22 Aug
2012
22 Aug
'12
6:22 p.m.
Hello List,
I was thinking in control DSSI, LV2 and LADSPA plugins (using non-mixer)
through TouchOSC for Android [1]
TouchOSC for iOS has the option to customize the GUI and the OSC Paths but
that option is not available at the moment for android.
So I was thinking in some kind of application to route or forward OSC
messages, just customizing the OSC path, the host and UDP port, among
others things.
I found this option for Mac [2] and this PD patch for linux [3] (can't get
this working), but I would like to know if you know an application to do
this or maybe some other recommendations to route/forward or even translate
OSC messages.
I know that maybe this could be done in PD or Python, but I don't want to
reinvent the wheel.
Thanks in advance for your help.
Diego
[1] http://hexler.net/software/touchosc
[2] http://www.osculator.net/
[3] https://code.autistici.org/trac/planetQ/wiki/robOSC
22 Aug
22 Aug
8:15 p.m.
On 08/22/2012 06:21 PM, Diego Simak wrote:
Hello List,
I was thinking in control DSSI, LV2 and LADSPA plugins (using non-mixer)
through TouchOSC for Android [1]
TouchOSC for iOS has the option to customize the GUI and the OSC Paths but
that option is not available at the moment for android.
So I was thinking in some kind of application to route or forward OSC
messages, just customizing the OSC path, the host and UDP port, among
others things.
I found this option for Mac [2] and this PD patch for linux [3] (can't get
this working), but I would like to know if you know an application to do
this or maybe some other recommendations to route/forward or even translate
OSC messages.
I know that maybe this could be done in PD or Python, but I don't want to
reinvent the wheel.
Thanks in advance for your help.
Diego
[1] http://hexler.net/software/touchosc
[2] http://www.osculator.net/
[3] https://code.autistici.org/trac/planetQ/wiki/robOSC
route or rewrite: should not be hard using Pd.
Simply forward - or duplicate OSC message to multiple hosts/ports, I use
http://gareus.org/_media/oss/osc/repeater_udp.c
which can forward any UDP datagram (OSC or whatever) to one or more
hosts/ports. -- compile with `gcc -o repeater_udp repeater_udp.c`
ciao,
robin
8:31 p.m.
2012/8/22 Robin Gareus <robin(a)gareus.org>
On 08/22/2012 06:21 PM, Diego Simak wrote:
Thank you very much Robin for this.
I will try to write an OSC path translator in Pd.
Thanks,
Diego
Hello List,
I was thinking in control DSSI, LV2 and LADSPA plugins (using non-mixer)
through TouchOSC for Android [1]
TouchOSC for iOS has the option to customize the GUI and the OSC Paths
but
that option is not available at the moment for
android.
So I was thinking in some kind of application to route or forward OSC
messages, just customizing the OSC path, the host and UDP port, among
others things.
I found this option for Mac [2] and this PD patch for linux [3] (can't
get
this working), but I would like to know if you
know an application to do
this or maybe some other recommendations to route/forward or even
translate
OSC messages.
I know that maybe this could be done in PD or Python, but I don't want to
reinvent the wheel.
Thanks in advance for your help.
Diego
[1] http://hexler.net/software/touchosc
[2] http://www.osculator.net/
[3] https://code.autistici.org/trac/planetQ/wiki/robOSC
route or rewrite: should not be hard using Pd.
Simply forward - or duplicate OSC message to multiple hosts/ports, I use
http://gareus.org/_media/oss/osc/repeater_udp.c
which can forward any UDP datagram (OSC or whatever) to one or more
hosts/ports. -- compile with `gcc -o repeater_udp repeater_udp.c`
ciao,
robin
23 Aug
23 Aug
6:11 a.m.
On Thu, Aug 23, 2012 at 3:31 AM, Diego Simak <diego.simak(a)gmail.com> wrote:
I will try to write an OSC path translator in Pd.
Thanks,
Diego
The mrpeach library in pd-extended will be your friend here. It
includes better objects for dealing with OSC than vanilla PD.
Also, you may want to consider using Control for Android rather than
touchOSC. Seems to be easier to customize layouts.
https://play.google.com/store/apps/details?id=com.charlieroberts.Control&am…
One more thing - I was wondering if you'd like to share some details
as I've been trying to achieve some of the same things. You said you
were using non-mixer to host plugins? Did you mean LV2 and DSSI as
well? I thought non-mixer only hosted ladspa. If that's the case, I'm
curious, how do you intended to get your OSC routed to LV2 or DSSI
plugins? Also, I haven't looked hard at all, but is the OSC interface
in non-mixer documented anywhere?
A final possibility is using falkTXs Carla plugin host which appears
to have a full OSC interface. Again, though, this doesn't seem to be
documented.
cheers
Michael
7:25 a.m.
2012/8/23 michael noble <looplog(a)gmail.com>
On Thu, Aug 23, 2012 at 3:31 AM, Diego Simak
<diego.simak(a)gmail.com>
wrote:
Hi!
I will try to write an OSC path translator in Pd.
Thanks,
Diego
The mrpeach library in pd-extended will be your friend
here. It
includes better objects for dealing with OSC than vanilla PD.
This is what I've started to look now using pdextended.
Also, you may want to consider using Control for
Android rather than
touchOSC. Seems to be easier to customize layouts.
https://play.google.com/store/apps/details?id=com.charlieroberts.Control&am…
Yes, I know it, seems to do what I need, i.e. layout customization but that
app runs quite slow in my android device, that's why I was trying touchOSC,
but yes, Control seems to do what I need.
One more thing - I was wondering if you'd like to
share some details
as I've been trying to achieve some of the same things. You said you
were using non-mixer to host plugins? Did you mean LV2 and DSSI as
well? I thought non-mixer only hosted ladspa.
Sorry If I confused you:
non-mixer just for LADSPA.
Ingen for LV2.
jack-dssi-host for DSSI
If that's the case, I'm
curious, how do you intended to get your OSC routed to
LV2 or DSSI
plugins?
I never used OSC to control LV2 under Ingen, that's something that I need
to test but according to what is expressed in the documentation [1] it is
possible.
For DSSI I was thinking to send direct OSC message to the host, using the
same message format used by the GUI to communicate with the host.
Preliminary tests using dssi-vst (loading a VST instrument) and nekobee were
satisfactory.
Also, I haven't looked hard at all, but is the OSC interface
in non-mixer documented anywhere?
http://non-mixer.tuxfamily.org/MANUAL.html
A final possibility is using falkTXs Carla plugin host which appears
to have a full OSC interface. Again, though, this doesn't seem to be
documented.
cheers
Michael
Thank you very much for all your recommendations, very appreciated.
Diego
[1] http://drobilla.net/software/ingen/
4897
days inactive
4898
days old
linux-audio-user@lists.linuxaudio.org
4 comments
3 participants
participants (3)
-
Diego Simak -
michael noble -
Robin Gareus