I have ALSA on a Linux system with a 2.6.5 kernel and a CS4236 sound card. I have written a VOX or Voice Actuated Relay recording program that receives audio from a radio such as a police scanner or amateur radio receiver and stores it in a file as unsigned 8-bit audio of the type you get if you cat /dev/dsp for samples that indicate audio being received and begins recording until there is a period of silence at which time it stops recording and continues to keep /dev/dsp open for more audio. It occurred to me that it should be possible to open either /dev/dsp or some other device for 2 8-K streams so that a similar program could read them both and store audio in files corresponding to the right and left channels of the card. Basically, I am not sure what is the best practice for opening the 16-bit, 8-K device. I think once that is solved, my program could be made to act as 2 independent VOX's. While doing a Google search, I found a OSS-sound document that is several years out of date and mentioned such devices as /dev/dspw which is a 16-bit version of /dev/dsp but modern Linux does not appear to have anything other than /dev/audio and /dev/dsp. Since this application needs to be portable, I want to set up the opening of the 16-bit 8-K channel in a standard way. Thanks for any pointers on documentation you might have. I have found the How-To document for Linux sound which mentions the standard /dev sound devices, but it is geared more toward helping folks get their Linux sound running rather than writing programs using the devices. Many thanks. Martin McCormick WB5AGZ Stillwater, OK Systems Engineer OSU Information Technology Department Network Operations Group