use aseqdump to create a trace of the incoming MIDI stream. post it here. On Sun, Sep 1, 2013 at 10:57 PM, Milan Lazecky <espiritocz(a)gmail.com>wrote;wrote:

some melody and.... another "Control these - or I have you guys, cheers! Are you sure you were playing the Sax correctly? If you breath too hard into a Sax it will also jump octaves and yours might have been a bit sensitive in how it wanted to render that to MIDI. All that Control Change stuff is streaming 'emphasis', most MIDI controllers do this including guitar controllers for pitch bend and polypressure keyboards for pressure events. If the MIDI Sax only mapped the fingering events then you might as well be playing a Hohner Melodica MIDI (I am going to get flamed for this comparison so let me I apologise in advance, the melodica is pretty cool, bless the ChiLites and New Order but it isn't a MIDI Sax....). The reed in your sax probably registers air pressure and sends those as control events to let your music be more expressive and there can be _lots_ of those events. If you record in some app and then drive a synth that maps those control events to pitch bend but don't do it too subtly then you might find the results to be unexpected. It shouldn't have affected how the music was scored since the note selection will have been done with literal NOTE_ON/OFF events from fingering but it might well affect how it was played back since you finger a note, mouth it, then the pressure events make the frequency go wild by jumping octaves the way a Sax does anyway if you breath too hard. If you get issues again then check out the synth you are driving and try and find out what it does with the controller ID in the message. Go a bit further and you will be able to do things like map the controller ID to the synth filter or cutoff and have a bit of fun with how you mouth your notes. Which is pretty comparable to what the ChiLites did with the Melodica - they sang into its mouthpiece and the result was something akin to a mechanical vocorder (and hopefully that little bit of respect will save me from being called a melodicist). Regards, nick. 2013/9/2 Paul Davis <paul(a)linuxaudiosystems.com> use aseqdump to create a trace of the incoming MIDI stream. post it here. On Sun, Sep 1, 2013 at 10:57 PM, Milan Lazecky <espiritocz(a)gmail.com>wrote;wrote: Hi, I am sorry for a beginner question, but your advice would be helpful.. I have an electronic saxophone, Yamaha WX5. I use with MIDI->USB, using Qsynth (through jack), the sound is working well, but every time I try to record midi footage, using either rosegarden or ardour3, the midi record is: - in strange tones (the melody is there, but notes are transposed for +32 or -32) (note that using Qsynth, or connecting with virtual keyboard, the notes are ok...) - when I try to transpose the recorded melody to normal scale, it doesn't play anything (yes, I map some midi instrument there, but it seems like if there is some strange volume=0 was set, or I don't know - but I haven't found a way to set it to other values) I know it is very messy question. But maybe you know what is wrong in my case.. maybe to try another software, or I miss some settings there? Thank you very much. Milan _______________________________________________ Linux-audio-user mailing list Linux-audio-user(a)lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user _______________________________________________ Linux-audio-user mailing list Linux-audio-user(a)lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user