5 Oct
2009
5 Oct
'09
5:50 p.m.
Hi
I'd like to play azr-3 from my usb midi keyboard. However in qjackctl
the keyboard shows up as alsa midi and azr-3 shows up as jack midi (as
far as I understand it).
How do I go about this? I seem to remember some solution that let's alsa
mide show up as jack midi or the other way around. But I couldn't even
dig it out from google.
Any help appreciated, thanks in advance.
--
Atte
http://atte.dk http://modlys.dk http://virb.com/atte
5 Oct
5 Oct
5:58 p.m.
On Mon, Oct 5, 2009 at 3:50 PM, Atte Andre Jensen <atte.jensen(a)gmail.com> wrote:
Hi
I'd like to play azr-3 from my usb midi keyboard. However in qjackctl
the keyboard shows up as alsa midi and azr-3 shows up as jack midi (as
far as I understand it).
How do I go about this? I seem to remember some solution that let's alsa
mide show up as jack midi or the other way around. But I couldn't even
dig it out from google.
Any help appreciated, thanks in advance.
make sure you either
(a) run the ALSA backend's JACK/ALSA bridge (-X seq on the command
line, or lower left
corner of qjackct's setup dialog)
OR
(b) run a bridge client such as a2jmidid
6:20 p.m.
Paul Davis wrote:
(a) run the ALSA backend's JACK/ALSA bridge (-X
seq on the command
line, or lower left
corner of qjackct's setup dialog)
If you mean the "midi driver" drop down, it's disabled here when I run
through firewire...
OR
(b) run a bridge client such as a2jmidid
That works great, thanks for the hint!
--
Atte
http://atte.dk http://modlys.dk http://virb.com/atte
6 Oct
6 Oct
5:32 a.m.
On Mon, Oct 05, 2009 at 10:19:59PM +0200, Atte Andre Jensen wrote :
By the way, it's interesting to know that you can either use it as a
daemon bridge (a2jmidid) or as a static bridge (which may be, I think,
described as a "pipe") by using a2jmidi_bridge and/or j2amidi_bridge.
I just precise this, because I turned a bit around before finding it
(the problem was that a2jmidid didn't catch every midi ports, for some
reason, especially for video and lights softwares).
Paul Davis wrote:
Yes, FFFADO doesn't include this.
(a) run the ALSA backend's JACK/ALSA bridge
(-X seq on the command
line, or lower left
corner of qjackct's setup dialog)
If you mean the "midi driver" drop down, it's disabled here when I run
through firewire... OR
(b) run a bridge client such as a2jmidid
That works great, thanks for the hint!
--
Atte
http://atte.dk http://modlys.dk http://virb.com/atte
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
--
Aurélien
5:48 a.m.
On Tuesday 06 October 2009 09:26:12 Aurelien wrote:
By the way, it's interesting to know that you can
either use it as a
daemon bridge (a2jmidid) or as a static bridge (which may be, I think,
described as a "pipe") by using a2jmidi_bridge and/or j2amidi_bridge.
I just precise this, because I turned a bit around before finding it
(the problem was that a2jmidid didn't catch every midi ports, for some
reason, especially for video and lights softwares).
You did check "a2jmidid -e" to see more midi ports?
Arnold
6:34 a.m.
On Tue, Oct 06, 2009 at 09:48:19AM +0200, Arnold Krille wrote :
On Tuesday 06 October 2009 09:26:12 Aurelien wrote:
Yes, but it was some quite weird softs, not really designed properly
with alsa seq/raw at the beginning, so, it's sometimes easier to have
this static bridge(s) permanently opened.
By the way, it's interesting to know that you
can either use it as a
daemon bridge (a2jmidid) or as a static bridge (which may be, I think,
described as a "pipe") by using a2jmidi_bridge and/or j2amidi_bridge.
I just precise this, because I turned a bit around before finding it
(the problem was that a2jmidid didn't catch every midi ports, for some
reason, especially for video and lights softwares).
You did check "a2jmidid -e" to see more midi ports?
Arnold
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
--
Aurélien
2:58 p.m.
On Mon, Oct 05, 2009 at 03:58:46PM -0400, Paul Davis wrote:
On Mon, Oct 5, 2009 at 3:50 PM, Atte Andre Jensen
<atte.jensen(a)gmail.com> wrote:
There is no such option -X on jackd! I'm running 0.116.1
Hi
I'd like to play azr-3 from my usb midi keyboard. However in qjackctl
the keyboard shows up as alsa midi and azr-3 shows up as jack midi (as
far as I understand it).
How do I go about this? I seem to remember some solution that let's alsa
mide show up as jack midi or the other way around. But I couldn't even
dig it out from google.
Any help appreciated, thanks in advance.
make sure you either
(a) run the ALSA backend's JACK/ALSA bridge (-X seq on the command
line, or lower left
corner of qjackct's setup dialog)
(b) run a bridge client such as a2jmidid
I tried it, and had terrible stuck-notes problems. Instead I've been using a
slightly-hacked alsaseq2jackmidi daemon for years with decent results.
-ken
3:20 p.m.
On Tue, Oct 6, 2009 at 12:57 PM, Ken Restivo <ken(a)restivo.org> wrote:
i totally rewrote the inner core of a2jmidid several months ago. it
will resurface inside the JACK ALSA backend whenever i can find a day
without 48 hrs of work to be done.
There is no such option -X on jackd! I'm running
0.116.1
jackd -d alsa --help
(b) run a
bridge client such as a2jmidid
I tried it, and had terrible stuck-notes problems. Instead I've been using a
slightly-hacked alsaseq2jackmidi daemon for years with decent results.
3:48 p.m.
On Tue, Oct 06, 2009 at 01:20:54PM -0400, Paul Davis wrote:
i totally rewrote the inner core of a2jmidid several months ago. it
will resurface inside the JACK ALSA backend whenever i can find a day
without 48 hrs of work to be done.
Best of luck with that :-/
-ken
On Tue, Oct 6, 2009 at 12:57 PM, Ken Restivo
<ken(a)restivo.org> wrote:
Fantastic, thanks!
There is no such option -X on jackd! I'm
running 0.116.1
jackd -d alsa --help
? (b) run
a bridge client such as a2jmidid
I tried it, and had terrible stuck-notes problems. Instead I've been using a
slightly-hacked alsaseq2jackmidi daemon for years with decent results.
5:09 p.m.
On Tuesday 06 October 2009 18:57:21 Ken Restivo wrote:
On Mon, Oct 05, 2009 at 03:58:46PM -0400, Paul Davis
wrote:
Be aware that this is backend dependent. And actually only present with the
alsa backend. Thats why a2jmidid got the -e flag to also export/bridge hardware
ports...
Arnold
make sure you either
(a) run the ALSA backend's JACK/ALSA bridge (-X seq on the command
line, or lower left
corner of qjackct's setup dialog)
There is no such option -X on jackd!
I'm running 0.116.1
5570
days inactive
5571
days old
linux-audio-user@lists.linuxaudio.org
9 comments
5 participants
participants (5)
-
Arnold Krille -
Atte Andre Jensen -
Aurelien -
Ken Restivo -
Paul Davis