8 Jun
2012
8 Jun
'12
4:26 p.m.
Hi
I discovered that jack2 seems to run much better with renoise on my arch
laptop than jack(1). However I can't seem to open the ardour projects I
worked on with jack with jack2 installed. ardour2 simply hangs with the
following in a terminal (and qjackctl and jack are hanging, I can't even
kill jackd):
ack: JackGraphManager::RecalculateLatency port_index = 25
Jack: JackGraphManager::RecalculateLatency port_index = 26
Jack: JackGraphManager::RecalculateLatency port_index = 27
Jack: JackGraphManager::RecalculateLatency port_index = 28
Jack: JackGraphManager::RecalculateLatency port_index = 30
Jack: JackGraphManager::RecalculateLatency port_index = 31
Jack: JackGraphManager::RecalculateLatency port_index = 33
Jack: JackGraphManager::RecalculateLatency port_index = 34
Jack: JackGraphManager::RecalculateLatency port_index = 35
Jack: JackGraphManager::RecalculateLatency port_index = 37
Jack: JackGraphManager::RecalculateLatency port_index = 38
Jack: JackClient::PortRegister ref = 4 name = ardour:send 6/out 1 type =
32 bit float mono audio port_index = 39
Jack: JackClient::PortDisconnect src = 39
Jack: JackClient::ClientNotify ref = 4 name = ardour notify = 4
Jack: JackClient::kGraphOrderCallback
Jack: JackClient::ClientNotify ref = 4 name = ardour notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackGraphManager::RecalculateLatency port_index = 24
Jack: JackGraphManager::RecalculateLatency port_index = 29
Jack: JackGraphManager::RecalculateLatency port_index = 32
Jack: JackGraphManager::RecalculateLatency port_index = 36
NB: I can start ardour2 just fine with a new project...
I know there are many unknowns, but I'll be happy to supply any
requested sysinfo....
Thanks in advance for any input!
--
Atte
http://atte.dk http://modlys.dk
9 Jun
9 Jun
7:22 a.m.
On Fri, Jun 8, 2012 at 4:23 PM, Atte André Jensen wrote:
Hi
I discovered that jack2 seems to run much better with renoise on my arch
laptop than jack(1). However I can't seem to open the ardour projects I
worked on with jack with jack2 installed. ardour2 simply hangs with the
following in a terminal (and qjackctl and jack are hanging, I can't even
kill jackd):
Maybe recompile jack2 with -O0 (instead of -O2, the default from
/etc/makepkg.conf). Just a guess, but that cured similar hiccups over here.
There is an issue with g++ 4.7.0/jack2, it's currently being discussed
on Jack-Devel/LAU in the thread titled "jack2 turned verbose".
best,
d
9:22 p.m.
On 2012-06-09 07:22, David Adler wrote:
Maybe recompile jack2 with -O0 (instead of -O2, the
default from
/etc/makepkg.conf). Just a guess, but that cured similar hiccups over here.
There is an issue with g++ 4.7.0/jack2, it's currently being discussed
on Jack-Devel/LAU in the thread titled "jack2 turned verbose".
Building from aur fails with:
/usr/lib/gcc/i686-pc-linux-gnu/4.7.0/../../../libm.so: could not read
symbols: Invalid operation
collect2: error: ld returned 1 exit status
Waf: Leaving directory
`/tmp/yaourt-tmp-atte/aur-jack2-git/src/jack2-git-build/build'
Build failed
-> task in 'jack_midi_latency_test' failed (exit status 1):
{task 165000684: cprogram midi_latency_test.c.5.o ->
jack_midi_latency_test}
['/usr/bin/gcc', '-Wl,-O1,--sort-common,--as-needed,-z,relro',
'-Wl,-O1,--sort-common,--as-needed,-z,relro', '-lm', '-lstdc++',
'-lm',
'example-clients/midi_latency_test.c.5.o', '-o',
'/tmp/yaourt-tmp-atte/aur-jack2-git/src/jack2-git-build/build/example-clients/jack_midi_latency_test',
'-Wl,-Bstatic', '-Wl,-Bdynamic', '-Lcommon', '-ljack',
'-lpthread',
'-lcelt0', '-lrt', '-ldl']
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build jack2-git.
