12 Apr
2008
12 Apr
'08
5:53 p.m.
Hi,
I give up: Since I've become a father I've hardly ever found the time
to abuse 1 input channel, let alone the 26 of my hdsp 9652. So I've
decided to sell it, preferrably to a lau person.
Package is complete, nothing bad ever happened to the card, it works
like a charm, served us good when we were still a band.
Price: On ebay they tend to go for 250 to 300 Euros, depending on the
weather. So I figure 275 Euros should be a good deal. Fixed offer.
(btw: I just looked on thomann.de and their price hasn't moved in
years, it's still 499 Euros.)
If interested mail me privately and we'll work it out.
Wolfgang
12 Apr
12 Apr
6:07 p.m.
On 12 April 2008 at 21:53, Wolfgang Woehl <tito(a)rumford.de> wrote:
I give up: Since I've become a father I've
hardly ever found the time
to abuse 1 input channel, let alone the 26 of my hdsp 9652. So I've
decided to sell it, preferrably to a lau person.
Package is complete, nothing bad ever happened to the card, it works
like a charm, served us good when we were still a band.
Price: On ebay they tend to go for 250 to 300 Euros, depending on the
weather. So I figure 275 Euros should be a good deal. Fixed offer.
(btw: I just looked on thomann.de and their price hasn't moved in
years, it's still 499 Euros.)
Do you have a URL to spec's and photos of your unit?
Thanks...
--
Kevin
6:11 p.m.
I found it.
http://www.rme-audio.com/english/hdsp/hdsp9652.htm
What else does one need to use with this in order to be able to
record & playback? It looks like A/D and D/A stuff will be needed.
What do you use? Do you connect via the ADAT optical I/O?
Thanks...
--
Kevin
8:19 p.m.
Kevin Cosgrove:
http://www.rme-audio.com/english/hdsp/hdsp9652.htm
What else does one need to use with this in order to be able to
record & playback? It looks like A/D and D/A stuff will be needed.
What do you use? Do you connect via the ADAT optical I/O?
Hi Kevin, the hdsp 9652 is 3 x adat i/o plus 1 spdif so you need
external adat-capable gear. I had 2 behringer ada8000's which are
cheap (These have 8 preamps, balanced plugs, clock, 8 line-outs
that -- at least in these early behringer models -- inadvertently
inverted phase, chinese quality all in all) but ok for what I could
afford at the time.
In order to monitor your input you either route in hdspmixer (any to
any) back via adat into external into line-outs. Or you include
Ardour's mixer to set up monitor busses (which is a bit painful) for
loads of headphone mixes back to hdspmixer etc.
Actually if Ardour had some kind of mechanism to show you all sends
(think all mic routes of a band recording) to a bus (think headphone
mix busses) in one place ... With good latency setup this would be
wicked.
Wolfgang
9:44 p.m.
On Sat, Apr 12, 2008 at 3:19 PM, Wolfgang Woehl <tito(a)rumford.de> wrote:
Kevin Cosgrove:
I use an AI3 for inexpensive analog IO into one ADAT channel on my
HDSP 9652, and then a Benchmark DAC1 as my main converter going to my
monitors over the coax spdif output.
I have a second PC with an older Hammerfall 9636 which has two ADAT
channels. I use 4 optical cables between the two machine and can run 8
stereo soft synths outs without any mixing.
RME stuff is very stable and well built. Had this stuff for years and
it doesn't fail.
My one big gripe with the HDSP 9652 is the lack of support under
Linux. Wolfgang's card will be good for who ever buys it but do not
expect to use the latest RME drivers if you use dual boot since the
Linux HDSP driver requires older firmware. Also, the HDSP 9652 cannot
be used in a headless, non-GUI Linux box as there is no way to
initialize the mixer without manually running hdspmixer. Under Windows
the mixer is all set up automatically.
Hope this helps,
Mark
http://www.rme-audio.com/english/hdsp/hdsp9652.htm
What else does one need to use with this in order to be able to
record & playback? It looks like A/D and D/A stuff will be needed.
What do you use? Do you connect via the ADAT optical I/O?
Hi Kevin, the hdsp 9652 is 3 x adat i/o plus 1 spdif so you need
external adat-capable gear. I had 2 behringer ada8000's which are
cheap (These have 8 preamps, balanced plugs, clock, 8 line-outs
that -- at least in these early behringer models -- inadvertently
inverted phase, chinese quality all in all) but ok for what I could
afford at the time.
10:13 p.m.
Hi,
* Mark Knecht <markknecht(a)gmail.com> [2008-04-13 01:44]:
I have a second PC with an older Hammerfall 9636 which
has two ADAT
channels. I use 4 optical cables between the two machine and can run 8
stereo soft synths outs without any mixing.
Perhaps i'm wrong, but i think the 9636 is the same card as the 9652 but
without the additional 3rd ADAT output on a separate card.
regards, PP
10:22 p.m.
