1 Apr
2016
1 Apr
'16
12:24 p.m.
OK, got it working, used .~/asoundrc
pcm_slave.sl3 {
pcm "plughw:1,0"
channels 2
rate 44100
}
pcm.complex_convert {
type plug
format S16_LE
slave sl3
}
And the darkice.cfg input section is
[input]
device = plughw:1,0 # Alsa soundcard device for the
audio input (barenger)
sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or
44100
bitsPerSample = 16
channel = 2 # channels. 1 = mono, 2 = stereo
Ben
On 01/04/2016 11:03, Niels Dettenbach wrote:
Am Freitag, 1. April 2016, 10:53:03 schrieb Ben
Edwards:
--
*Ben Edwards, Video Editor/Colorist & Cameraman*
w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu
If you are a freelancer FreeAgent is a great system to do your accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.
OK, just tried that
...i've figured
out that we have a few 24bit consumer interfaces (USB) too
running with darkice.
so it *should* work...
could you try pls:
device = plughw:0
or
device = plughw:1
instead?
I had to use this instead of the
device = hw:0,0
If that did not help, i would try to disable realtime for first until it is
working (just as a shot)...
hth 
1 Apr
1 Apr
2:12 p.m.
New subject: [darkice] (SOLVED) Re: Cant Get Creative E-MU USB audio interface to work
I would state with almost absolute certainty that your .asoundrc file has
no part to play here. The thing that made it work is telling darkice to use
plughw:.... rather than hw:... which allows ALSA to fake the hardware setup
that darkice says it wants. When you use hw:... you can only use hardware
parameters that are directly supported by the hardware itself, which
sometimes are not the ones you want/need to use.
On Fri, Apr 1, 2016 at 6:24 AM, Ben Edwards <ben(a)funkytwig.com> wrote:
OK, got it working, used .~/asoundrc
pcm_slave.sl3 {
pcm "plughw:1,0"
channels 2
rate 44100
}
pcm.complex_convert {
type plug
format S16_LE
slave sl3
}
And the darkice.cfg input section is
[input]
device = plughw:1,0 # Alsa soundcard device for the audio
input (barenger)
sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or 44100
bitsPerSample = 16
channel = 2 # channels. 1 = mono, 2 = stereo
Ben
On 01/04/2016 11:03, Niels Dettenbach wrote:
Am Freitag, 1. April 2016, 10:53:03 schrieb Ben Edwards:
OK, just tried that
...i've figured out that we have a few 24bit consumer interfaces (USB) too
running with darkice.
so it *should* work...
could you try pls:
device = plughw:0
or
device = plughw:1
instead?
I had to use this instead of the
device = hw:0,0
If that did not help, i would try to disable realtime for first until it is
working (just as a shot)...
hth
--
*Ben Edwards, Video Editor/Colorist & Cameraman*
w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu
If you are a freelancer FreeAgent is a great system to do your accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
2:35 p.m.
New subject: [darkice] (SOLVED & simplified) Re: Cant Get Creative E-MU USB audio interface to work
I think this is indeed the case. I was finding the cron run from root
worked also and the .asoundrc was in the pi user.
Makes it even simpler.
On 01/04/2016 13:12, Paul Davis wrote:
I would state with almost absolute certainty that your
.asoundrc file
has no part to play here. The thing that made it work is telling
darkice to use plughw:.... rather than hw:... which allows ALSA to
fake the hardware setup that darkice says it wants. When you use
hw:... you can only use hardware parameters that are directly
supported by the hardware itself, which sometimes are not the ones you
want/need to use.
On Fri, Apr 1, 2016 at 6:24 AM, Ben Edwards <ben(a)funkytwig.com
<mailto:ben@funkytwig.com>> wrote:
OK, got it working, used .~/asoundrc
pcm_slave.sl3 {
pcm "plughw:1,0"
channels 2
rate 44100
}
pcm.complex_convert {
type plug
format S16_LE
slave sl3
}
And the darkice.cfg input section is
[input]
device = plughw:1,0 # Alsa soundcard device for
the audio input (barenger)
sampleRate = 44100 # sample rate in Hz. try 11025,
22050 or 44100
bitsPerSample = 16
channel = 2 # channels. 1 = mono, 2 = stereo
Ben
On 01/04/2016 11:03, Niels Dettenbach wrote:
--
*Ben Edwards, Video Editor/Colorist & Cameraman*
w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu
If you are a freelancer FreeAgent is a great system to do your accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.
Am Freitag, 1. April 2016, 10:53:03 schrieb
Ben Edwards:
--
*Ben Edwards, Video Editor/Colorist & Cameraman*
w:www.funkytwig.com <http://www.funkytwig.com> t. 01179 118 144
m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu <http://pgp.mit.edu>
If you are a freelancer FreeAgent is a great system to do your
accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
<mailto:Linux-audio-user@lists.linuxaudio.org>
http://lists.linuxaudio.org/listinfo/linux-audio-user
OK, just tried that
...i've
figured out that we have a few 24bit consumer interfaces (USB) too
running with darkice.
so it *should* work...
could you try pls:
device = plughw:0
or
device = plughw:1
instead?
I had to use this instead of the
device = hw:0,0
If that did not help, i would try to disable realtime for first until it is
working (just as a shot)...
hth 
7:01 p.m.
New subject: [darkice] (SOLVED) Re: Cant Get Creative E-MU USB audio interface to work
On Fri, April 1, 2016 5:24 am, Ben Edwards wrote:
And the darkice.cfg input section is
[input]
device = plughw:1,0 # Alsa soundcard device for the
audio input (barenger)
sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or
44100
bitsPerSample = 16
channel = 2 # channels. 1 = mono, 2 = stereo
Why not just change the darkice.cfg to use bitsPerSample = 24 if the
sound card is 24 bits? Seems that would have been simpler than all that
messing about with asound.rc.
--
Chris Caudle
2956
days inactive
2956
days old
linux-audio-user@lists.linuxaudio.org
3 comments
3 participants
participants (3)
-
Ben Edwards -
Chris Caudle -
Paul Davis