17 Jan
2007
17 Jan
'07
9:33 a.m.
Hi,
I just tried to open my projects under fc6 / ccrma as an experiment. I'm
using a stock kernel but I understand that this has rt capabilities. linux
sampler crashes as soon is I try to play a note (linuxsampler - 0.4.0,
qsampler 0.1.3). I tried to build from CVS but when I do it complains I
don't have libgig 3.1.0 - when I do and I have installed the latest version
of libgig via CVS aswell. Is anyone having and success with the latest ccrma
package ?
Cheers,
Bruce.
17 Jan
17 Jan
4:30 p.m.
On Wed, 2007-01-17 at 13:34 +0000, BJaY wrote:
Hi,
I just tried to open my projects under fc6 / ccrma as an experiment. I'm
using a stock kernel but I understand that this has rt capabilities.
Not a lot actually...
linux
sampler crashes as soon is I try to play a note (linuxsampler - 0.4.0,
qsampler 0.1.3). I tried to build from CVS but when I do it complains I
don't have libgig 3.1.0 - when I do and I have installed the latest version
of libgig via CVS aswell. Is anyone having and success with the latest ccrma
package ?
It is actually dying on my as well, sigh. For building stuff you need to
install the rpm -dev packages, for example "yum install libgig-dev".
Take particular care of _where_ you install things if you build from
source. Most source packages install using /usr/local as the default
prefix, while rpm packages are normally installed in /usr. So you could
end up with two different or similar versions of the same library and
other packages could end up confused about which to use.
-- Fernando
5:39 p.m.
On Wed, 2007-01-17 at 12:10 -0800, Fernando Lopez-Lezcano wrote:
On Wed, 2007-01-17 at 13:34 +0000, BJaY wrote:
linuxsampler itself just says:
---
gig::Synthesizer: Invalid Synthesis Mode: 40
---
and exits...
-- Fernando
Hi,
I just tried to open my projects under fc6 / ccrma as an experiment. I'm
using a stock kernel but I understand that this has rt capabilities.
Not a lot actually...
linux
sampler crashes as soon is I try to play a note (linuxsampler - 0.4.0,
qsampler 0.1.3). I tried to build from CVS but when I do it complains I
don't have libgig 3.1.0 - when I do and I have installed the latest version
of libgig via CVS aswell. Is anyone having and success with the latest ccrma
package ?
It is actually dying on my as well, sigh.
6:43 p.m.
On Wed, 2007-01-17 at 13:37 -0800, Fernando Lopez-Lezcano wrote:
On Wed, 2007-01-17 at 12:10 -0800, Fernando
Lopez-Lezcano wrote:
Looks like it has something to do with mmx/sse support, this may be a
side effect of build options. I'm investigating...
-- Fernando
On Wed, 2007-01-17 at 13:34 +0000, BJaY wrote:
linuxsampler itself just says:
---
gig::Synthesizer: Invalid Synthesis Mode: 40
---
and exits... Hi,
I just tried to open my projects under fc6 / ccrma as an experiment. I'm
using a stock kernel but I understand that this has rt capabilities.
Not a lot actually...
linux
sampler crashes as soon is I try to play a note (linuxsampler - 0.4.0,
qsampler 0.1.3). I tried to build from CVS but when I do it complains I
don't have libgig 3.1.0 - when I do and I have installed the latest version
of libgig via CVS aswell. Is anyone having and success with the latest ccrma
package ?
It is actually dying on my as well, sigh. 
6:47 p.m.
Le Wed, 17 Jan 2007 12:10:59 -0800,
Fernando Lopez-Lezcano <nando(a)ccrma.Stanford.EDU> a écrit :
On Wed, 2007-01-17 at 13:34 +0000, BJaY wrote:
> linux
> sampler crashes as soon is I try to play a note (linuxsampler -
> 0.4.0, qsampler 0.1.3).
It is actually dying on my as well, sigh.
