28 Feb
2008
28 Feb
'08
8:09 a.m.
Just a quick note about a quick release:
JackMix 0.4.1 is out!
Get it from http://www.arnoldarts.de/drupal/?q=JackMix%3Aintro or directly via
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.4.1.tar.gz
This is "only" a buildsystem release. But now it should work. The detection of
the qt-specific compilers (moc/uic/rcc) should not be a problem anymore.
Building also got easier, it is just calling "scons" and watch for everything
to happen by itself. Except for installation. You currently have to copy the
binary by hand to your destination of choice. But its only that binary that
is needed.
For those who don't know (and don't want to look at the above mentioned
website), JackMix is a small but powerful mixer for jack, featuring a
configurable number of inputs and outputs, providing a NxM mixing-matrix and
allowing to combine these mixing-nodes into bigger ones with other controls.
So you can combine some nodes to become for example a 2in-2out stereo node.
Its hard to explain, look at it for yourself...
Probably some of my other pets will also see a minor-release the next days
with the same changes to the buildsystem, so if you run into any problems,
just let me know!
Have fun,
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your
administrator to do so...
28 Feb
28 Feb
9 a.m.
Arnold,
This is what I get.
/jackmix-0.4.1# scons
scons: Reading SConscript files ...
Configuring qt4muc...
Checking if the output of 'moc -v' contains 'Qt 4.' (cached) no
Checking if the output of 'moc4 -v' contains 'Qt 4.' (cached) no
Checking if the output of 'moc-qt4 -v' contains 'Qt 4.' (cached) no
Does it means that I don't have qt 2.4? How should I install that on
Debian (what the exact name(s) of the packages)? What about lash-1, it
isn't in the debian repo is it? This are the lash(es) I have:
lash-bin
- Linux Audio Session Handler (LASH) example clients
lash-doc
- Linux Audio Session Handler (LASH) documentation
lashd
regards,
Dirk
Arnold Krille wrote:
Just a quick note about a quick release:
JackMix 0.4.1 is out!
Get it from http://www.arnoldarts.de/drupal/?q=JackMix%3Aintro or directly via
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.4.1.tar.gz
This is "only" a buildsystem release. But now it should work. The detection of
the qt-specific compilers (moc/uic/rcc) should not be a problem anymore.
Building also got easier, it is just calling "scons" and watch for everything
to happen by itself. Except for installation. You currently have to copy the
binary by hand to your destination of choice. But its only that binary that
is needed.
For those who don't know (and don't want to look at the above mentioned
website), JackMix is a small but powerful mixer for jack, featuring a
configurable number of inputs and outputs, providing a NxM mixing-matrix and
allowing to combine these mixing-nodes into bigger ones with other controls.
So you can combine some nodes to become for example a 2in-2out stereo node.
Its hard to explain, look at it for yourself...
Probably some of my other pets will also see a minor-release the next days
with the same changes to the buildsystem, so if you run into any problems,
just let me know!
Have fun,
Arnold
------------------------------------------------------------------------
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
4:25 p.m.
Am Donnerstag, 28. Februar 2008 13:08:55 schrieb Arnold Krille:
Just a quick note about a quick release:
JackMix 0.4.1 is out!
Get it from http://www.arnoldarts.de/drupal/?q=JackMix%3Aintro or directly
via
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.4.1.tar.g
z
Have fun,
Arnold
Hello
Thanks, it's build and run well on my debian/sid. I get one small warning :
g++ -o
libgui/knob.o -c -pthread -Wall -Werror -g -fpic -DQT_SHARED -I. -I/usr/include/qt4
-I/usr/include/qt4/QtCore -Ilibgui -Ilibcore
libgui/knob.cpp
ar rc libgui/libjackmix_gui.a libgui/channelselector.o
libgui/graphicalguiserver.o libgui/abstractslider.o libgui/slider.o
libgui/knob.o
ranlib libgui/libjackmix_gui.a
moc-qt4 libmatrix/mixingmatrix.h > libmatrix/mixingmatrix.moc
moc-qt4 libmatrix/mixingmatrix_privat.h > libmatrix/mixingmatrix_privat.moc
libmatrix/mixingmatrix_privat.h:0: Warning: No relevant classes found. No
output generated.
hermann
5:37 p.m.
Excellent. I had an issue with a previous version of JackMix where if I
loaded a saved configuration file from the command line the mixer levels
wouldn't be set to correctly until I fiddled with the knobs. Has this issue
been fixed?
On Thu, Feb 28, 2008 at 4:08 AM, Arnold Krille <arnold(a)arnoldarts.de> wrote:
Just a quick note about a quick release:
JackMix 0.4.1 is out!
Get it from http://www.arnoldarts.de/drupal/?q=JackMix%3Aintro or directly
via
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.4.1.tar.gz
This is "only" a buildsystem release. But now it should work. The
detection of
the qt-specific compilers (moc/uic/rcc) should not be a problem anymore.
