22 Aug
2010
22 Aug
'10
9:47 a.m.
Hi,
Guys who use software (e.g. samples or pianoteq) to play electric piano
| keyboard. How do you have your setup? Do you have a special amp for
the electric piano or do you just play it via your monitors? What gives
a better sound? If you have it via a special amp how do you connect it
to your computer?
Regards,
\r
22 Aug
22 Aug
9:59 a.m.
Excerpts from rosea grammostola's message of 2010-08-22 11:47:54 +0200:
Hi,
Guys who use software (e.g. samples or pianoteq) to play electric piano
| keyboard. How do you have your setup? Do you have a special amp for
the electric piano or do you just play it via your monitors? What gives
a better sound? If you have it via a special amp how do you connect it
to your computer?
Regards,
\r
I do have an e-piano with speakers, so if I'm lazy, I just use it as-is.
Otherwise my setup is via usb cable (no midi ports) -> alsa midi ->
LinuxSampler -> non-mixer -> jconvolver -> non-mixer -> monitors &
recording software.
Hard to say what sounds better. I have issues with the e-pianos analogue
out (only headphone out, and apparently my stereo plug doesn't fit
properly + noisy anyway).
The piano through its speakers sounds fine, and so does LS and the likes
through the monitors.
--
Philipp
--
"Wir stehen selbst enttäuscht und sehn betroffen / Den Vorhang zu
und alle Fragen offen." Bertolt Brecht, Der gute Mensch von Sezuan
10:32 a.m.
On 08/22/2010 11:47 AM, rosea grammostola wrote:
Hi,
Guys who use software (e.g. samples or pianoteq) to play electric piano
| keyboard. How do you have your setup? Do you have a special amp for
the electric piano or do you just play it via your monitors? What gives
a better sound? If you have it via a special amp how do you connect it
to your computer?
Regards,
\r
Hello,
No special setup, I use either my headphones or my monitor speakers.
Just like Philipp I use LinuxSampler, he uses Non-Mixer though, I use
Qtractor as a mixing console.
Best,
Jeremy
23 Aug
23 Aug
12:36 p.m.
I use a good sound card with RCA outs, a ground-loop filter, and an
RCA-->1/4" converter, and play through a 1962 Epiphone vacuum-tube
amplifier usually. I had never heard a piano cry, before doing this. I
also sometimes record direct to hard drive, and play direct through
house PA.
J.E.B.
Hi,
Guys who use software (e.g. samples or pianoteq) to play electric piano
| keyboard. How do you have your setup? Do you have a special amp for
the electric piano or do you just play it via your monitors? What gives
a better sound? If you have it via a special amp how do you connect it
to your computer?
Regards,
\r
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
2:10 p.m.
On 08/23/2010 02:36 PM, Jonathan E. Brickman wrote:
I use a good sound card with RCA outs, a ground-loop
filter, and an
RCA-->1/4" converter, and play through a 1962 Epiphone vacuum-tube
amplifier usually.
Should be able with a m-audio audiophile too. Hmm I would
think the
sound would be better with a decent keyboard app vs. studio monitors...
\r
I had never heard a piano cry, before doing this. I
also sometimes record direct to hard drive, and play direct through
house PA.
J.E.B.
Hi,
Guys who use software (e.g. samples or pianoteq) to play electric piano
| keyboard. How do you have your setup? Do you have a special amp for
the electric piano or do you just play it via your monitors? What gives
a better sound? If you have it via a special amp how do you connect it
to your computer?
Regards,
\r
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
2:25 p.m.
On 08/23/2010 04:09 PM, rosea grammostola wrote:
On 08/23/2010 02:36 PM, Jonathan E. Brickman wrote:
If you don't use an amp, the question is whether the sound is better
using 'normal' speakers or special studio monitors (for mixing and
mastering).
\r
I use a good sound card with RCA outs, a
ground-loop filter, and an
RCA-->1/4" converter, and play through a 1962 Epiphone vacuum-tube
amplifier usually.
Should be able with a m-audio audiophile too. Hmm I would think the
sound would be better with a decent keyboard app vs. studio monitors...
2:40 p.m.
On Mon, Aug 23, 2010 at 3:25 PM, rosea grammostola <
rosea.grammostola(a)gmail.com> wrote:
If you don't use an amp, the question is whether
the sound is better
using 'normal' speakers or special studio monitors (for mixing and
mastering).
Its only going to sound as good as your samples. So long as your not using
total junk speakers,
I'd really worry more about your PianoTeq setup, or your .gig files for
QSampler.
Admittedly a home sound system will colour the sound differently than
monitors. But if its just
for playing live, get a sound you like and enjoy it. :-)
Cheers, -Harry
5001
days inactive
5002
days old
linux-audio-user@lists.linuxaudio.org
6 comments
5 participants
participants (5)
-
Harry Van Haaren -
Jeremy Jongepier -
Jonathan E. Brickman -
Philipp Überbacher -
rosea grammostola