I don't use Ubuntu/Debian but I do use Linux-rt + nVidia, in all of my H/W.
So i thought i would clarify a point or two;
Found some suggestions about patching the nvidia
driver with some
custom> code here [1], but the driver they use there is quite old. And
last
time I had fiddled with nvidia driver it was the most
painful experience
ever..:)
Did you try the patch in my Github repository? You can download it with:
wgethttps://raw.github.com/AutoStatic/nvidia-rt/master/patch-3.0-rt-nvidia.…
This above patch only works for Nvidia driver < 325.xx ...
1. For Nvidia's newest drivers ~ you need my nvidia325xx-rt patch;
http://sourceforge.net/projects/l-proaudio/files/nvidia-325xx-rt.patch/down…
(for me, this patch works fine on 3.8-rt and 3.10-rt. haven't tested
anything older... I'm sure it's fine). When building the kernel module
(don't know where this is done in Debian/ubuntu) you must ignore the
PREEMPT_RT check in nvidia's installer, something like this;
" make IGNORE_PREEMPT_RT_PRESENCE=1
SYSSRC=/usr/lib/modules/"${_kernver}/build" module "
2. I've also made available a patch for 319.32, patched for kernel 3.10
support (which then can be patched with the old rt patch, above
"patch-3.0-rt-nvidia.patch"). - This is mainly for people who've
experienced regressions with the 325xx nvidia driver, Patch is here;
http://sourceforge.net/projects/l-proaudio/files/nVidia-319.32_lk310.patch/…
I've also started a thread @ nvidia's dev portal about nvidia-rt;
https://devtalk.nvidia.com/default/topic/572468/linux/nvidia-325-15-linux-r…
There aren't specific distro instructions, but a general "run down",
instead. I don't know how different distros package nvidia, so it's beyond
my own scope...and Since, i only use Archlinux, it is the only distro that
i personally am concerned with. + anyone can see how Archlinux handles
nvidia-rt by either reading through Arch's PKGBUILD in AUR;
https://aur.archlinux.org/packages/nv/nvidia-rt/PKGBUILD ... then find out
how to made your own distro apply what is needed.
cheerz
Jordan