14 Sep
2005
14 Sep
'05
6:35 a.m.
Hi,
having my RME hdsp pcmcia card inserted in my laptop on startup
results in assigning it card number 0 and assigning the built-in
soundcard card number 1. I'd prefer it the other way round, so that
the internal card *always* gets number 0, no matter whether the pcmcia
card is present or not. It used to work that way with a 2.4 setup and
alsa 1.0.4.
My current setup uses debian sarge and a custom 2.6.13.1 kernel.
This is in my modules.conf:
alias snd-card-0 snd-intel8x0
alias snd-card-1 snd-virmidi
alias snd-card-2 snd-hdsp
I also cannot rmmod the snd-intel8x0 once the computer has booted
despite the fact, that no program is claiming it. With the old setup I
remember that stopping alsa (in /etc/init.d) resulted in a removal of
all snd_* modules.
--
Orm
14 Sep
14 Sep
8 a.m.
On Wednesday 14 Sep 2005 9:32 am, Orm Finnendahl wrote:
Hi,
having my RME hdsp pcmcia card inserted in my laptop on startup
results in assigning it card number 0 and assigning the built-in
soundcard card number 1. I'd prefer it the other way round, so that
the internal card *always* gets number 0, no matter whether the pcmcia
card is present or not. It used to work that way with a 2.4 setup and
alsa 1.0.4.
My current setup uses debian sarge and a custom 2.6.13.1 kernel.
This is in my modules.conf:
alias snd-card-0 snd-intel8x0
alias snd-card-1 snd-virmidi
alias snd-card-2 snd-hdsp
I also cannot rmmod the snd-intel8x0 once the computer has booted
despite the fact, that no program is claiming it. With the old setup I
remember that stopping alsa (in /etc/init.d) resulted in a removal of
all snd_* modules.
--
Orm
Hi Orm. If you add options lines in /etc/modutils/sound as follows, you should
find that the cards load in the order you want.
options snd-intel8x0 index=0
options snd-hdsp index=1
options snd-virmidi index=2
Then run update-modules and /etc/modules.conf will be updated with the options
added to it
I had a similar problem with my usb midi keyboard being loaded first , and
setting the options fixed that. All the best. Nigel.
10:51 a.m.
On Wed, 2005-09-14 at 10:32 +0200, Orm Finnendahl wrote:
Hi,
having my RME hdsp pcmcia card inserted in my laptop on startup
results in assigning it card number 0 and assigning the built-in
soundcard card number 1. I'd prefer it the other way round, so that
the internal card *always* gets number 0, no matter whether the pcmcia
card is present or not. It used to work that way with a 2.4 setup and
alsa 1.0.4.
My current setup uses debian sarge and a custom 2.6.13.1 kernel.
This is in my modules.conf:
alias snd-card-0 snd-intel8x0
alias snd-card-1 snd-virmidi
alias snd-card-2 snd-hdsp
add:
options snd-intel8x0 index=0
options snd-hdsp index=1
and you should be good to go. i believe the default order these days is
based on PCI bus device numbering. it could be something even more
random.
I also cannot rmmod the snd-intel8x0 once the computer
has booted
despite the fact, that no program is claiming it. With the old setup I
remember that stopping alsa (in /etc/init.d) resulted in a removal of
all snd_* modules.
not sure about that. does rmmod claim that its in use? does lsmod show
which other modules are using it?
--p
11:30 a.m.
On Wed, 14 Sep 2005 08:52:28 -0400
Paul Davis <paul(a)linuxaudiosystems.com> wrote:
options snd-intel8x0 index=0
options snd-hdsp index=1
and you should be good to go. i believe the default order these days is
based on PCI bus device numbering. it could be something even more
random.
AFAIK it's based on the order in which the modules get loaded. First one
gets index=0, next one index=1, etc, unless overridden.
Regards,
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
11:50 a.m.
On Wed, 14 Sep 2005 at 08:52 -0400, Paul Davis wrote:
I was helping my brother set up a sound card last night in a box with an
onboard intel8x0 card and we had the same problem. Can't unload
snd-intel8x0. lsmod said 1, but listed no modules. lsof /dev/snd/*
showed nothing.
--
Hans Fugal | If more of us valued food and cheer and
http://hans.fugal.net/ | song above hoarded gold, it would be a
http://gdmxml.fugal.net/ | merrier world.
| -- J.R.R. Tolkien
---------------------------------------------------------------------
GnuPG Fingerprint: 6940 87C5 6610 567F 1E95 CB5E FC98 E8CD E0AA D460
I also cannot
rmmod the snd-intel8x0 once the computer has booted
despite the fact, that no program is claiming it. With the old setup I
remember that stopping alsa (in /etc/init.d) resulted in a removal of
all snd_* modules.
not sure about that. does rmmod claim that its in use? does lsmod show
which other modules are using it? 
2:38 p.m.
On Wed, 14 Sep 2005 at 18:20 +0200, Clemens Ladisch wrote:
Hans Fugal wrote:
Checked that too, and /dev/mixer, /dev/sequencer too. Nothing was accessing
those either.
--
Hans Fugal | If more of us valued food and cheer and
http://hans.fugal.net/ | song above hoarded gold, it would be a
http://gdmxml.fugal.net/ | merrier world.
| -- J.R.R. Tolkien
---------------------------------------------------------------------
GnuPG Fingerprint: 6940 87C5 6610 567F 1E95 CB5E FC98 E8CD E0AA D460
Can't unload snd-intel8x0. lsmod said 1, but
listed no modules.
lsof /dev/snd/* showed nothing.
Some old sound daemon hanging around would typically use the OSS
interface, so try "lsof /dev/dsp*", too.
7015
days inactive
7015
days old
linux-audio-user@lists.linuxaudio.org
6 comments
6 participants
participants (6)
-
Clemens Ladisch -
Florian Schmidt -
Hans Fugal -
nigel henry -
Orm Finnendahl -
Paul Davis