I am trying to set up a netjack2 link from one computer to another. I have found a number of netjack related things in /usr/bin. There is jack_net_master and jack_net_slave... no man page for either and the help options ( -h) don't say much either. I have tried any combination of IP in both ends (4 in total) but it is always waiting for a connection. Ping works both ways. There is also jack_netsource... this one has a man page which suggests a setup like: On hostA: jackd -d alsa jack_netsource -H hostB -n1 -i4 -o4 -I0 -O0 On hostB: jackd -d net So having replaced the word hostB with thge IP of hostB still gets me no connection though the ports do show up in the connection dialog on the master side (hostA). (nothing on hostB) Google... gets me the idea of doing: pc master: jackd -d alsa jack_load netmanager slave: jackd -d net -C 2 -P 2 Listening on '225.3.19.154:19000' Is what I get.... ifconfig shows: eth0 Link encap:Ethernet HWaddr 00:11:95:5e:1a:4c inet addr:172.17.128.45 So I am not sure where the 225.3.19.154 comes from or how it is possible for the netmanager to be "listening" on that port. One of the pages points to: http://trac.jackaudio.org/wiki/WalkThrough/User/NetJack2 Which gives me errors... the main jack page says trac is down since December... so that is no help either. My setup is: hostA(audio IF I want to use)-----switch-----hostB | -------rest of LAN Right now I just want a connection. Then I can play with other settings. -- Len Ovens www.OvenWerks.net