.
On Sunday 23 October 2005 19:40, Lars Luthman wrote:
The Sineshaper is a monophonic DSSI synth. This is the
first release.
Source tarball, screenshot and Vorbis demo are available here:
http://ll-plugins.sf.net. The knob graphics are created by Thorsten
Wilms and Peter Shorthose.
The Sineshaper synth has two sine oscillators and two waveshapers.
The sound from the two oscillators is mixed and passed through the
waveshapers, first through the first waveshaper and then the second.
You can control the tuning of both oscillators as well as their
relative loudness, and the total amount of shaping and the fraction of
that amount that each shaper applies. Both waveshapers use a sine
function for shaping the sound, but for the second shaper you can shift
the sine function (with maximal shift it becomes a cosine function) to
produce a different sound.
You can also add vibrato and tremolo, and change the ADSR envelope
that controls the amplitude and shape amount (as well as setting the
envelope sensitivity for both the amplifier and the shapers). There
is also a "Drive" control that adds distorsion, and a feedback delay
with controllable delay time and feedback amount. All control parameters
can be changed using MIDI.
The Sineshaper synth comes with some presets that you can play or use
as starting points for your own synth settings. You can not change
these "factory presets", but you can create and save your own presets.
They are written to the file .sineshaperpresets in your home directory.
If you make any nice presets I would really like to hear them.
Hi. This sounds really good, but. BUT. I'm getting the same problems with deps
that I'm getting with om, while trying to install Smack (the drum machine) It
wants libglademm, which wants, gtkmm, which wants (I presume) glibmm, and
then ligsigc++-2.0. I stopped at gtkmm caus I could see which way this was
going. I'm on FC2 for this install, and already have
libsigc++-1.2.5-1.rhfc2.ccrma which is a dep for Cheesetracker. Am I likely
to have a conflict if I install libsigc++-2.0, with the earlier version of
libsigc++? Nigel. It sounds good I'd really like to get it working.
7:15 p.m.
On Sun, 2005-10-23 at 12:49 +0000, Nigel Henry wrote:
Hi. This sounds really good, but. BUT. I'm getting
the same problems with deps
that I'm getting with om, while trying to install Smack (the drum machine) It
wants libglademm, which wants, gtkmm, which wants (I presume) glibmm, and
then ligsigc++-2.0. I stopped at gtkmm caus I could see which way this was
going. I'm on FC2 for this install, and already have
libsigc++-1.2.5-1.rhfc2.ccrma which is a dep for Cheesetracker. Am I likely
to have a conflict if I install libsigc++-2.0, with the earlier version of
libsigc++? Nigel. It sounds good I'd really like to get it working.
I don't know how Fedora works, but libsigc++ 1.* and libsigc++ 2.* have
incompatible APIs so any sane distribution would make two different
packages for them so they could coexist on the same computer. I have
libsigc++ 1.0, 1.2, and 2.0 installed on my Mandriva system, I'm pretty
sure it would work fine on Fedora too.
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
7:52 p.m.
OK,
The Sineshaper synth comes with some presets that you
can play or use
as starting points for your own synth settings. You can not change
these "factory presets", but you can create and save your own
presets. They are written to the file .sineshaperpresets in your home
directory. If you make any nice presets I would really like to hear
them.
no it built fine and I had the occasion to play a bit with it.
Some comments, if you're interested:
* The presets don't show up for any reason
* If the default settings could be adjusted, it would give a more
immediate start:
** Decrease Gain (! ;-)
** Decrease Delay
** Decrease amp release time
* I noticed that parameter changes take a long time until these take
effect. Even moving the pitch bend wheel did last some milliseconds
until it was audible. Same when playing with the UI controls
* Can it be switched to be polyphonic?
OK, enough for today, it's bed time now :) .
Thanks for the code and good night,
ce
8:23 p.m.
On Sun, 2005-10-23 at 23:58 +0200, Christoph Eckert wrote:
Yes, some people on the #lad channel had this problem too. I fixed the
bug and uploaded a new tarball (0.4.1, it's available on the same
webpage now). A way to avoid it with 0.4.0 would be to run
'./configure --with-dssi-dir=/usr/local/lib/dssi/' (or any other
directory where you want to install it, the / at the end is the
important part) and then 'make clean' and 'make install'.
