31 Aug
2005
31 Aug
'05
10:36 a.m.
Greetings:
I've switched my laptop back to Planet C's RH9 and its 2.4.26 kernel.
The machine is much happier now.
However, a problem has come up that did not exist on a former
identical installation: My PDAudioCF card is not recognized when I 'cat
/proc/asound/cards'. lsmod shows this report:
[dlphilp@localhost dlphilp]$ lsmod |grep pdaudio
snd-pdaudiocf 10980 0 (unused)
snd-ak4117 7196 0 [snd-pdaudiocf]
snd-pcm 85952 0 [snd-pcm-oss snd-pdaudiocf snd-ak4117
snd-usb-audio snd-cs4231-lib]
snd 48708 0 [snd-pcm-oss snd-mixer-oss
snd-seq-dummy snd-seq-oss snd-seq-midi snd-opl3-synth snd-seq-instr
snd-pdaudiocf snd-ak4117 snd-usb-audio snd-virmidi snd-seq-virmidi
snd-seq-midi-event snd-seq snd-cs4232 snd-opl3-lib snd-hwdep
snd-mpu401-uart snd-rawmidi snd-seq-device snd-cs4231-lib snd-pcm snd-timer]
ds 8776 2 [snd-pdaudiocf serial_cs pcnet_cs]
pcmcia_core 57504 0 [snd-pdaudiocf serial_cs pcnet_cs ds
yenta_socket]
But catting proc shows only:
[dlphilp@localhost dlphilp]$ cat /proc/asound/cards
0 [CS4231 ]: CS4231 - CS4231
CS4231 at 0x534, irq 5, dma 1&0
1 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
2 [M2x2 ]: USB-Audio - Midisport 2x2
Midiman Midisport 2x2 at usb-00:07.2-1.2, full speed
I added these lines to /etc/modules.conf :
alias snd-card-3 snd-pdaudiocf
alias sound-slot-3 snd-pdaudiocf
I also tried manually loading snd-pdaudiocf, it seemed to work all
right and reported no error. Nevertheless, no PDAudioCF card appears in
/proc/asound. The card's little blue light is on, indicating that the
card is recognized by the PCMCIA system, but something else is wrong
somewhere. Any suggestions ?
Best,
dp
31 Aug
31 Aug
11:08 a.m.
On Wed, 2005-08-31 at 08:38 -0400, Dave Phillips wrote:
Greetings:
I've switched my laptop back to Planet C's RH9 and its 2.4.26 kernel.
The machine is much happier now.
However, a problem has come up that did not exist on a former
identical installation: My PDAudioCF card is not recognized when I 'cat
/proc/asound/cards'. lsmod shows this report:
what does lspci say?
11:26 a.m.
Hi Paul:
Paul Davis wrote:
On Wed, 2005-08-31 at 08:38 -0400, Dave Phillips wrote:
[dlphilp@localhost dlphilp]$ lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)
00:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
01:00.0 VGA compatible controller: Neomagic Corporation NM2200
[MagicGraph 256AV] (rev 20)
01:00.1 Multimedia audio controller: Neomagic Corporation NM2200
[MagicMedia 256AV Audio] (rev 20)
And this from 'lspci -v' :
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 0007
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 0007
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
The NM256 also sits on IRQ 10. Maybe an interrupt sharing problem ?
01:00.1 Multimedia audio controller: Neomagic Corporation NM2200
[MagicMedia 256AV Audio] (rev 20)
Subsystem: Hewlett-Packard Company MagicMedia 256AV Audio Device
on Voyager II
Flags: fast Back2Back, medium devsel, IRQ 10
Memory at fe000000 (32-bit, prefetchable) [size=4M]
Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <available only to root>
However, a problem has come up that did not
exist on a former
identical installation: My PDAudioCF card is not recognized when I 'cat
/proc/asound/cards'. lsmod shows this report:
what does lspci say?