On Sat, Apr 12, 2008 at 5:13 PM, Peter Plessas <plessas(a)mur.at> wrote:
Hi,
* Mark Knecht <markknecht(a)gmail.com> [2008-04-13 01:44]:
No the Hammerfall 9652/36 series is the older, less expensive version
that doesn't have the onboard mixer. The HDSP 9652/36 is the newer
design the Wolfgang is selling.
They are both great card families.
- Mark
I have a second PC with an older Hammerfall 9636
which has two ADAT
channels. I use 4 optical cables between the two machine and can run 8
stereo soft synths outs without any mixing.
Perhaps i'm wrong, but i think the 9636 is the same card as the 9652 but
without the additional 3rd ADAT output on a separate card.
regards, PP
11:24 p.m.
To add more confusion, and try to clear it up...
The Hammerfall series (Non-HDSP) does not have the DSP mixer. I believe it
came in 9632 and 9652 flavors.
The Hammerfall HDSP series comes in both HDSP 9632 and 9656 series, has an
onboard DSP mixer for low latency monitoring. They are both very good cards
for Linux audio IMO. I have the HDSP 9632 myself, and enjoyed it till my
workstation died. Currently all my work is done on my MacBook Pro
unfortuanatly.
The difference between the 9632 and 9656 I believe comes down to two things,
less overall I/O on the 9636, but it contains some analog I/O in its base
version the 9652 does not if memory serves.
Seablade
On Sat, Apr 12, 2008 at 8:22 PM, Mark Knecht <markknecht(a)gmail.com> wrote:
On Sat, Apr 12, 2008 at 5:13 PM, Peter Plessas
<plessas(a)mur.at> wrote:
but
Hi,
* Mark Knecht <markknecht(a)gmail.com> [2008-04-13 01:44]:
> I have a second PC with an older Hammerfall 9636 which has two ADAT
> channels. I use 4 optical cables between the two machine and can run
8
stereo
soft synths outs without any mixing.
Perhaps i'm wrong, but i think the 9636 is the same card as the 9652 without the additional 3rd ADAT output on a
separate card.
regards, PP
No the Hammerfall 9652/36 series is the older, less expensive version
that doesn't have the onboard mixer. The HDSP 9652/36 is the newer
design the Wolfgang is selling.
They are both great card families.
- Mark
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
6:12 p.m.
Wolfgang Woehl wrote:
Hi,
I give up: Since I've become a father I've hardly ever found the time
to abuse 1 input channel, let alone the 26 of my hdsp 9652. So I've
decided to sell it, preferrably to a lau person.
Package is complete, nothing bad ever happened to the card, it works
like a charm, served us good when we were still a band.
Price: On ebay they tend to go for 250 to 300 Euros, depending on the
weather. So I figure 275 Euros should be a good deal. Fixed offer.
(btw: I just looked on thomann.de and their price hasn't moved in
years, it's still 499 Euros.)
If interested mail me privately and we'll work it out.
Wolfgang
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Never give up making music... especially not if you're becoming a father!!!
Blessings father ;)
Dirk
6:28 p.m.
On Sat, Apr 12, 2008 at 10:12:38PM +0200, schoappied wrote:
Wolfgang Woehl wrote:
I'll second that. Never stop making music.
Teach your children well, and feed them on your dreams.
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Lascia la spina, cogli la rosa.
I give up: Since I've become a father
I've hardly ever found the time
to abuse 1 input channel, let alone the 26 of my hdsp 9652. So I've
decided to sell it, preferrably to a lau person.
Never give up making music... especially not if you're becoming a father!!!
7:53 p.m.
Fons Adriaensen:
I'm giving up on that multichannel ueberbeast hdsp, allright? Not on
making music :) The little darling and I already had kind of a
freewheeling session. She couldn't grok it completely, she's 13
months, but she was laughing all the time.
Wolfgang
On Sat, Apr 12, 2008 at 10:12:38PM +0200, schoappied
wrote:
Never give up
making music... especially not if you're becoming a
father!!!
I'll second that. Never stop making music.
Teach your children well, and feed them on your dreams.
8:10 p.m.
On Sat, Apr 12, 2008 at 11:53:47PM +0200, Wolfgang Woehl wrote:
I'm giving up on that multichannel ueberbeast
hdsp, allright? Not on
making music :) The little darling and I already had kind of a
freewheeling session. She couldn't grok it completely, she's 13
months, but she was laughing all the time.
There are probably few experiences that are as beneficial
to a child as being exposed to _making_ music at an early
age...
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Lascia la spina, cogli la rosa.
6071
days inactive
6071
days old
linux-audio-user@lists.linuxaudio.org
11 comments
7 participants
participants (7)
-
Fons Adriaensen -
Kevin Cosgrove -
Mark Knecht -
plessas＠mur.at -
schoappied -
Thomas Vecchione -
Wolfgang Woehl