The Sineshaper
synth comes with some presets that you can play or use
as starting points for your own synth settings. You can not change
these "factory presets", but you can create and save your own
presets. They are written to the file .sineshaperpresets in your home
directory. If you make any nice presets I would really like to hear
them.
no it built fine and I had the occasion to play a bit with it.
Some comments, if you're interested:
* The presets don't show up for any reason * If the default settings could be adjusted, it would
give a more
immediate start:
** Decrease Gain (! ;-)
** Decrease Delay
** Decrease amp release time
I'll look into this. Default port values are a bit tricky with LADSPA
(and DSSI) plugins, to set an exact value I think you need to use an RDF
file (which some hosts don't support). Most DSSI hosts will select the
first available program when starting the plugin though, and with the
above fix the programs should actually be loaded, so that might give you
the somewhat nicer default settings of "Factory preset 0".
* I noticed that parameter changes take a long time
until these take
effect. Even moving the pitch bend wheel did last some milliseconds
until it was audible. Same when playing with the UI controls
Most of the parameters have an internal slew limiter to prevent clicks
and pops that could be generated if the parameters were changed too
fast. This slew limiter might need some tuning, I'm really bad at
hearing latency. I'll try to make it a bit faster.
The pitch bend is a special case - I just discovered a rather
embarrassing bug. The fundamental frequency will _never_ change faster
than the portamento time allows, so if you move the pitch wheel fast the
frequency will lag behind. This is an easy fix though.
* Can it be switched to be polyphonic?
Not without some more code. I haven't really planned a polyphonic
version, but I might make one at some point in the future.
Thank you for your bug reports and comments!
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
8:48 p.m.
On Mon, 2005-10-24 at 00:24 +0200, Lars Luthman wrote:
The pitch bend is a special case - I just discovered a
rather
embarrassing bug. The fundamental frequency will _never_ change faster
than the portamento time allows...
Except on Note On events of course, otherwise I would have found this
bug much earlier.
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
25 Oct
25 Oct
4:54 a.m.
El Domingo, 23 de Octubre de 2005 21:40, Lars Luthman escribió:
The Sineshaper is a monophonic DSSI synth. This is the
first release.
Source tarball, screenshot and Vorbis demo are available here:
http://ll-plugins.sf.net. The knob graphics are created by Thorsten
Wilms and Peter Shorthose.
Thanks, I like it's "electronika" sound, I never had a synth like this one
in
my hands.
I installed it under Musix GNU+Linux, after installing: libglademm-2.4-dev and
debian dependencies.
Then I started it with ghostess, and the UI did not launched. So I installed
libglademm-2.4-1c2 libglibmm-2.4-1c2 libgtkmm-2.4-1c2 libsigc++-2.0-0c2
But the GUI is still not working at all (sineshaper sounds great!)
Ok, so I try with Rosegarden and then I can see the knobs from rosegarden, and
it sounds too.
Well, nice Synth!
Marcos
___________________________________________________________
1GB gratis, Antivirus y Antispam
Correo Yahoo!, el mejor correo web del mundo
http://correo.yahoo.com.ar
9:09 a.m.
On Tue, 2005-10-25 at 03:57 +0200, Marcos Guglielmetti wrote:
El Domingo, 23 de Octubre de 2005 21:40, Lars Luthman
escribió:
No GUI? That's not good.
Do you see the native Sineshaper GUI in Rosegarden, or just Rosegarden's
generic DSSI GUI?
Did you get a core dump or any error messages when the GUI wouldn't show
up in Ghostess?
Did the GUI actually get installed OK (do you have a program
called /usr/local/lib/dssi/sineshaper/sineshaper_gtk and a Glade file
at /usr/local/lib/dssi/sineshaper/sineshaper.glade [or if you installed
it in another directory, do you have those files there?]) ?
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
The Sineshaper is a monophonic DSSI synth. This
is the first release.
