21 Dec
2006
21 Dec
'06
8:28 p.m.
Folks,
How can I hear Ardour's click signal ?
I'm using a MAudio 1010LT and once the click button is pressed in
Ardour I can see a corresponding signal in envy24control PCM Out 5
view meter. And in fact, the click out in connected to playback5 in
qjackctl. Raising the volume of the PCM Out 5 does nothing. Do I
have to run a physical wire from that 1010LT output to benefit from
this option? If so, I only have a pair of stereo speakers connected to
outputs 1 and 2.
Thanks,
Al
21 Dec
21 Dec
8:37 p.m.
On Thu, 21 Dec 2006 19:03:58 -0500
lanas <lanas(a)securenet.net> wrote:
How can I hear Ardour's click signal ?
I'm using a MAudio 1010LT and once the click button is pressed in
Ardour I can see a corresponding signal in envy24control PCM Out 5
view meter.
There's a click tab in the options window, and in it you can assign the
channel the click plays on.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa
8:40 p.m.
On Thu, 2006-12-21 at 19:03 -0500, lanas wrote:
Folks,
How can I hear Ardour's click signal ?
I'm using a MAudio 1010LT and once the click button is pressed in
Ardour I can see a corresponding signal in envy24control PCM Out 5
view meter. And in fact, the click out in connected to playback5 in
qjackctl. Raising the volume of the PCM Out 5 does nothing. Do I
have to run a physical wire from that 1010LT output to benefit from
this option? If so, I only have a pair of stereo speakers connected to
outputs 1 and 2.
I think the PCM output ports correspond to the physical outputs on the
card. So you have to connect the click out to output 1 and/or 2.
Lee
22 Dec
22 Dec
1:20 p.m.
Hi!
Alle 01:03, venerdì 22 dicembre 2006, lanas ha scritto:
Folks,
How can I hear Ardour's click signal ?
I'm using a MAudio 1010LT and once the click button is pressed in
Ardour I can see a corresponding signal in envy24control PCM Out 5
view meter. And in fact, the click out in connected to playback5 in
qjackctl. Raising the volume of the PCM Out 5 does nothing. Do I
have to run a physical wire from that 1010LT output to benefit from
this option? If so, I only have a pair of stereo speakers connected to
outputs 1 and 2.
When you raise the PCM Out 5 volume, the volume is raised with regard to the
internal mixer of the sound card. So, you have to select Digital Mix L/R in
the Patchbay/Router for H/W Out 1 and 2 (and raise the volume for the other
PCM or HW channel accordingly to your needs).
At least, this works on my Delta 44, I think they are more or less the same.
Byez!
Carotinho
Chiacchiera con i tuoi amici in tempo reale!
http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com
6549
days inactive
6550
days old
linux-audio-user@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Carotinho -
Joe Hartley -
lanas -
Lee Revell