I read your note, so I decided to give it a try. I already got linux
sampler but did not have qsampler, so I just got it using kyum. I
started qsampler, made the connection in jack, and loaded a
GrandPiano.gig that I got some time ago and played using an Axiom25
keyboard. Seems to be all OK, at least for a few minutes - did not try
longer.
linux sampler: 0.4.0-1.fc6.ccrma x86_64
qsampler: 0.1.3-3.fc6.ccrma x86_64
The only console output from qsampler is:
Warning: no locale found: /usr/share/locale/qsampler_fr_FR.UTF-8.qm
Al
7:22 p.m.
On Wed, 2007-01-17 at 17:53 -0500, lanas wrote:
Le Wed, 17 Jan 2007 12:10:59 -0800,
Fernando Lopez-Lezcano <nando(a)ccrma.Stanford.EDU> a écrit :
Probably the problem was not happening in x86_64, i386 definitely dies
with the 0.4.0-1 package.
The problem was that I was building with an old switch ("--disable-asm")
and that was actually _enabling_ asm support (go figure...), that led to
the wrong synthesis type being enabled (bit 0x20 being "on") and
linuxsampler quitting when it could not make sense of that.
New packages are available now, at least they do work on i386 (did not
try on x86_64 this time - no machine to test it on right now)...
-- Fernando
On Wed, 2007-01-17 at 13:34 +0000, BJaY wrote:
> linux
> sampler crashes as soon is I try to play a note (linuxsampler -
> 0.4.0, qsampler 0.1.3).
It is actually dying on my as well, sigh.
I read your note, so I decided to give it a try. I already got linux
sampler but did not have qsampler, so I just got it using kyum. I
started qsampler, made the connection in jack, and loaded a
GrandPiano.gig that I got some time ago and played using an Axiom25
keyboard. Seems to be all OK, at least for a few minutes - did not try
longer.
linux sampler: 0.4.0-1.fc6.ccrma x86_64
qsampler: 0.1.3-3.fc6.ccrma x86_64
7:41 p.m.
Seems to work OK now, I'll retry my projects on friday - thanks.
-----Original Message-----
From: linux-audio-user-bounces(a)music.columbia.edu
[mailto:linux-audio-user-bounces@music.columbia.edu]On Behalf Of
Fernando Lopez-Lezcano
Sent: 17 January 2007 23:23
To: A list for linux audio users
Cc: nando(a)ccrma.Stanford.EDU
Subject: Re: [linux-audio-user] linuxsampler CVS
On Wed, 2007-01-17 at 17:53 -0500, lanas wrote:
Le Wed, 17 Jan 2007 12:10:59 -0800,
Fernando Lopez-Lezcano <nando(a)ccrma.Stanford.EDU> a écrit :
Probably the problem was not happening in x86_64, i386 definitely dies
with the 0.4.0-1 package.
The problem was that I was building with an old switch ("--disable-asm")
and that was actually _enabling_ asm support (go figure...), that led to
the wrong synthesis type being enabled (bit 0x20 being "on") and
linuxsampler quitting when it could not make sense of that.
New packages are available now, at least they do work on i386 (did not
try on x86_64 this time - no machine to test it on right now)...
-- Fernando
On Wed, 2007-01-17 at 13:34 +0000, BJaY wrote:
> linux
> sampler crashes as soon is I try to play a note (linuxsampler -
> 0.4.0, qsampler 0.1.3).
It is actually dying on my as well, sigh.
I read your note, so I decided to give it a try. I already got linux
sampler but did not have qsampler, so I just got it using kyum. I
started qsampler, made the connection in jack, and loaded a
GrandPiano.gig that I got some time ago and played using an Axiom25
keyboard. Seems to be all OK, at least for a few minutes - did not try
longer.
linux sampler: 0.4.0-1.fc6.ccrma x86_64
qsampler: 0.1.3-3.fc6.ccrma x86_64
6514
days inactive
6514
days old
linux-audio-user@lists.linuxaudio.org
6 comments
3 participants
participants (3)
-
BJaY -
Fernando Lopez-Lezcano -
lanas