Source tarball, screenshot and Vorbis demo are available here:
http://ll-plugins.sf.net. The knob graphics are created by Thorsten
Wilms and Peter Shorthose.
Thanks, I like it's "electronika" sound, I never had a synth like this one
in
my hands.
I installed it under Musix GNU+Linux, after installing: libglademm-2.4-dev and
debian dependencies.
Then I started it with ghostess, and the UI did not launched. So I installed
libglademm-2.4-1c2 libglibmm-2.4-1c2 libgtkmm-2.4-1c2 libsigc++-2.0-0c2
But the GUI is still not working at all (sineshaper sounds great!)
Ok, so I try with Rosegarden and then I can see the knobs from rosegarden, and
it sounds too.
6:04 p.m.
El Martes, 25 de Octubre de 2005 13:10, Lars Luthman escribió:
I can see the Rosegarden's generic DSSI GUI: I think that it has all the
sineshaper knobs, but I can't make new sineshaper patches.
Ok, so I try
with Rosegarden and then I can see the knobs from
rosegarden, and it sounds too.
No GUI? That's not good.
Do you see the native Sineshaper GUI in Rosegarden, or just Rosegarden's
generic DSSI GUI?
Did you get a core dump or any error messages when the GUI wouldn't show
up in Ghostess?
See the attached file.
Did the GUI actually get installed OK (do you have a
program
called /usr/local/lib/dssi/sineshaper/sineshaper_gtk
ls /usr/local/lib/dssi/sineshaper/sineshaper_gtk
ls: /usr/local/lib/dssi/sineshaper/sineshaper_gtk: No existe el fichero o el
directorio
root@2[/]# ls /usr/lib/dssi/sineshaper/sineshaper_gtk
/usr/lib/dssi/sineshaper/sineshaper_gtk
and a Glade file
at /usr/local/lib/dssi/sineshaper/sineshaper.glade [or if you installed
it in another directory, do you have those files there?]) ?
la /usr/lib/dssi/sineshaper/sineshaper.glade
-rw-r--r-- 1 root root 126112 2005-10-25
02:33 /usr/lib/dssi/sineshaper/sineshaper.glade
I will mail you an strace output from it, thanks.
--
Marcos Guglielmetti
Coordinador del desarrollo de Musix GNU+Linux (www.musix.org.ar)
fecha: mar oct 25 15:55:10 CEST 2005
7:12 p.m.
On Tue, 2005-10-25 at 16:18 +0200, Marcos Guglielmetti wrote:
El Martes, 25 de Octubre de 2005 13:10, Lars Luthman
escribió:
I can see in that strace output that ghostess actually did find the GUI
program. So the problem must be in the actual execution of the GUI, or
in the communication between ghostess and the GUI. Could you try to run
the GUI directly, using the command
/usr/lib/dssi/sineshaper/sineshaper_gtk
You should get something similar to this output:
Not enough arguments passed to the DSSIUIClient constructor!
Could not start OSC listener. You are not running the
program manually, are you? It's supposed to be started by
the plugin host.
If you get that the problem is most likely in the OSC communication, if
you get something else there is probably something wrong with the GUI
program or the libraries it uses.
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
Did you get a core dump or any error messages
when the GUI wouldn't show
up in Ghostess?
See the attached file.
I will mail you an strace output from it, thanks.
26 Oct
26 Oct
3:42 a.m.
El Martes, 25 de Octubre de 2005 23:13, Lars Luthman escribió:
On Tue, 2005-10-25 at 16:18 +0200, Marcos Guglielmetti
wrote:
Yes I do
El Martes, 25 de Octubre de 2005 13:10, Lars
Luthman escribió:
I can see in that strace output that ghostess actually did find the GUI
program. So the problem must be in the actual execution of the GUI, or
in the communication between ghostess and the GUI. Could you try to run
the GUI directly, using the command Did you get a core dump or any error messages
when the GUI wouldn't
show up in Ghostess?
See the attached file.
I will mail you an strace output from it, thanks. /usr/lib/dssi/sineshaper/sineshaper_gtk
You should get something similar to this output:
Not enough arguments passed to the DSSIUIClient constructor!
