3 May
2016
3 May
'16
4:12 p.m.
Hi!
Sorry for my dumpness, but I need vlc to connect to the output-ports 9
and 10 of my RME HDSP via jack. I tried:
vlc --jack-connect-regex system:playback_9 track01.mp3
which works perfectly, but mono. (Both outputs of the mp3-file are
routed to playback_9.)
But I need a stereo connection to playback_9 and playback_10 and I just
don't know how to express that with regex... :(
Greets!
Mitsch
5 May
5 May
10:36 a.m.
Am Dienstag, den 03.05.2016, 16:12 +0200 schrieb Michael Jarosch:
don't know how to express that with regex... :(
Still don't know the regex-stuff, but I know how to workaround that:
Loaded a stereo equalizer to carla and connected the EQs output to the
correct sink of my HDSP. Started up vlc with this line:
vlc --jack-connect-regex EQ1Q
Now, vlc only connects to the stereo EQ.
Don't know: If someone already implements such a feature, why not just
making it possible to set f.e. a comma-seperated value of "allowed"
jack sinks?
Greets!
Mitsch
12:06 p.m.
On 05/03/2016 04:12 PM, Michael Jarosch wrote:
Hi!
Sorry for my dumpness, but I need vlc to connect to the output-ports 9
and 10 of my RME HDSP via jack. I tried:
vlc --jack-connect-regex system:playback_9 track01.mp3
which works perfectly, but mono. (Both outputs of the mp3-file are
routed to playback_9.)
But I need a stereo connection to playback_9 and playback_10 and I just
don't know how to express that with regex... :(
Did you try:
vlc --jack-connect-regex "system:playback_(9|10)" track01.mp3
Jeremy
3177
days inactive
3179
days old
linux-audio-user@lists.linuxaudio.org
3 comments
2 participants
participants (2)
-
Jeremy Jongepier -
Michael Jarosch