Building also got easier, it is just calling "scons" and watch for
everything
to happen by itself. Except for installation. You currently have to copy
the
binary by hand to your destination of choice. But its only that binary
that
is needed.
For those who don't know (and don't want to look at the above mentioned
website), JackMix is a small but powerful mixer for jack, featuring a
configurable number of inputs and outputs, providing a NxM mixing-matrix
and
allowing to combine these mixing-nodes into bigger ones with other
controls.
So you can combine some nodes to become for example a 2in-2out stereo
node.
Its hard to explain, look at it for yourself...
Probably some of my other pets will also see a minor-release the next days
with the same changes to the buildsystem, so if you run into any problems,
just let me know!
Have fun,
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and
send me
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your
administrator to do so...
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
29 Feb
29 Feb
4:58 a.m.
Am Donnerstag, 28. Februar 2008 schrieb Miguel:
Excellent. I had an issue with a previous version of
JackMix where if I
loaded a saved configuration file from the command line the mixer levels
wouldn't be set to correctly until I fiddled with the knobs. Has this
issue been fixed?
No, since no one reported that until now. But there is a more severe crash
currently happening (at least in my trunk) where jackmix crashes when loading
files. :-(
But this release really just contains changes on the buildsystem...
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your
administrator to do so...
11:41 a.m.
I cannot build it on Slacware 11 + QT 4.3.2 installed in /opt/qt-4.3.2
I had to modify $PATH in order to list /opt/qt-4.3.2/bin first,
otherwise scons would detect qt3 instead...
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$ scons
scons: Reading SConscript files ...
Configuring qt4muc...
Checking if the output of 'moc -v' contains 'Qt 4.' ok
Checking if the output of 'uic -v' contains '4.' ok
Checking if the output of 'rcc -v' contains '4.' ok
Done. Will define a more or less automatic environment to do all the
qt-specific stuff.
AttributeError: 'module' object has no attribute 'SourceFileScanner':
File "/tmp/package-scons/usr//lib/scons/SCons/Script/__init__.py",
line 1103:
None
File "/tmp/package-scons/usr//lib/scons/SCons/Script/__init__.py",
line 1097:
None
File "/tmp/package-scons/usr//lib/scons/SCons/Script/__init__.py",
line 903:
None
File "/tmp/package-scons/usr//lib/scons/SCons/Script/SConscript.py",
line 239:
None
File "SConstruct", line 8:
env = Environment( tools=['default', 'pkgconfig', 'qt4muc' ],
toolpath=['admin'] )
File "/tmp/package-scons/usr//lib/scons/SCons/Environment.py", line 266:
None
File "/tmp/package-scons/usr//lib/scons/SCons/Environment.py", line 122:
None
File "/tmp/package-scons/usr//lib/scons/SCons/Environment.py", line 906:
None
File "/tmp/package-scons/usr//lib/scons/SCons/Tool/__init__.py", line 53:
None
File "admin/qt4muc.py", line 392:
SCons.Tool.SourceFileScanner.add_scanner( '.cpp',
SCons.Scanner.Scanner( uic_scanner, skeys=[".h"], recursive=1 ) )
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
Hope this helps, ciao!
--
salvuz
POST FATA RESVRGO
Linux registered user #291700 | machine #174619
get counted on ---> http://counter.li.org/ <---
1:12 p.m.
Am Freitag, 29. Februar 2008 schrieb Salvatore Di Pietro:
I cannot build it on Slacware 11 + QT 4.3.2 installed
in /opt/qt-4.3.2
I had to modify $PATH in order to list /opt/qt-4.3.2/bin first,
otherwise scons would detect qt3 instead...
Hehe, well, I can't think of every possibility for directories where the qt
stuff might be. Okay, I could use the lib-path pkg-config returns. But I
don't know wether pkg-config finds qt if its installed in that place, without
modification of the PKG_CONFIG_PATH variable...
qt-specific stuff.
AttributeError: 'module' object has no attribute 'SourceFileScanner':
File "/tmp/package-scons/usr//lib/scons/SCons/Script/__init__.py",
line 1103:
None
<snip>
SCons.Tool.SourceFileScanner.add_scanner(
'.cpp',
SCons.Scanner.Scanner( uic_scanner, skeys=[".h"], recursive=1 ) )
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
This is interesting. Which version of scons and python are you using?
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your
administrator to do so...
1:46 p.m.
Arnold Krille wrote:
I upgraded scons to 0.97 from 0.96.1 (Python is 2.4.3) and it seems to
be better.
But still...
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
PKG_CONFIG_PATH=/opt/qt-4.3.2/lib/pkgconfig:/usr/lib/pkgconfig:/opt/kde/lib/pkgconfig:/usr/local/lib/pkgconfig:/opt/kde/lib/pkgconfig
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
PATH=/opt/qt-4.3.2/bin:/usr/local/bin:/usr/bin:/sbin:/bin:/usr/X11R6/bin:/usr/games:/opt/www/htdig/bin:/opt/kde/bin:/usr/share/texmf/bin:.:/opt/kde/bin:/opt/java/bin:/opt/java/jre/bin:/opt/netbeans/bin:/opt/schily/bin:/home/salvuz/Programmi/scripts
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$ scons
scons: Reading SConscript files ...
