18 Nov
2007
18 Nov
'07
5:55 a.m.
Whenever my system tries to insert the snd-intel8x0 module, it fails
with this error reported by dmesg:
snd_intel8x0: Unknown parameter `vid'
Where could that parameter be coming from?
Using Debian, I've checked /etc/modules, /etc/modprobe.d and every other
place I can think of. Any clues?
We will ignore for now the fact that I'm doing all these via Fluxbox
because KDE decided it can't find kdeinit after I did my usual weekly
system update ... grrr.
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
18 Nov
18 Nov
7:05 a.m.
On Sat, 2007-11-17 at 23:55 -1000, david wrote:
Whenever my system tries to insert the snd-intel8x0
module, it fails
with this error reported by dmesg:
snd_intel8x0: Unknown parameter `vid'
Where could that parameter be coming from?
Using Debian, I've checked /etc/modules, /etc/modprobe.d and every other
place I can think of. Any clues?
"vid" is short for Vendor ID and is a module option that is used with
the snd-usb-audio module together with "pid" (Product ID) and "index"
to
make USB audio devices with certain pids/vids use a fixed card slot.
Maybe you have edited your /etc/modprobe.d/alsabase and added a vid= in
the wrong place?
--ll
6:50 p.m.
Lars Luthman wrote:
On Sat, 2007-11-17 at 23:55 -1000, david wrote:
I checked, didn't have it there either. Didn't have it in modules,
either, but I did have just a plain snd-intel8x0 entry there. So I
remmed out all the entries in modules and restarted, it went away. Then
I added snd-intel8x0 back to modules and it started working again.
Leaves me free to fight with KDE again. aren't computers fun?
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
Whenever my system tries to insert the
snd-intel8x0 module, it fails
with this error reported by dmesg:
snd_intel8x0: Unknown parameter `vid'
Where could that parameter be coming from?
Using Debian, I've checked /etc/modules, /etc/modprobe.d and every other
place I can think of. Any clues?
"vid" is short for Vendor ID and is a module option that is used with
the snd-usb-audio module together with "pid" (Product ID) and "index"
to
make USB audio devices with certain pids/vids use a fixed card slot.
Maybe you have edited your /etc/modprobe.d/alsabase and added a vid= in
the wrong place?
6265
days inactive
6265
days old
linux-audio-user@lists.linuxaudio.org
2 comments
2 participants
participants (2)
-
david -
Lars Luthman