31 Oct
2009
31 Oct
'09
10:32 p.m.
frank pirrone wrote:
David,
Here's my /var/lib/alsa/asound.state file. You can try moving yours
aside by renaming it, and dropping this in to see if it makes any
difference. I have the Audigy2 card in this ArtistX/Ubuntu 9.10 Dell
Workstation, and it is fully functional.
Amazing! Eureka etc. Thanks very much indeed, Frank. I've put about 15
hours into this problem and you've solved it. Now the question is, how
did a bad asound.state file get created as a default during
installation? Does anyone know where I should go to alert someone who
can look at this?
Here is a comparison of the good and bad asound.state files.
The replacement asound.state file has 227 controls vs 216 for the oroginal.
The following 14 switch controls existed only in the good file.
The Master Playback Switch only existed in the good file. If it exists
on the sound card and is muted by default, there would be no sound output.
There are 3 possible duplicated controls.
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value true
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value true
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Side Playback Switch'
value.0 true
value.1 true
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Line Playback Switch'
value.0 true
value.1 true
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Mic Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
control.21 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
-----------------
The following controls existed in both files.
Bad file, Good file
Control 29 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Tone Control - Switch'
value.0 false
value.1 falseiface MIXER
Bad file, Good file
control.31 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'IEC958 Optical Raw Playback Switch'
value.0 false
value.1 false
Bad file, Good file NB also see control 13, an apparent duplicate
control.35 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Headphone Playback Switch'
value true
Bad file, Good file
control.39 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PC Speaker Playback Switch'
value true
Bad file, Good file
control.41 {There is a file that describes the state of the sound card
in /var/lib/alsa/asound.state. When the original (bad) version was
replaced with one from a working Audigy2 sound cared (good version) the
card started working.
The replacement asound.state file has 227 controls vs 216 for the oroginal.
The following 14 switch controls existed only in the good file.
The Master Playback Switch only existed in the good file. If it exists
on the sound card and is muted by default, there would be no sound output.
There are 3 possible duplicated controls.
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value true
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value true
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Side Playback Switch'
value.0 true
value.1 true
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Line Playback Switch'
value.0 true
value.1 true
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Mic Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
control.21 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
-----------------
The following controls existed in both files.
Bad file, Good file
Control 29 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Tone Control - Switch'
value.0 false
value.1 falseiface MIXER
Bad file, Good file
control.31 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'IEC958 Optical Raw Playback Switch'
value.0 false
value.1 false
Bad file, Good file NB also see control 13, an apparent duplicate
control.35 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Headphone Playback Switch'
value true
Bad file, Good file
control.39 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PC Speaker Playback Switch'
value true
Bad file, Good file
control.41 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value true
Bad file, Good file NB also see control 9, a possible duplicate
control.46 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Playback Switch'
value true
Bad file, Good file NB also see control 7, a possible duplicate.
control.48 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'CD Playback Switch'
value true
Bad file, Good file
control.52 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Aux Playback Switch'
value true
Bad file, Good file
control.60 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name '3D Control - Switch'
value false
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value true
Bad file, Good file NB also see control 9, a possible duplicate
control.46 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Playback Switch'
value true
Bad file, Good file NB also see control 7, a possible duplicate.
control.48 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'CD Playback Switch'
value true
Bad file, Good file
control.52 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Aux Playback Switch'
value true
Bad file, Good file
control.60 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name '3D Control - Switch'
value false
--
David Morrell
Web site: www.davidmorrell.ozeweb.net (when I get it on air again :)
<http://www.davidmorrell.ozeweb.net>
Email: dsmorrell56(a)dodo.com.au <mailto:dsmorrell56@dodo.com.au>
Ph: 0408 842 955 / 03 6343 5131
1 Nov
1 Nov
4:29 a.m.
New subject: Audigy soundcard silent after upgrade to Ubuntu Studio
David Morrell wrote:
frank pirrone wrote:
Excellent, David! I'm delighted it worked and was that simple.
As far as the non-functional setup goes, this card is a little flaky - I
mean, that inconsistency in the D/A jack switch alone is illustrative of
that. There are a number of mutes present and countless sliders, many
of which have unclear functions with conventional stereo output, and all
it takes is either something to be muted - or un-muted in the case of
that D/A jack and the particular buggy kernels - or something to be slid
down, for there to be no sound for a given input/channel.
David,
Here's my /var/lib/alsa/asound.state file. You can try moving yours
aside by renaming it, and dropping this in to see if it makes any
difference. I have the Audigy2 card in this ArtistX/Ubuntu 9.10 Dell
Workstation, and it is fully functional.
Amazing! Eureka etc. Thanks very much indeed, Frank. I've put about 15
hours into this problem and you've solved it. Now the question is, how
did a bad asound.state file get created as a default during
installation? Does anyone know where I should go to alert someone who
can look at this?