Configuring qt4muc...
Checking if the output of 'moc -v' contains 'Qt 4.' (cached) yes
Checking if the output of 'uic -v' contains '4.' (cached) yes
Checking if the output of 'rcc -v' contains '4.' (cached) yes
Done. Will define a more or less automatic environment to do all the
qt-specific stuff.
Checking for C header file stdio.h... yes
Checking for C++ header file iostream... yes
Checking for pkg-config (at least version 0.0.0)... yes
Checking for lash-1.0 (0.5.1 or higher)... yes
Checking for QtXml (4.2 or higher)... no
Checking for QtCore (4.2 or higher)... no
Checking for jack (0.100.0 or higher)... yes
Checking for QtGui (4.2 or higher)... no
(At least) One of the dependencies is missing. I can't go on without it...
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
are we closer?
--
salvuz
POST FATA RESVRGO
Linux registered user #291700 | machine #174619
get counted on ---> http://counter.li.org/ <---
Hehe, well, I can't think of every possibility for
directories where the qt
stuff might be. Okay, I could use the lib-path pkg-config returns. But I
don't know wether pkg-config finds qt if its installed in that place, without
modification of the PKG_CONFIG_PATH variable...
Ok, I have tried to set the PKG_CONFIG_PATH to
/opt/qt-4.3.2/lib/pkgconfig first, as below.
(and PATH stuff, too...)
qt-specific
stuff.
AttributeError: 'module' object has no attribute 'SourceFileScanner':
File "/tmp/package-scons/usr//lib/scons/SCons/Script/__init__.py",
line 1103:
None
<snip>
SCons.Tool.SourceFileScanner.add_scanner(
'.cpp',
SCons.Scanner.Scanner( uic_scanner, skeys=[".h"], recursive=1 ) )
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
This is interesting. Which version of scons and python are you using?
2:46 p.m.
Am Freitag, 29. Februar 2008 schrieb Salvatore Di Pietro:
I upgraded scons to 0.97 from 0.96.1 (Python is 2.4.3)
and it seems to
be better.
Okay. I should try to find a machine with 0.96.1 for testing of this stuff...
But still...
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
PKG_CONFIG_PATH=/opt/qt-4.3.2/lib/pkgconfig:/usr/lib/pkgconfig:/opt/kde/lib
/pkgconfig:/usr/local/lib/pkgconfig:/opt/kde/lib/pkgconfig
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
PATH=/opt/qt-4.3.2/bin:/usr/local/bin:/usr/bin:/sbin:/bin:/usr/X11R6/bin:/u
sr/games:/opt/www/htdig/bin:/opt/kde/bin:/usr/share/texmf/bin:.:/opt/kde/bin
:/opt/java/bin:/opt/java/jre/bin:/opt/netbeans/bin:/opt/schily/bin:/home/sal
vuz/Programmi/scripts salvuz@slack11-sal:~/tmp/jackmix-0.4.1$ scons
scons: Reading SConscript files ...
Configuring qt4muc...
Checking if the output of 'moc -v' contains 'Qt 4.' (cached) yes
Checking if the output of 'uic -v' contains '4.' (cached) yes
Checking if the output of 'rcc -v' contains '4.' (cached) yes
Done. Will define a more or less automatic environment to do all the
qt-specific stuff.
Checking for C header file stdio.h... yes
Checking for C++ header file iostream... yes
Checking for pkg-config (at least version 0.0.0)... yes
Checking for lash-1.0 (0.5.1 or higher)... yes
Checking for QtXml (4.2 or higher)... no
Checking for QtCore (4.2 or higher)... no
Checking for jack (0.100.0 or higher)... yes
Checking for QtGui (4.2 or higher)... no
(At least) One of the dependencies is missing. I can't go on without it...
salvuz@slack11-sal:~/tmp/jackmix-0.4.1$
are we closer?
Yep. But pkg-config can't find the .pc-files of qt. Are you using bash? If
yes, the commands to set the variables are "export variable=value" instead of
the above "variable=value". Unless you do "variable=value command"...
Btw: Is that qt-install from the package system or did you compile it
yourself? If you compiled it yourself, its most times wiser to install to
your homedir and set the PKG_CONFIG, LD_LIBRARY_PATH and PATH to the needed
values in your .profile or .bashrc. This has the advantage the the variables
don't have to be adopted to new installed packages. And you can do the
install as user without needing root-rights. And once you get used to this,
you can also install apps on systems where you are not the admin. :-) If the
admin doesn't forbid executables on the home-partition...
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your
administrator to do so...
5924
days inactive
5925
days old
linux-audio-user@lists.linuxaudio.org
8 comments
5 participants
participants (5)
-
Arnold Krille -
Hermann Meyer -
Miguel -
Salvatore Di Pietro -
schoappied