15 Jan
2003
15 Jan
'03
7:36 p.m.
Hello,
I've been trying to compile tapiir (0.6) but I'm getting the following error
during configure:
checking for numericsort in -lfltk... no
configure: error: missing fltk
but I _do_ have fltk installed. I tried with fltk1.1.1 and 1.1.2.
Trying to run the binary version I get a message that libfltk.so.1 is missing so I checked
and linked libfltk.so.1.1 to libfltk.so.1
Then, the app starts segfaults.
gdb reports this:
Starting program: /home/mis/downloads/tapiir-0.6/debian/tapiir/bin/tapiir
[New Thread 1024 (LWP 16620)]
[New Thread 2049 (LWP 16621)]
[New Thread 1026 (LWP 16622)]
Scheduler set to Round Robin with priority 99...
Playback device is hw:0,0
Capture device is hw:0,0
Parameters are 48000Hz, S16_LE, 2 channels, non-blocking mode
Wanted tick time: 1us, poll mode: yes
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1026 (LWP 16622)]
0x4021461f in malloc () from /lib/libc.so.6
All this on debian woody/testing with alsa 0.9 (cvs post rc3), kernel 2.4.18 with lowlat.
any ideas appreciated
./MiS
--
Michal Seta
CreaZone http://www.creazone.com
No One Receiving http://www.noonereceiving.32k.org
NOR - "The Release of the Wandering-Eyed Girl" now shipping!
http://www.grainofsound.com
16 Jan
16 Jan
7:18 a.m.
You need to find a copy of fltk 1.0.x
The API will be different.
- Steve
On Wed, Jan 15, 2003 at 06:27:28 -0500, Michal Seta wrote:
Hello,
I've been trying to compile tapiir (0.6) but I'm getting the following error
during configure:
checking for numericsort in -lfltk... no
configure: error: missing fltk
but I _do_ have fltk installed. I tried with fltk1.1.1 and 1.1.2.
Trying to run the binary version I get a message that libfltk.so.1 is missing so I
checked and linked libfltk.so.1.1 to libfltk.so.1
Then, the app starts segfaults.
gdb reports this:
Starting program: /home/mis/downloads/tapiir-0.6/debian/tapiir/bin/tapiir
[New Thread 1024 (LWP 16620)]
[New Thread 2049 (LWP 16621)]
[New Thread 1026 (LWP 16622)]
Scheduler set to Round Robin with priority 99...
Playback device is hw:0,0
Capture device is hw:0,0
Parameters are 48000Hz, S16_LE, 2 channels, non-blocking mode
Wanted tick time: 1us, poll mode: yes
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1026 (LWP 16622)]
0x4021461f in malloc () from /lib/libc.so.6
All this on debian woody/testing with alsa 0.9 (cvs post rc3), kernel 2.4.18 with
lowlat.
any ideas appreciated
./MiS
--
Michal Seta
CreaZone http://www.creazone.com
No One Receiving http://www.noonereceiving.32k.org
NOR - "The Release of the Wandering-Eyed Girl" now shipping!
http://www.grainofsound.com
7:10 p.m.
On Fri, Jan 17, 2003 at 10:50:39 -0500, Michal Seta wrote:
On Thu, 16 Jan 2003 11:12:24 +0000
Steve Harris <S.W.Harris(a)ecs.soton.ac.uk> wrote:
Depending on the makefiles and stuff you might be bale to build tapii
staticly. or you could port it to a modern fltk and do us all a favour :)
- Steve
You need to find a copy of fltk 1.0.x
Thanks that worked. Had to fiddle a bit with all the fltk mess to get the ssm working
too :) I know it's a bad thing...
8:41 p.m.
On Fri, 17 Jan 2003 23:04:01 +0000
Steve Harris <S.W.Harris(a)ecs.soton.ac.uk> wrote:
or you could port it to a modern fltk and do us all a
favour :)
I wish, oh, how I wish... If I could I would even jackify it.
... but I'm _just_ a musician.
./MiS
--
Michal Seta
CreaZone http://www.creazone.com
No One Receiving http://www.noonereceiving.32k.org
NOR - "The Release of the Wandering-Eyed Girl" now shipping!
http://www.grainofsound.com
11:35 p.m.
Michal Seta wrote:
Me too, but...
Change this line in the tapir-1.6 configure.in:
AC_CHECK_LIB(fltk,numericsort,,AC_MSG_ERROR("missing fltk"))
to this:
AC_CHECK_LIB(fltk,fl_numericsort,,AC_MSG_ERROR("missing fltk"))
Then run autoconf to generate a new configure file.
Now add this line to src/Mixer.cxx (might not be necessary, I'm
compiling under GCC 2.96) :
#include "math.h"
Now you should be able to compile Tapiir against FLTK 1.1.2 and ALSA
0.9.0rc6.
I've built it but not tested it. I'm not maintaining Tapiir so someone
else can jackify it.
Best regards,
== Dave Phillips
The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm
The Linux Soundapps Site at http://linux-sound.org
or you could
port it to a modern fltk and do us all a favour :)
I wish, oh, how I wish... If I could I would even jackify it.
... but I'm _just_ a musician.
18 Jan
18 Jan
12:33 a.m.
On Fri, 17 Jan 2003 22:30:15 -0500
Dave Phillips <dlphilp(a)bright.net> wrote:
Change this line in the tapir-1.6 configure.in:
Thank you!
that did it for me!
But the latest version of tapiir I could find was 0.6. I presume a typo?
./MiS
--
Michal Seta
CreaZone http://www.creazone.com
No One Receiving http://www.noonereceiving.32k.org
NOR - "The Release of the Wandering-Eyed Girl" now shipping!
http://www.grainofsound.com
12:57 a.m.
Michal Seta wrote:
But the latest version of tapiir I could find was 0.6.
I presume a typo?
Oops, sorry about that...
Best regards,
== Dave Phillips
The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm
The Linux Soundapps Site at http://linux-sound.org
7973
days inactive
7975
days old
linux-audio-user@lists.linuxaudio.org
7 comments
3 participants
participants (3)
-
Dave Phillips -
Michal Seta -
Steve Harris