2013/8/18 Clemens Ladisch <clemens(a)ladisch.de>
Carlos sanchiavedraz wrote:
The MIDI port on my UA25EX just shows up when
audio card is in advanced
driver mode
In Windows, the advanced mode is intended to be used with the Roland
drivers; disabling it should be necessary only when you're using it with
a system where these drivers are not installed. Due to bugs in the
built-in Windows USB MIDI driver, MIDI is made available only in
advanced mode.
In theory, Linux should support advanced mode.
It is supported; the problem is that for the moment Jack doesn't start in
this mode. There are some issues in RPi related to Jack, using USB 1 or USB
2 and the advance mode.
which by now
is not the main mode I'm playing because of problems with
this mode on Raspberry PI (for the moment It runs with jack1 and it
won't start in advanced mode).
Which kernel are you using? To other programs (i.e., aplay/arecord)
work?
Kernel is Raspberry 's, it seems Linux 3.6.11:
https://github.com/raspberrypi/linux
I suppose that with Jack2 this won't be a
problem
If this is a driver problem, Jack2 will not work either.
Regards,
Clemens
Yes, you're right, is not about the driver. I meant what I mentioned before
about Jack problems with RPi.
Thanks, Clemens.
--
Carlos sanchiavedraz
* Musix GNU+Linux
http://www.musix.es