2 Aug
2006
2 Aug
'06
6:18 a.m.
All,
I'm using a Midisport 2x2 with my Gentoo Linux x86 box.
After booting (2.6.16 kernel, with or without realtime
patch) my Midisport isn't recognized. However, after
disconnecting and reconnecting it, it works fine - the
firmware gets loaded, and I can start Jack and pass MIDI
data through it. (I already got hold of the firmware file,
set up the udev rule and all that jazz.)
I've googled, but haven't found anything that helps. Any
suggestions how to get the Midisport to start straight from
boot? It's only a little niggle, but it would help getting
things running a bit more smoothly.
Peter C
2 Aug
2 Aug
7:19 a.m.
New subject: [linux-audio-user] Why doesn't udev start my Midisport at boot time?
Peter Clarke kirjoitti:
All,
I'm using a Midisport 2x2 with my Gentoo Linux x86 box.
After booting (2.6.16 kernel, with or without realtime
patch) my Midisport isn't recognized. However, after
disconnecting and reconnecting it, it works fine - the
firmware gets loaded, and I can start Jack and pass MIDI
data through it. (I already got hold of the firmware file,
set up the udev rule and all that jazz.)
Which version of udev do you have? If you are using Gentoo stable and have
udev-087-r1 or older, you either need coldplug installed, or have to load the
module(s) manually at boot ( see /etc/modules.autoload.d/kernel-2.6 )
I've googled, but haven't found anything that
helps. Any
suggestions how to get the Midisport to start straight from
boot? It's only a little niggle, but it would help getting
things running a bit more smoothly.
Peter C
--
| me@home ~$whoami ^ ^ | "Trust me, I know what I'm doing!" |
| Jouni 'Mad Max' Rinne ('x') | - Sledge Hammer |
| me@home ~$man woman C " " | -------[ph34r t3h p3Ngu1n]-------- |
| Segmentation fault (core dumped) | l33tmmx at sci dot fi |
6741
days inactive
6741
days old
linux-audio-user@lists.linuxaudio.org
1 comments
2 participants
participants (2)
-
Jouni Rinne -
Peter Clarke