Could not start OSC listener. You are not running the
program manually, are you? It's supposed to be started by
the plugin host.
/usr/lib/dssi/sineshaper/sineshaper_gtk
Not enough arguments passed to the DSSIUIClient constructor!
Could not start OSC listener. You are not running the
program manually, are you? It's supposed to be started by
the plugin host.
If you get that the problem is most likely in the OSC
communication, if
you get something else there is probably something wrong with the GUI
program or the libraries it uses.
Hexter and the other DSSI synth's GUIs works perfect, I dont know what is
going on with sineshaper, tell me if I can help...
--
Marcos Guglielmetti
Coordinador del desarrollo de Musix GNU+Linux (www.musix.org.ar)
fecha: mié oct 26 02:10:01 CEST 2005
___________________________________________________________
1GB gratis, Antivirus y Antispam
Correo Yahoo!, el mejor correo web del mundo
http://correo.yahoo.com.ar
10:53 a.m.
On Wed, 2005-10-26 at 02:17 +0200, Marcos Guglielmetti wrote:
/usr/lib/dssi/sineshaper/sineshaper_gtk
Not enough arguments passed to the DSSIUIClient constructor!
Could not start OSC listener. You are not running the
program manually, are you? It's supposed to be started by
the plugin host.
OK, one more try. Run 'ghostess -debug -1 sineshaper.so'. This will
print a lot of text to the terminal, look for lines that look something
like
ghostess: instance 0 on channel 0, plugin 0 is
'sineshaper/ll-sineshaper/inst00'
and
ghostess: host OSC URL is osc.udp://localhost:19605/
Do not push the UI button in the Ghostess window.
Next, in another terminal, run this:
/usr/lib/dssi/sineshaper/sineshaper_gtk
osc.udp://localhost:19605/dssi/sineshaper/ll-sineshaper/inst00 sineshaper.so sineshaper
Testing
where you replace osc.udp://localhost:19605/ with the OSC URL that
ghostess printed for you, and sineshaper/ll-sineshaper/inst00 with the
plugin path that ghostess printed for you. Ghostess should now print
something similar to
ghostess: OSC: got update request from <osc.udp://localhost:10111/scope>
...and a number of lines starting with 'ghostess OSC control handler:'
sineshaper_gtk in the other terminal should not print anything. Now push
the 'UI' button in the Ghostess window. This should open the sineshaper
GUI window which should look like this:
http://ll-plugins.sourceforge.net/screenshots/sineshaper.png
This is what _should_ happen if everything is working correctly. On your
system it will probably do something else at some point, and this might
help us find out exactly what the problem is.
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
27 Oct
27 Oct
12:43 a.m.
El Miércoles, 26 de Octubre de 2005 14:52, Lars Luthman escribió:
/usr/lib/dssi/sineshaper/sineshaper_gtk
osc.udp://localhost:19605/dssi/sineshaper/ll-sineshaper/inst00
sineshaper.so sineshaper Testing
where you replace osc.udp://localhost:19605/ with the OSC URL that
ghostess printed for you, and sineshaper/ll-sineshaper/inst00 with the
plugin path that ghostess printed for you. Ghostess should now print
something similar to
Ok, I tried with:
/usr/lib/dssi/sineshaper/sineshaper_gtk
osc.udp://Musix_GNU+Linux:17067/dssi/sineshaper/ll-sineshaper/inst00
sineshaper.so sineshaper Testing
Violación de segmento
Translated:
"Segmentation Fault"
Oh, no... :(
I will mail you an strace with it's output
I hope not to bother you...
--
Marcos Guglielmetti
Coordinador del desarrollo de Musix GNU+Linux (www.musix.org.ar)
fecha: mié oct 26 16:10:03 CEST 2005
___________________________________________________________
1GB gratis, Antivirus y Antispam
Correo Yahoo!, el mejor correo web del mundo
http://correo.yahoo.com.ar
10:32 a.m.
