29 Apr
2005
29 Apr
'05
4:17 p.m.
Hi, I've been trying to get my two sound cards to work: an integrated
SiS (S17012), and a SoundBlasterLive (EMU 10K1). Both were detected fine
by alsaconf. But I am only able to get the SoundBlaster to play though
XMMS, XMMS says it's at hw:1,0, where the SiS is at hw:0,0. there is
also antoher entry in the XMMS ALSA configuration that says
"Sound Blaster Live!: EMU 10k1 FX8010 (hw:1,3)"
Have no idea why that is there..
Also, GNOME has aprantly switched over to using OSS, (I can see this in
the volume controlls) how can I change this to alsa?
Any help would be apperciated! :)
-- Mads
29 Apr
29 Apr
4:43 p.m.
New subject: [linux-audio-user] Re: Getting two sound cards to work in Debian sarge
Am 2005-04-29 20:13:58, schrieb Mads Munch Hansen:
Hi, I've been trying to get my two sound cards to
work: an integrated
SiS (S17012), and a SoundBlasterLive (EMU 10K1). Both were detected fine
^^^^^^^^^^^^
by alsaconf. But I am only able to get the
SoundBlaster to play though
XMMS, XMMS says it's at hw:1,0, where the SiS is at hw:0,0. there is
also antoher entry in the XMMS ALSA configuration that says
Have no idea why that is there..
This stupid SiS Soundchip is missing a mixer and some other stuff.
You need software mixer and volume.
Any help would be apperciated! :)
-- Mads
Bisous
Michelle
--
Linux-User #280138 with the Linux Counter, http://counter.li.org/
Michelle Konzack Apt. 917 ICQ #294147850
50, rue de Soultz MSM MichelleAC
0033/3/88452356 67100 Strasbourg/France IRC #Marrakech (irc.icq.com)
6:44 p.m.
New subject: [linux-audio-user] Getting two sound cards to work
I have a different 2 card problem. hw:1 is my main card. I'd like
to duplicate the output of hw:1 and send it to the output of hw:0.
Mandrake 10.1, ALSA 1.0.6 here.
Thanks....
--
Kevin
8:50 p.m.
New subject: [linux-audio-user] Getting two sound cards to work
I have a different 2 card problem. hw:1 is my main
card.
I'd like to duplicate the output of hw:1 and send it to
the output of hw:0. Mandrake 10.1, ALSA 1.0.6 here.
there's an ALSA plugin which can do so - unfortunately I
forgot the name. I remember DMIX and DSNOOP - there's a third
one which can do what you need.
Best regards
ce
9:38 p.m.
New subject: [linux-audio-user] Getting two sound cards to work
On Sat, 2005-04-30 at 00:51 +0200, Christoph Eckert wrote:
That only works if the cards are synced via word clock.
You can't send the same audio to 2 different cards, because they will
consume data at different rates, resulting in periodic xruns.
Lee
I have a
different 2 card problem. hw:1 is my main card.
I'd like to duplicate the output of hw:1 and send it to
the output of hw:0. Mandrake 10.1, ALSA 1.0.6 here.
there's an ALSA plugin which can do so - unfortunately I
forgot the name. I remember DMIX and DSNOOP - there's a third
one which can do what you need. 
24 May
24 May
6:54 p.m.
New subject: [linux-audio-user] Getting two sound cards to work
On Fri, Apr 29, 2005 at 07:38:32PM -0400, Lee Revell wrote:
On Sat, 2005-04-30 at 00:51 +0200, Christoph Eckert
wrote:
That only works if the cards are synced via word clock.
You can't send the same audio to 2 different cards, because they will
consume data at different rates, resulting in periodic xruns.
its possible with the alsa client from the udpsyncsource patch....
it resamples to the correct rate in realtime.
handling two different soundcards should work very good.
the jitter which is imposed by a wlan network is audible though.
I have a
different 2 card problem. hw:1 is my main card.
I'd like to duplicate the output of hw:1 and send it to
the output of hw:0. Mandrake 10.1, ALSA 1.0.6 here.
there's an ALSA plugin which can do so - unfortunately I
forgot the name. I remember DMIX and DSNOOP - there's a third
one which can do what you need.
Lee
--
torben Hohn
http://galan.sourceforge.net -- The graphical Audio language
6911
days inactive
6936
days old
linux-audio-user@lists.linuxaudio.org
5 comments
6 participants
participants (6)
-
Christoph Eckert -
Kevin Cosgrove -
Lee Revell -
Mads Munch Hansen -
Michelle Konzack -
torbenh＠gmx.de