27 Apr
2010
27 Apr
'10
7:17 p.m.
Hi everyone,
The Jackbeat step sequencer version 0.7.5 has been released.
Download it from:
http://jackbeat.samalyse.org
News
~~~~
A critical compatibility issue with gtk >= 2.19 has been fixed.
ChangeLog
~~~~~~~~~
jackbeat (0.7.5)
* #47: fix startup crash with gtk >= 2.19 caused by new GtkBuilder widget
name handling
Musically yours
--
Olivier
29 Apr
29 Apr
6:31 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
Hi everyone,
The Jackbeat step sequencer version 0.7.5 has been released.
Download it from:
http://jackbeat.samalyse.org
Good news, I like this little beatbox a lot ;-)
but alas, after building it, it says:
(jackbeat:6982): Gtk-WARNING **: Failed to set property
GtkToolbar.icon-size to GTK_ICON_SIZE_SMALL_TOOLBAR: Could not parse
integer `GTK_ICON_SIZE_SMALL_TOOLBAR'
what can I do?
best regs
HZN
News
~~~~
A critical compatibility issue with gtk >= 2.19 has been fixed.
ChangeLog
~~~~~~~~~
jackbeat (0.7.5)
* #47: fix startup crash with gtk >= 2.19 caused by new GtkBuilder widget
name handling
Musically yours
--
Olivier
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
iEYEARECAAYFAkvZtE4ACgkQ1Aecwva1SWN2wwCfWJGEwBD55ZKWpv9/Xkz2Y/Lp
takAniREbbAio/mjhhq+sYt4ooBt9B8V
=yT4a
-----END PGP SIGNATURE-----
30 Apr
30 Apr
5:08 p.m.
Hey Hartmut,
On 04/29/2010 06:31 PM, Hartmut Noack wrote:
Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
Glad to read that :)
The Jackbeat step sequencer version 0.7.5 has
been released.
Download it from:
http://jackbeat.samalyse.org
Good news, I like this little beatbox a lot ;-) but alas, after building it, it says:
(jackbeat:6982): Gtk-WARNING **: Failed to set property
GtkToolbar.icon-size to GTK_ICON_SIZE_SMALL_TOOLBAR: Could not parse
integer `GTK_ICON_SIZE_SMALL_TOOLBAR'
what can I do?
This is only a warning. Does Jackbeat run ok?
--
Olivier
2 May
2 May
3:24 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Sorry for the delay -was kinda busy etc ;-)
Am 30.04.2010 17:08, schrieb Olivier Guilyardi:
No, it does not.
It looks like a problem with jack - if I start it with -n it opens the
GUI at least.
So well ... hmmm if I set the jack-driver *after* opening the GUI with
the null-driver, it works. It switches from null to jack without a
glitch and is running right now without any issues.
Maybe some problem with the initial rc-file?
OK - and now it starts OK with jack after closing it also.
nice new GUI and still the old quality: after about 3-4 min I have
something sounding cool running with it ;-)
So thanks again.
HZN/Berlin
Hey Hartmut,
On 04/29/2010 06:31 PM, Hartmut Noack wrote:
> Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
(jackbeat:6982): Gtk-WARNING **: Failed to set property
GtkToolbar.icon-size to GTK_ICON_SIZE_SMALL_TOOLBAR: Could not parse
integer `GTK_ICON_SIZE_SMALL_TOOLBAR'
what can I do?
This is only a warning. Does Jackbeat run ok? --
Olivier
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
iEYEARECAAYFAkvdfRYACgkQ1Aecwva1SWOl4gCfcfSkfcOEg5EMSied8dgFywSV
NDIAnRm84AOdieSNTEVCTHx2zknGz2q/
=fZEq
-----END PGP SIGNATURE-----
9:38 p.m.
Hi Hartmut
On 05/02/2010 03:24 PM, Hartmut Noack wrote:
Sorry for the delay -was kinda busy etc ;-)
Am 30.04.2010 17:08, schrieb Olivier Guilyardi:
No, it does not.
It looks like a problem with jack - if I start it with -n it opens the
GUI at least.
That is bad. Jackbeat should start anyway. Command line switches are sometimes a
blessing I see :)
Hey Hartmut,
On 04/29/2010 06:31 PM, Hartmut Noack wrote:
> Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
(jackbeat:6982): Gtk-WARNING **: Failed to set property
GtkToolbar.icon-size to GTK_ICON_SIZE_SMALL_TOOLBAR: Could not parse
integer `GTK_ICON_SIZE_SMALL_TOOLBAR'
what can I do?
This is only a warning. Does Jackbeat run ok? So well ... hmmm if I set the jack-driver *after*
opening the GUI with
the null-driver, it works. It switches from null to jack without a
glitch and is running right now without any issues.
Maybe some problem with the initial rc-file?
It could be but I don't think so..
OK - and now it starts OK with jack after closing it also.
I sense a bug a in Jackbeat.