On Wed, 2005-10-26 at 17:00 +0200, Marcos Guglielmetti wrote:
Ok, I tried with:
/usr/lib/dssi/sineshaper/sineshaper_gtk
osc.udp://Musix_GNU+Linux:17067/dssi/sineshaper/ll-sineshaper/inst00
sineshaper.so sineshaper Testing
Violación de segmento
Translated:
"Segmentation Fault"
Oh, no... :(
No, this is good - segmentation faults are often a lot easier to debug
than a program that doesn't crash but still doesn't do what it's
supposed to do.
A backtrace would be very useful. You can get one by running
'gdb /usr/lib/dssi/sineshaper/sineshaper_gtk core.*' and then typing 'bt
full' (where core.* is the name of the dumped core file which should
have been generated when you got the segmentation fault, if you didn't
get a core file you can try running the command 'ulimit -c unlimited' in
the shell and then run the GUI again, with the same arguments as last
time).
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
28 Oct
28 Oct
9:51 a.m.
On Thursday 27 October 2005 14:33, Lars Luthman wrote:
On Wed, 2005-10-26 at 17:00 +0200, Marcos Guglielmetti
wrote:
Now it did not produced segmentation fault (but it didn't work too), details
are into "prueba" file
--
Marcos
fecha: vie oct 28 07:25:02 CEST 2005
Ok, I tried with:
/usr/lib/dssi/sineshaper/sineshaper_gtk
osc.udp://Musix_GNU+Linux:17067/dssi/sineshaper/ll-sineshaper/inst00
sineshaper.so sineshaper Testing
Violación de segmento
Translated:
"Segmentation Fault"
Oh, no... :(
No, this is good - segmentation faults are often a lot easier to debug
than a program that doesn't crash but still doesn't do what it's
supposed to do.
A backtrace would be very useful. You can get one by running
'gdb /usr/lib/dssi/sineshaper/sineshaper_gtk core.*' and then typing 'bt
full' (where core.* is the name of the dumped core file which should
have been generated when you got the segmentation fault, if you didn't
get a core file you can try running the command 'ulimit -c unlimited' in
the shell and then run the GUI again, with the same arguments as last
time).
12:24 p.m.
On Fri, 2005-10-28 at 08:55 +0200, Marcos Guglielmetti wrote:
I one terminal I did:
# ulimit -c unlimited
# ghostess -debug -1 /usr/lib/dssi/sineshaper.so
ghostess: ghostess starting...
ghostess: debug level now ffffffff
ghostess: instance 0 on channel 0, plugin 0 is
'sineshaper/ll-sineshaper/inst00'
ghostess: host OSC URL is
osc.udp://Musix_GNU+Linux:11425/
ghostess sineshaper/ll-sineshaper/inst00: program 8 is MIDI bank 0
program 8, named
'Nasty'
ghostess sineshaper/ll-sineshaper/inst00: program 7 is
MIDI bank 0
program 7, named 'Cosineshaper'
ghostess sineshaper/ll-sineshaper/inst00: program 6 is
MIDI bank 0
program 6, named 'Noisy'
ghostess sineshaper/ll-sineshaper/inst00: program 5 is
MIDI bank 0
program 5, named 'Clean'
ghostess sineshaper/ll-sineshaper/inst00: program 4 is
MIDI bank 0
program 4, named 'Soft'
ghostess sineshaper/ll-sineshaper/inst00: program 3 is
MIDI bank 0
program 3, named 'Bright'
ghostess sineshaper/ll-sineshaper/inst00: program 2 is
MIDI bank 0
program 2, named 'Woodpecker'
ghostess sineshaper/ll-sineshaper/inst00: program 1 is
MIDI bank 0
program 1, named 'Tremolo pad'
ghostess sineshaper/ll-sineshaper/inst00: program 0 is
MIDI bank 0
program 0, named 'Default'
ghostess ready
In another terminal:
/usr/lib/dssi/sineshaper/sineshaper_gtk osc.udp://Musix_GNU
+Linux:17067/dssi/sineshaper/ll-sineshaper/inst00 sineshaper.so
sineshaper Testing
But now I didn't got any error! (segmentation fault), and the GUI is
still not working... I am lost...