11:42 a.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dave Phillips wrote:
Capabilities: <available only to root>
Hi Dave,
hmmm - realtime-lsm is installed I guess? And you are member of the
audio group?
cheers,
wjl aka Wolfgang Lonien
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDFbO1qrjTanKNm9ARAn3JAKCZdwy/T+VXIg9Vs+Dctk7aEsZQ1QCeK0cu
vXAGGLA+a/0Gc1ahPGLl0Ss=
=E65M
-----END PGP SIGNATURE-----
12:01 p.m.
Wolfgang Lonien wrote:
Dave Phillips wrote:
Kernel is Planet CCRMA's 2.4.26-ll, which I believe does not have
capabilities enabled. Corrections welcome. :)
All other devices work fine, including audio from the machine's CS4232
(==NM256). Permissions are all correct through the /dev/snd tree.
Best,
dp
Capabilities: <available only to
root>
Hi Dave,
hmmm - realtime-lsm is installed I guess? And you are member of the
audio group?
11:25 a.m.
Hi Dave. Can't say I know anything about using pcmcia, but I just wondered if
you had the option lines set in /etc/modules.conf , and whether this may have
something to do with it.
options card_ID index=0
options card_ID index=1
options card_ID index=2
options snd-pdaudiocf index=3
obviously with the first 3's card ID's changed for your first 3 cards.
I say this because before I had the options set, my usb midi keyboard was
being detected first and registered in /proc/asound/cards , and the actual
soundcard wasn't there. All the best. Nigel.
J
On Wednesday 31 Aug 2005 1:38 pm, Dave Phillips wrote:
Greetings:
I've switched my laptop back to Planet C's RH9 and its 2.4.26 kernel.
The machine is much happier now.
However, a problem has come up that did not exist on a former
identical installation: My PDAudioCF card is not recognized when I 'cat
/proc/asound/cards'. lsmod shows this report:
[dlphilp@localhost dlphilp]$ lsmod |grep pdaudio
snd-pdaudiocf 10980 0 (unused)
snd-ak4117 7196 0 [snd-pdaudiocf]
snd-pcm 85952 0 [snd-pcm-oss snd-pdaudiocf snd-ak4117
snd-usb-audio snd-cs4231-lib]
snd 48708 0 [snd-pcm-oss snd-mixer-oss
snd-seq-dummy snd-seq-oss snd-seq-midi snd-opl3-synth snd-seq-instr
snd-pdaudiocf snd-ak4117 snd-usb-audio snd-virmidi snd-seq-virmidi
snd-seq-midi-event snd-seq snd-cs4232 snd-opl3-lib snd-hwdep
snd-mpu401-uart snd-rawmidi snd-seq-device snd-cs4231-lib snd-pcm
snd-timer] ds 8776 2 [snd-pdaudiocf serial_cs
pcnet_cs] pcmcia_core 57504 0 [snd-pdaudiocf serial_cs
pcnet_cs ds yenta_socket]
But catting proc shows only:
[dlphilp@localhost dlphilp]$ cat /proc/asound/cards
0 [CS4231 ]: CS4231 - CS4231
CS4231 at 0x534, irq 5, dma 1&0
1 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
2 [M2x2 ]: USB-Audio - Midisport 2x2
Midiman Midisport 2x2 at usb-00:07.2-1.2, full speed
I added these lines to /etc/modules.conf :
alias snd-card-3 snd-pdaudiocf
alias sound-slot-3 snd-pdaudiocf
I also tried manually loading snd-pdaudiocf, it seemed to work all
right and reported no error. Nevertheless, no PDAudioCF card appears in
/proc/asound. The card's little blue light is on, indicating that the
card is recognized by the PCMCIA system, but something else is wrong
somewhere. Any suggestions ?
Best,
dp
7435
days inactive
7435
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
Dave Phillips -
nigel henry -
Paul Davis -
Wolfgang Lonien