New subject: M-Audio Delta 1010lt SPDIF Clock Source

16 Apr 2013

On Sun, April 14, 2013 10:55 am, Christoph Kuhr wrote:
...
  On 14.04.2013 17:30, Len Ovens wrote:
  That doesn't sound right... But, I don't
have the HW to test it out
 here.
 Is your s/pdif set to consumer or professional? If consumer, and
 copyrighted is selected and 1st generation is also selected. You should
 probably get no output.

 I would want to use the 1010 as the master clock to keep jitter of the
 other 8 port as low as possible. I would set spdif to professional in
 mudita24 and the 2496 to external clock. The 2496 should auto set to
 professional as well, though I don't know if the output will follow and
 I
 don't know the windows setup program at all either :)  so if you can set
 the windows side to professional as well do so.  I tried any compination of spdif
options. nothing worked so far. I
 thought maybe there is something to fix in the asoundrc... or someting 
mudita should have everything alsa gives.... mine doesn't seem to though.
Unless this is fixed in mudita 1.1 (I have 1.0.4)... I found that mudita
does not show the spdif output levels or give access to the spdif output
mixer faders. I can see them with the QAS utilities though. Using Qashctl
and the pcm->Multi track peak tab I can see the peak levels at the time
the application started... I can only refresh this by restarting the app
:P the refresh button doesn't work for this. Anyway, it does show levels
on the output to the spdif. (I used a mic into a spdif preamp at 48k into
the Delta66) I see a level out no matter what I am synced to. The delta
can be internal sync or external. So if there is not spdif output, it
happens after the ice1712.

Doesn't make sense, but have you tried both of them set to internal sync?
(just to see if anything gets through... might be some pops or clicks)

-- 
Len Ovens
www.OvenWerks.net

Re: [LAU] M-Audio Delta 1010lt SPDIF Clock Source