Two problems: You need to run 'ulimit -c unlimited' in the shell that
you start sineshaper_gtk in, not the one that you start ghostess in
(ulimit settings are not global, they only affect the current shell and
any child processes of that shell), and you need to run sineshaper_gtk
with the URL that ghostess prints, otherwise it won't be able to connect
to ghostess (you are using port 17067 for sineshaper_gtk but ghostess
says that it's running on port 11425).
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
27 Oct
27 Oct
8:08 p.m.
On Sunday 23 October 2005 19:40, Lars Luthman wrote:
The Sineshaper is a monophonic DSSI synth. This is the
first release.
Source tarball, screenshot and Vorbis demo are available here:
http://ll-plugins.sf.net. The knob graphics are created by Thorsten
Wilms and Peter Shorthose.
The Sineshaper synth has two sine oscillators and two waveshapers.
The sound from the two oscillators is mixed and passed through the
waveshapers, first through the first waveshaper and then the second.
You can control the tuning of both oscillators as well as their
relative loudness, and the total amount of shaping and the fraction of
that amount that each shaper applies. Both waveshapers use a sine
function for shaping the sound, but for the second shaper you can shift
the sine function (with maximal shift it becomes a cosine function) to
produce a different sound.
You can also add vibrato and tremolo, and change the ADSR envelope
that controls the amplitude and shape amount (as well as setting the
envelope sensitivity for both the amplifier and the shapers). There
is also a "Drive" control that adds distorsion, and a feedback delay
with controllable delay time and feedback amount. All control parameters
can be changed using MIDI.
The Sineshaper synth comes with some presets that you can play or use
as starting points for your own synth settings. You can not change
these "factory presets", but you can create and save your own presets.
They are written to the file .sineshaperpresets in your home directory.
If you make any nice presets I would really like to hear them.
HI Lars. I'm having a lot of problems getting Sineshaper installed on FC2 or
FC3. The dependencies go back as far as libsigc++-2.0.15. This installs ok,
but as the site has no devel package for it, I have no .pc file for pkgconfig
to find. Could you tell me what distro you're running Sineshaper on, and how
to handle the dependencies. The dependencies end at libsigc++-2.0.15, then,
glibmm-2.8.0, then gtkmm-2.8.0, then, libglademm-2.6.0, then.
Sineshaper-0.4.0. I'm not complaining. I'd just like to get it working as
some reports say it has a unique sound. All the best. Nigel.
10:07 p.m.
On Fri, 2005-10-28 at 00:07 +0000, Nigel Henry wrote:
HI Lars. I'm having a lot of problems getting
Sineshaper installed on FC2 or
FC3. The dependencies go back as far as libsigc++-2.0.15. This installs ok,
but as the site has no devel package for it, I have no .pc file for pkgconfig
to find. Could you tell me what distro you're running Sineshaper on, and how
to handle the dependencies. The dependencies end at libsigc++-2.0.15, then,
glibmm-2.8.0, then gtkmm-2.8.0, then, libglademm-2.6.0, then.
Sineshaper-0.4.0. I'm not complaining. I'd just like to get it working as
some reports say it has a unique sound. All the best. Nigel.
I'm using Mandriva 2006.0. With the URPMI mirrors set up correctly the
command 'urpmi liblo-devel libglademm-devel' should be enough to install
all the build dependencies (except the DSSI header which I don't think
is in any official Mandrake package yet).
But it sounds very strange that Fedora doesn't have a development
package for libsigc++ 2.0. That would mean that you'd have to build and
install development packages for glibmm, gtkmm, and glademm yourself.
--
Lars Luthman
PGP key: http://www.d.kth.se/~d00-llu/pgp_key.php
Fingerprint: FCA7 C790 19B9 322D EB7A E1B3 4371 4650 04C7 7E2E
7013
days inactive
7018
days old
linux-audio-user@lists.linuxaudio.org
18 comments
4 participants
participants (4)
-
Christoph Eckert -
Lars Luthman -
Marcos Guglielmetti -
Nigel Henry