18 Feb
2011
18 Feb
'11
1:43 p.m.
Minicomputer is launched by command "minicomputer", connected mix ports to card
and virtual keyboard (vmpk) to synth.
Now in gui: set mix and both aux volumes in amp to max, pan to middle, and (again) volume
of both oscillators (between their frames and filter frames, right?), and still don't
have sound.
18 Feb
18 Feb
2:22 p.m.
On 02/18/2011 01:43 PM, Mike Cookson wrote:
Minicomputer is launched by command
"minicomputer", connected mix ports to card and virtual keyboard (vmpk) to
synth.
Now in gui: set mix and both aux volumes in amp to max, pan to middle, and (again) volume
of both oscillators (between their frames and filter frames, right?), and still don't
have sound.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Did you try any of the presets?
And to get it going maybe this article might be useful:
http://www.linuxjournal.com/content/give-me-3-synths-part-2
And the manual if you'd like to dive in deeper:
http://minicomputer.sourceforge.net/minicomputerManual.pdf
Best,
Jeremy
5:24 p.m.
Fri, 18 Feb 2011 14:22:54 +0100 письмо от Jeremy Jongepier <jeremy(a)autostatic.com>om>:
On 02/18/2011 01:43 PM, Mike Cookson wrote:
If you are about "load sound" and
"load multy", they all are untitled.
Minicomputer is launched by command
"minicomputer", connected
mix ports to card and virtual keyboard (vmpk)
to synth.
Now in gui: set mix and both aux volumes in amp
to max, pan to middle,
and (again) volume of both oscillators (between their frames
and filter
frames, right?), and still don't have sound.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Did you try any of the presets? And to get it going maybe this article might be
useful:
http://www.linuxjournal.com/content/give-me-3-synths-part-2
And the manual if you'd like to dive in deeper:
http://minicomputer.sourceforge.net/minicomputerManual.pdf
I already looked manual.
I guess, actions, i made, should be enough. Btw, mt version is 1.41. Btw, now i saw
minicomputer midi port (before i saw only miniEditor port :D ), and also connected all
ports (aux, mix and separate voices) to card. But all these additional actions did not
make sence.
Best,
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
8:55 p.m.
I've been having major issues too. Part of what you have to do is copy the
preset txt files from minicomputer to your .minicomputer directory. Then
the present and multi buttons should do something.
Jeremy
2011/2/18 Mike Cookson <cook60020tmp(a)mail.ru>
Fri, 18 Feb 2011 14:22:54 +0100 письмо от Jeremy Jongepier <
jeremy(a)autostatic.com>gt;:
On 02/18/2011 01:43 PM, Mike Cookson wrote:
If you are about "load sound" and
"load multy", they all are untitled.
Minicomputer is launched by command
"minicomputer", connected
mix ports to card and virtual keyboard (vmpk)
to synth.
Now in gui: set mix and both aux volumes in amp
to max, pan to middle,
and (again) volume of both oscillators (between their frames
and filter
frames, right?), and still don't have sound.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Did you try any of the presets? And to get it going maybe this article might be
useful:
http://www.linuxjournal.com/content/give-me-3-synths-part-2
And the manual if you'd like to dive in deeper:
http://minicomputer.sourceforge.net/minicomputerManual.pdf
I already looked
manual. I guess, actions, i made, should be enough. Btw,
mt version is 1.41. Btw, now i saw minicomputer midi port (before i saw only
miniEditor port :D ), and also connected all ports (aux, mix and separate
voices) to card. But all these additional actions did not make sence.
Best,
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
9:43 p.m.
I've been having major issues too. Part of what
you have to do is copy the preset txt files from minicomputer to your .minicomputer
directory. Then the present and multi buttons should do something.
I replaced
files in ~/.miniComputer with factory, now i have some making sence presets. But still
don't have sound.
11:33 p.m.
Honestly, this is exactly what has been happening to me. I find that if I
keep twiddling all the controls and messing around with everything for ~5-10
minutes, it will eventually just start working, although it will still kind
of be broken, as the notes won't go off when I release. I think it might
just be that you have to wait a long time for it to work, as I can find no
pattern in what I mess with affecting how long it takes to start working.
Jeremy
On Fri, Feb 18, 2011 at 8:43 PM, Mike Cookson <cook60020tmp(a)mail.ru> wrote:
I've been
having major issues too. Part of what you have to do is copy
the preset txt files
from minicomputer to your .minicomputer
directory. Then the present and multi buttons
should do something.
I replaced files in ~/.miniComputer with factory, now i have
some making
sence presets. But still don't have sound.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
5223
days inactive
5223
days old
linux-audio-user@lists.linuxaudio.org
5 comments
3 participants
participants (3)
-
Jeremy Jongepier -
Jeremy Salwen -
Mike Cookson