Hello, recently I rewrote QMidiRoute completely and obtained a utility that is useful not only for keyboard splitting: ftp://ftp.suse.com/pub/people/mana/qmidiroute-0.2.0.tar.bz2 QMidiRoute is a filter/router for MIDI events. Possible types include Note On/Off, Controller, Pitchbend, Program Change. Events are mapped in one or several maps. Each map has an input and an output section. The input section determines the set of events which should be processed by the respective map. The output section specifies the modifications that are applied to the input event before it is passed to the output port. If an input event matches several maps, each map will send an output event. The tab "Unmatched" specifies what happens with events that do not match any map. They can be either discarded (the default) or sent to a selectable output port. Map settings can be saved/retrieved. There is also a cmdline option for loading to allow easy use of QMidiRoute e.g. in scripts. QMidiRoute also includes an event log window for note, controller, pitchbend and program change events. Feedback is appreciated. Maybe you can think of further use cases which require an extension of QMidiRoute... Have a lot of fun ! Matthias -- Dr. Matthias Nagorni SuSE Linux AG Maxfeldstr. 5 phone: +49 911 74053375 D - 90409 Nuernberg fax : +49 911 74053483

Hi, Joey Reid wrote: You now will be able to stand on your own feets forever and you will never have to wait for those linux audio developer guys to write the apps you need. ;) Ciao -- Frank

On Wed, 28 Jul 2004, Russell Hanaghan wrote: A simple make -f make_qmidiroute should work. To install the binary just copy it into /usr/bin. In case of problems, check the locations of the libraries at the beginning of make_qmidiroute. Matthias -- Dr. Matthias Nagorni SuSE Linux AG Maxfeldstr. 5 phone: +49 911 74053375 D - 90409 Nuernberg fax : +49 911 74053483

On Thu, 29 Jul 2004, Russell Hanaghan wrote: Not directly. Prog change can be mapped to CC data, but for one selectable but fixed controller. In principle you could use a chain PGM --> Note --> CC however the problem is that no NOTEOFF is created when a PGM is left, so Notes/CC are not toggled but all switched on. Depending on the conrete case, it might be possible to just define a second map that will take care of switching things off. May I guess ? Are you planning to use PGM as sustain or so ? ;-) Please describe your concrete case. I will then think about a way to integrate it in the current model. Matthias -- Dr. Matthias Nagorni SuSE Linux AG Maxfeldstr. 5 phone: +49 911 74053375 D - 90409 Nuernberg fax : +49 911 74053483

On Thu, 2004-07-29 at 09:50, Matthias Nagorni wrote: Hmmm...My very OWN software designer?? :) I have an old Digitech RP10 guitar pedal with limited midi capabilities. I use it on my elctric axes but use the midi functions to control my Ardour mixer for the live fx stuff. Right now, the volume pedal is CC10 and it's tied to the slider widget on my Acoustic guit. channel. But he 5 "bank" foot pedal buttons only send Prog. change. I actually set one to "1" and the second to "127" in the pedal. I tie Pedal 1 to the "master" volume widget in Ardour. Then the Master toggles from Value=1 to value=127. Not proper use but thats just how Ardour interprets Prog. Change. Trouble is, the physical pedals are not separable this way. I cannot assign a different pedal to a different slider widget in Ardour. I figure if I can convert the data to CC values it may seperate them and I will have more fallibility with what hardware I already have. Hope this makes sense. Thanks Matthias R~