Here is a comparison of the good and bad asound.state
files.
The replacement asound.state file has 227 controls vs 216 for the original.
The following 14 switch controls existed only in the good file.
The Master Playback Switch only existed in the good file. If it exists
on the sound card and is muted by default, there would be no sound output.
Hmm, that's worse than I suggested above. Well, maybe not. Once you've
executed alsamixer for the first time - and realize, this card may not
be properly "awakened" via one of the desktop environment's GUI mixers -
and exited, the asound.state file should be updated, but just to be
certain, I'd execute a sudo alsactl store command. Do a stat
/var/lib/alsa/asound.state to see the time stamp to ensure it's a fresh
write.
So, maybe the core code is not entirely to blame for this problem.
There should be a post-inst script that does all this, and I believe the
alsamixer CLI application accepts arguments to set the channel mutes and
levels, but if any distro leaves that out - and it of course wouldn't be
executed unless the Audigy was detected - it's going to be up to the
desktop, or the GUI mixer app, or the user to "wake up" the card when
first used.
Frank
3 Nov
3 Nov
5:38 a.m.
New subject: Audigy soundcard silent after upgrade to Ubuntu Studio
Here's the next instalment. First, the background.
The problem was that a Creative Audigy2 card that had worked perfectly
in Ubuntu 8.04 suddenly went silent after an upgrade to Ubuntu Studio
9.04. It still worked perfectly in Windows on the same dual boot machine.
David Morrell wrote:
frank pirrone wrote:
I've done a bit more testing and reported it on the Ubuntu
bug reporting
system as follows. The bug is at;
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/406356
To reproduce the bug then repair the damage, do the following.
Delete /var/lib/asound.state (to mimic a fresh install, when it has not
yet been created)
Run
alsactl init
The sound card is probed. Alsactl reports;
Unknown hardware: "Audigy2" "SigmaTel STAC9750,51"
"AC97a:83847650"
"" ""
Hardware is initialized using a guess method
A version of asound.state is created that lacks (at least) a master
volume mute switch. There is no sound output.
Restore the previously good asound.state, run 'alsactl restore' and the
card works again.
Does this mean that something (I don't know what) needs to be improved
so it can recognise this card (Audigy 2 Value [SB0400)?
--
David Morrell
Web site: www.davidmorrell.ozeweb.net (when I get it on air again :)
<http://www.davidmorrell.ozeweb.net>
Email: dsmorrell56(a)dodo.com.au <mailto:dsmorrell56@dodo.com.au>
Ph: 0408 842 955 / 03 6343 5131
Here's my /var/lib/alsa/asound.state file.
You can try moving yours
aside by renaming it, and dropping this in to see if it makes any
difference. I have the Audigy2 card in this ArtistX/Ubuntu 9.10 Dell
Workstation, and it is fully functional.
Amazing! Eureka etc. Thanks very much indeed, Frank. I've put about 15
hours into this problem and you've solved it. Now the question is, how
did a bad asound.state file get created as a default during
installation? Does anyone know where I should go to alert someone who
can look at this?
4:20 p.m.
New subject: Audigy soundcard silent after upgrade to Ubuntu Studio
David Morrell wrote:
Here's the next instalment. First, the
background.
The problem was that a Creative Audigy2 card that had worked perfectly
in Ubuntu 8.04 suddenly went silent after an upgrade to Ubuntu Studio
9.04. It still worked perfectly in Windows on the same dual boot machine.
<snip>
I've done a bit more testing and reported it on the Ubuntu bug reporting
system as follows. The bug is at;
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/406356
To reproduce the bug then repair the damage, do the following.
Delete /var/lib/asound.state (to mimic a fresh install, when it has not
yet been created)
Run
alsactl init
The sound card is probed. Alsactl reports;
Unknown hardware: "Audigy2" "SigmaTel STAC9750,51"
"AC97a:83847650"
"" ""
Hardware is initialized using a guess method
A version of asound.state is created that lacks (at least) a master
volume mute switch. There is no sound output.
Restore the previously good asound.state, run 'alsactl restore' and the
card works again.
Does this mean that something (I don't know what) needs to be improved
so it can recognise this card (Audigy 2 Value [SB0400)?
David,
My understanding was that the functionality/setup of the Audigy driver
was buggered in the 9.04 J.J. kernel module. Once you've fiddled with
alsamixer, and created a working /var/lib/alsa/asound.state file it
should be fine. I believe this is fixed in the 9.10 K.K. version.
Frank
5297
days inactive
5300
days old
linux-audio-user@lists.linuxaudio.org
3 comments
2 participants
participants (2)
-
David Morrell -
frank pirrone