15 Sep
2014
15 Sep
'14
4:57 p.m.
Hello everyone.
Looking for a external sound card with good preamp to record.
Found the Sound Devices USBPRE 2 suits my need.
Browsing the web, the Sound Devices web site and this list, it seems to be supported for
UAC1 with no trouble but only with 48khz.
The message is now old :
http://linuxaudio.org/mailarchive/lau/2013/1/25/196179
Anyone can give some update about the UAC2 status with Alsa on this card ? Please.
ps: running a Gnu/Debian Stable.
Best.
15 Sep
15 Sep
5:50 p.m.
OvO OvO wrote:
Found the Sound Devices USBPRE 2 suits my need.
Browsing the web, the Sound Devices web site and this list, it seems to be supported for
UAC1 with no trouble but only with 48khz.
The message is now old :
http://linuxaudio.org/mailarchive/lau/2013/1/25/196179
Anyone can give some update about the UAC2 status with Alsa on this card ?
I'd guess that the firmware still thinks that Linux is Windows.
Regards,
Clemens
6:43 p.m.
----- Mail original -----
De: "Clemens Ladisch"
<clemens(a)ladisch.de>
À: linux-audio-user(a)lists.linuxaudio.org
Envoyé: Lundi 15 Septembre 2014 17:49:47
Objet: Re: [LAU] Sound Devices - USBPRE 2 - Status ?
OvO OvO wrote:
Hi all,
I am the author of the cited "old message".
I am OK with you Clemens but the ASIO driver enable higher sampling rates on the usbpre2.
It's perhaps possible to understand how the ASIO driver works and emulate this
behavior ?
I have sold my usbPre2 so I cannot continue test.
Olivier
Found the Sound Devices USBPRE 2 suits my need.
Browsing the web, the Sound Devices web site and this list, it
seems to be supported for UAC1 with no trouble but only with
48khz.
The message is now old :
http://linuxaudio.org/mailarchive/lau/2013/1/25/196179
Anyone can give some update about the UAC2 status with Alsa on this
card ?
I'd guess that the firmware still thinks that Linux is Windows.
16 Sep
16 Sep
9:55 a.m.
On 09/15/2014 04:54 PM, OvO OvO wrote:
Hello everyone.
Looking for a external sound card with good preamp to record.
Found the Sound Devices USBPRE 2 suits my need.
Browsing the web, the Sound Devices web site and this list, it seems to
be supported for UAC1 with no trouble but only with 48khz.
The message is now old :
http://linuxaudio.org/mailarchive/lau/2013/1/25/196179
Anyone can give some update about the UAC2 status with Alsa on this card
? Please.
The USBPre2 works fine with UAC2 on recent kernels.
With Fedora 19, kernel 3.14.17, I get these samplerates:
32000/44100/48000/88200/96000/192000
Excellent interface with good specs and ergonomics.
/ Hans
10:12 a.m.
On 09/16/2014 09:55 AM, Hans Wilmers wrote:
The USBPre2 works fine with UAC2 on recent kernels.
With Fedora 19, kernel 3.14.17, I get these samplerates:
32000/44100/48000/88200/96000/192000
I have to moderate that a bit:
I can set up all sample rates as above, but the effective sample rate as
shown by qjackctl is max. 48000.
No error message is shown in case the effective sample rate is not the
chosen one.
Any idea why this happens?
/ Hans
3:17 p.m.
On Tue, Sep 16, 2014 at 4:12 AM, Hans Wilmers <hanswil(a)notam02.no> wrote:
On 09/16/2014 09:55 AM, Hans Wilmers wrote:
JACK asks ALSA for the nearest sample rate available. It does not print
errors when they do not match.
The USBPre2 works fine with UAC2 on recent kernels.
With Fedora 19, kernel 3.14.17, I get these samplerates:
32000/44100/48000/88200/96000/192000
I have to moderate that a bit:
I can set up all sample rates as above, but the effective sample rate as
shown by qjackctl is max. 48000.
No error message is shown in case the effective sample rate is not the
chosen one.
3:29 p.m.
On 09/16/2014 03:17 PM, Paul Davis wrote:
On Tue, Sep 16, 2014 at 4:12 AM, Hans Wilmers <hanswil(a)notam02.no
<mailto:hanswil@notam02.no>> wrote:
On 09/16/2014 09:55 AM, Hans Wilmers wrote:
The USBPre2 works fine with UAC2 on recent kernels.
With Fedora 19, kernel 3.14.17, I get these samplerates:
32000/44100/48000/88200/96000/192000
I have to moderate that a bit:
I can set up all sample rates as above, but the effective sample
rate as shown by qjackctl is max. 48000.
No error message is shown in case the effective sample rate is not
the chosen one.
JACK asks ALSA for the nearest sample rate available. It does not print
errors when they do not match.
OK, I understand.
The max. samplerate we get through Alsa is 48000 then.
/ Hans
3722
days inactive
3723
days old
linux-audio-user@lists.linuxaudio.org
6 comments
5 participants
participants (5)
-
Clemens Ladisch -
Hans Wilmers -
OvO OvO -
Paul Davis -
shal＠free.fr