Or did you mean just download the source and build by hand?
--
Atte
http://atte.dk http://modlys.dk
10 Jun
10 Jun
12:22 a.m.
On Sat, Jun 09, 2012 at 09:20:05PM +0200, Atte André Jensen wrote:
/usr/lib/gcc/i686-pc-linux-gnu/4.7.0/../../../libm.so:
could not
read symbols: Invalid operation
I got exactly the same error a week ago, on an Arch system fully
updated just a few minutes before trying to build jack2 from AUR.
Ciao,
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
9:46 p.m.
On 2012-06-10 00:22, Fons Adriaensen wrote:
I got exactly the same error a week ago, on an Arch
system fully
updated just a few minutes before trying to build jack2 from AUR.
I'm not sure what I should make of this information...
--
Atte
http://atte.dk http://modlys.dk
10:04 p.m.
On Sun, Jun 10, 2012 at 09:43:51PM +0200, Atte André Jensen wrote:
On 2012-06-10 00:22, Fons Adriaensen wrote:
It confirms what you wrote - that the current (at that time)
AUR package doesn't compile, and that this is not the result
of any other package being out of date since the system was
fully updated just before trying to compile jack2.
Ciao,
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
I got exactly the same error a week ago, on an
Arch system fully
updated just a few minutes before trying to build jack2 from AUR.
I'm not sure what I should make of this information...
11:28 p.m.
On 2012-06-10 22:04, Fons Adriaensen wrote:
Ok.
--
Atte
http://atte.dk http://modlys.dk
I'm not
sure what I should make of this information...
It confirms what you wrote 
10:23 p.m.
On 06/09/2012 09:20 PM, Atte André Jensen wrote:
On 2012-06-09 07:22, David Adler wrote:
> Maybe recompile jack2 with -O0 (instead of -O2, the default from
> /etc/makepkg.conf). Just a guess, but that cured similar hiccups over
> here.
> There is an issue with g++ 4.7.0/jack2, it's currently being discussed
> on Jack-Devel/LAU in the thread titled "jack2 turned verbose".
Most of the discussion has moved to jack-devel. It was too technical and
OT for LAU.
Building from aur fails with:
/usr/lib/gcc/i686-pc-linux-gnu/4.7.0/../../../libm.so: could not read
symbols: Invalid operation
collect2: error: ld returned 1 exit status
Waf: Leaving directory
`/tmp/yaourt-tmp-atte/aur-jack2-git/src/jack2-git-build/build'
Build failed
-> task in 'jack_midi_latency_test' failed (exit status 1):
{task 165000684: cprogram midi_latency_test.c.5.o ->
jack_midi_latency_test}
['/usr/bin/gcc', '-Wl,-O1,--sort-common,--as-needed,-z,relro',
'-Wl,-O1,--sort-common,--as-needed,-z,relro', '-lm', '-lstdc++',
'-lm',
'example-clients/midi_latency_test.c.5.o', '-o',
'/tmp/yaourt-tmp-atte/aur-jack2-git/src/jack2-git-build/build/example-clients/jack_midi_latency_test',
'-Wl,-Bstatic', '-Wl,-Bdynamic', '-Lcommon', '-ljack',
'-lpthread',
'-lcelt0', '-lrt', '-ldl']
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build jack2-git.
You still use -O1 -- That won't work with gcc-4.7.0 and jack2 due to a
gcc-bug [most likely] (see jack-devel -
http://permalink.gmane.org/gmane.comp.audio.jackit/26057 ) -- use -O0 as
David suggested or better: gcc-4.6 that may also work-around the libm
issue, as well.
As for libm: Maybe one of the following can shed some light.
ls -l /usr/lib/gcc/i686-pc-linux-gnu/4.7.0/../../../libm.so
ls -l /usr/lib/libm.so
file /usr/lib/libm.so
It's also mentioned twice: '-lm', '-lstdc++', '-lm' but that
should not
make a difference.
ciao,
robin
11:28 p.m.
