Does it show up correctly in Kmix or another mixer? You say the SB is hw:0 and it looks like you are trying to setup jack for hw:2... what does it detect as hw:1? Are you running a distro that has alsaconf available? Until recently I ran a Delta 44 in combination with my onboard soundchip and never had a problem with them playing together although it seems to me that jack found the '44 as hw:1. Motherboard had PCI slots go flaky so I can't verify that until I get a new board :( Best, Jon Hoskins Carotinho <carotinobg(a)yahoo.it> wrote: Hi all! I've just bough a Delta 44 but I can't run it. I've installed it properly, and the modules get loaded. But I'm scratching my head as I cannot get Jack to work with it. The message is loading driver .. apparent rate = 48000 creating alsa driver ... hw:2,0|hw:2,0|128|2|48000|4|4|nomon|swmeter|-|32bit control device hw:2 configuring for 48000Hz, period = 128 frames, buffer = 2 periods ALSA: final selected sample format for capture: 32bit little-endian ALSA: cannot set channel count to 4 for capture ALSA: cannot configure capture channel cannot load driver module alsa and I get errors with every channel count number, sample rates, etc. I've a SBLive installed, which takes hw:0. Did someone of you incurred in the same problem and found a solution? Thanks in advance! Carotinho Chiacchiera con i tuoi amici in tempo reale! http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com ----------------------------------------------------------------------- In a world without walls who needs gates or windows? --unknown --------------------------------- Any questions? Get answers on any topic at Yahoo! Answers. Try it now.

Alle 20:33, sabato 9 dicembre 2006, Rui Nuno Capela ha scritto: ^_^ ok this did the trick, just a bit counterintuitive:) I spent an hour last night to understand the meaning of the various channels that appears when running jack, and I almost did it. So, as far as concerning the writable ports, 1~8 are the PCM channels, and 9~10 is presumably the SPDIF, which is not actually present but shown by envy24control. On the other side, the first 4 capture lines come directly from the hw inputs, 11 ~ 12 seems to be the output of the digital mixer, but 5~10 are still unknown to me:) thanks you all:) Carotinho Chiacchiera con i tuoi amici in tempo reale! http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com