Could you please choose "Automatic" for the audio output, then close Jackbeat,
restart it and attach the console output here. Or even better, post a ticket at
http://jackbeat.samalyse.org/newticket. As you prefer..
nice new GUI and still the old quality: after about
3-4 min I have
something sounding cool running with it ;-)
That's what Jackbeat is meant for: spontaneity :)
--
Olivier
10:23 p.m.
On 05/02/2010 09:38 PM, Olivier Guilyardi wrote:
[...]
That is bad. Jackbeat should start anyway. Command line switches are sometimes a
blessing I see :)
Okay, one sec: I'm seeing the same behavior on a box that I upgraded from Debian
Lenny to Squeeze a couple of days ago.
After debugging, I see that the problem is caused by PulseAudio which blocks
*after a few writes* when the audio device is busy. It looks like the PulseAudio
buffers gets filled, and then pa_simple_write() just deadlocks.
If I release the device (eg, exits Rezound, etc..) then it works fine.
This is really unexpected.
Have anybody had such troubles with PulseAudio 0.9.21 on Squeeze or similar?
--
Olivier
This is only a warning. Does Jackbeat run ok?
No, it does not.
It looks like a problem with jack - if I start it with -n it opens the
GUI at least. So well ... hmmm if I set the jack-driver *after*
opening the GUI with
the null-driver, it works. It switches from null to jack without a
glitch and is running right now without any issues.
Maybe some problem with the initial rc-file?
It could be but I don't think so..
OK - and now it starts OK with jack after closing
it also.
I sense a bug a in Jackbeat.
Could you please choose "Automatic" for the audio output, then close Jackbeat,
restart it and attach the console output here. Or even better, post a ticket at
http://jackbeat.samalyse.org/newticket. As you prefer..
12 May
12 May
3:55 p.m.
Hello Hartmut,
On 05/02/2010 03:24 PM, Hartmut Noack wrote:
Can you tell me which Linux distribution and version you're running?
--
Olivier
Sorry for the delay -was kinda busy etc ;-)
Am 30.04.2010 17:08, schrieb Olivier Guilyardi:
[...]
On 04/29/2010 06:31 PM, Hartmut Noack wrote:
> Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
This is only a
warning. Does Jackbeat run ok?
No, it does not.
It looks like a problem with jack - if I start it with -n it opens the
GUI at least.
So well ... hmmm if I set the jack-driver *after* opening the GUI with
the null-driver, it works. It switches from null to jack without a
glitch and is running right now without any issues.
Maybe some problem with the initial rc-file?
OK - and now it starts OK with jack after closing it also.
11:24 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 12.05.2010 15:55, schrieb Olivier Guilyardi:
Hello Hartmut,
On 05/02/2010 03:24 PM, Hartmut Noack wrote:
Can you tell me which Linux distribution and version you're running?
Its Suse 11.2 with jackd 0.118 from its repos.
Sorry for the delay -was kinda busy etc ;-)
Am 30.04.2010 17:08, schrieb Olivier Guilyardi:
[...]
On 04/29/2010 06:31 PM, Hartmut Noack wrote:
> Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
This is
only a warning. Does Jackbeat run ok?
No, it does not.
It looks like a problem with jack - if I start it with -n it opens the
GUI at least.
So well ... hmmm if I set the jack-driver *after* opening the GUI with
the null-driver, it works. It switches from null to jack without a
glitch and is running right now without any issues.
Maybe some problem with the initial rc-file?
OK - and now it starts OK with jack after closing it also. --
Olivier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
iEYEARECAAYFAkvrHIEACgkQ1Aecwva1SWMhyACfVK5mOAZ9OTt2xy0+3Oi+ug0P
WCYAnR9tK1eh0hnMZkMAudwlpjkisZxS
=Cgrm
-----END PGP SIGNATURE-----
11:37 p.m.
On 05/12/2010 11:24 PM, Hartmut Noack wrote:
Am 12.05.2010 15:55, schrieb Olivier Guilyardi:
Thanks!
--
Olivier
Hello Hartmut,
On 05/02/2010 03:24 PM, Hartmut Noack wrote:
Can you tell me which
Linux distribution and version you're running?
Its Suse 11.2 with jackd 0.118 from its repos. Sorry for the delay -was kinda busy etc ;-)
Am 30.04.2010 17:08, schrieb Olivier Guilyardi:
> On 04/29/2010 06:31 PM, Hartmut Noack wrote:
>> Am 27.04.2010 19:17, schrieb Olivier Guilyardi:
[...]
This is
only a warning. Does Jackbeat run ok?
No, it does not.
It looks like a problem with jack - if I start it with -n it opens the
GUI at least.
So well ... hmmm if I set the jack-driver *after* opening the GUI with
the null-driver, it works. It switches from null to jack without a
glitch and is running right now without any issues.
Maybe some problem with the initial rc-file?
OK - and now it starts OK with jack after closing it also.
5342
days inactive
5357
days old
linux-audio-user@lists.linuxaudio.org
8 comments
2 participants
participants (2)
-
Hartmut Noack -
Olivier Guilyardi