On 2012-06-10 22:23, Robin Gareus wrote:
You still use -O1 --
Ok, I know archers are not supposed to ask, but... Can you tell me how
to build from aur with -O0?
--
Atte
http://atte.dk http://modlys.dk
11:39 p.m.
On Sun, Jun 10, 2012 at 11:25 PM, Atte André Jensen wrote:
On 2012-06-10 22:23, Robin Gareus wrote:
You could temporarely change -O2 to -O0 in the CXXFLAGS line in
/etc/makepkg.conf.
best,
d
You still use -O1 --
Ok, I know archers are not supposed to ask, but... Can you tell me how to
build from aur with -O0?
9:44 p.m.
On 2012-06-09 07:22, David Adler wrote:
Maybe recompile jack2 with -O0 (instead of -O2, the
default from
/etc/makepkg.conf).
Since building from aur is not possible, how about building from source.
Should I just leave jack2 installed from pacman, and install it
alongside from source? Removing it with pacman will probably tear the
system apart:
atte@blokhus:~/software$ sudo pacman -R jack2
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: a2jmidid: requires jack
:: aubio: requires jack
:: blender: requires jack
:: din: requires jack
:: dssi: requires jack
:: dssi-vst: requires jack
:: fluidsynth: requires jack
:: gstreamer0.10-good-plugins: requires jack
:: lash: requires jack
:: lv2-ll-plugins: requires jack
:: mhwaveedit: requires jack
:: mplayer: requires jack
:: neil: requires jack
:: portaudio: requires jack
:: qjackctl: requires jack
:: rtaudio: requires jack
:: slv2: requires jack
:: sooperlooper: requires jack
:: traverso: requires jack
:: xjadeo: requires jack
:: yoshimi: requires jack
:: zita-at1: requires jack
--
Atte
http://atte.dk http://modlys.dk
11:34 p.m.
On Sun, Jun 10, 2012 at 9:41 PM, Atte André Jensen wrote:
On 2012-06-09 07:22, David Adler wrote:
I confirm Fons' observation regarding jack2 from AUR (git version), it gives
the same error.
However, compiling jack2 using the package sources from [community]
works. You can retrieve them either via the abs command[1] or manually[2].
Using those package sources together with the -O0 flag got me rid of jack's
undesired behaviour, It's just my guess that your issue might be related.
Don't install anything from source, unless by the usual makepkg/packman tools.
As long as you use provides=(jack`) and conflicts=('jack') in the PKGBUILD,
the locally built package will just replace the precompiled one, nothing needs
to be removed.
[1] https://wiki.archlinux.org/index.php/Arch_Build_System#Download_ABS_tree
[2] https://projects.archlinux.org/svntogit/community.git/tree/trunk?h=packages…
best,
d
best,
d
Maybe recompile jack2 with -O0 (instead of -O2,
the default from
/etc/makepkg.conf).
Since building from aur is not possible, how about building from source.
Should I just leave jack2 installed from pacman, and install it alongside
from source? Removing it with pacman will probably tear the system apart:
atte@blokhus:~/software$ sudo pacman -R jack2
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: a2jmidid: requires jack
:: aubio: requires jack
:: blender: requires jack
:: din: requires jack
:: dssi: requires jack
:: dssi-vst: requires jack
:: fluidsynth: requires jack
:: gstreamer0.10-good-plugins: requires jack
:: lash: requires jack
:: lv2-ll-plugins: requires jack
:: mhwaveedit: requires jack
:: mplayer: requires jack
:: neil: requires jack
:: portaudio: requires jack
:: qjackctl: requires jack
:: rtaudio: requires jack
:: slv2: requires jack
:: sooperlooper: requires jack
:: traverso: requires jack
:: xjadeo: requires jack
:: yoshimi: requires jack
:: zita-at1: requires jack
4552
days inactive
4554
days old
linux-audio-user@lists.linuxaudio.org
11 comments
4 participants
participants (4)
-
Atte André Jensen -
David Adler -
Fons Adriaensen -
Robin Gareus