James said:
For headphones I decided to get some Audio-Technica
ATHM30
If you haven't bought the headphones yet you might want to pop
for the ATH-M40fs. Many users think they are better than the
Sennheiser HD280.
I was puzzling how to connect the mono output from the
preamp
to the stereo line-in on the sound card. In the end I bought a
dual mono 1/4" to stereo 1/8" jack lead. This seems most
sensible to me, though I was wondering if a straight stereo-stereo
would have worked??
You could just plug a mono 1/8" jack into the stereo line-in.
The mike will be on the left channel (tip) and the jack shaft will
ground the normal right channel (ring) input. By using the dual
mono to stereo, the right channel line-in is connected to an
"antenna" that could cause some noise (but it probably shouldn't
be a problem).
________________________________________________________________________
FREE Reminder Service - NEW from
AmericanGreetings.com
Click HERE and never forget a Birthday or Anniversary again!
http://track.juno.com/s/lc?s=197335&u=http://www.americangreetings.com/…