10 Mar
2009
10 Mar
'09
7:30 p.m.
Hello all,
Jconv-0.8.0 is now available at the usual place
<http://www.kokkinizita.net/linuxaudio/downloads>
New in this release:
- New command line option -L <nsamples>, tries
to compensate for 'nsamples' of processing
latency.
- Jack ports can now be given meaningful names
and optionally be connected, by commands in the
config files.
- Some new reverb IRs available in a separate
package 'jconv-reverbs'. Includes ambisonic and
stereo IRs of the concert hall of La Casa della
Musica, and the former Santa Elisabetta church,
now La Casa del Suono, in Parma.
Enjoy !
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
10 Mar
10 Mar
7:44 p.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 1:28 AM, Fons Adriaensen <fons(a)kokkinizita.net>wrote;wrote:
Hello all,
Jconv-0.8.0 is now available at the usual place
<http://www.kokkinizita.net/linuxaudio/downloads>
New in this release:
- New command line option -L <nsamples>, tries
to compensate for 'nsamples' of processing
latency.
- Jack ports can now be given meaningful names
and optionally be connected, by commands in the
config files.
- Some new reverb IRs available in a separate
package 'jconv-reverbs'. Includes ambisonic and
stereo IRs of the concert hall of La Casa della
Musica, and the former Santa Elisabetta church,
now La Casa del Suono, in Parma.
Enjoy !
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
Fons, downloaded, but get the following make error:
make
g++ -O3 -Wall -MMD -MP -DVERSION=\"0.8.0\" -c -o jconv.o jconv.cc
In file included from jconv.cc:29:
jclient.h: In member function ‘void Jclient::start()’:
jclient.h:48: error: no matching function for call to
‘Convproc::start_process(int&, int&)’
/usr/include/zita-convolver.h:250: note: candidates are: int
Convproc::start_process(int)
make: *** [jconv.o] Error 1
What am i doing wrong here?
Alex.
--
Parchment Studios (It started as a joke...)
8:13 p.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 01:44:45AM +0300, alex stone wrote:
Fons, downloaded, but get the following make error:
make
g++ -O3 -Wall -MMD -MP -DVERSION=\"0.8.0\" -c -o jconv.o jconv.cc
In file included from jconv.cc:29:
jclient.h: In member function ‘void Jclient::start()’:
jclient.h:48: error: no matching function for call to
‘Convproc::start_process(int&, int&)’
/usr/include/zita-convolver.h:250: note: candidates are: int
Convproc::start_process(int)
make: *** [jconv.o] Error 1
What am i doing wrong here?
Nothing, I forgot you need an update of zita-convolver.
It's uploaded now.
Make sure to check the makefile for zita-convolver
and add the best optimisation flags for your CPU.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
8:24 p.m.
New subject: [LAD] New release of jconv
Fons Adriaensen wrote:
On Wed, Mar 11, 2009 at 01:44:45AM +0300, alex stone
wrote:
thanks, that one fixed the problem for me. there's a spurios "makeald"
in the Makefile that prevents the install target from working. i deleted
it without apparent ill effects.
best,
jörn
What am i doing wrong here?
Nothing, I forgot you need an update of zita-convolver.
It's uploaded now.
Make sure to check the makefile for zita-convolver
and add the best optimisation flags for your CPU.
8:26 p.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 2:24 AM, Jörn Nettingsmeier <
nettings(a)folkwang-hochschule.de> wrote:
Fons Adriaensen wrote:
Hehe Jorn, there's an echo in here.
I'll go hunting for the makeald, then.
Alex.
--
Parchment Studios (It started as a joke...)
On Wed, Mar 11, 2009 at 01:44:45AM +0300, alex
stone wrote:
thanks, that one fixed the problem for me. there's a spurios "makeald"
in the Makefile that prevents the install target from working. i deleted
it without apparent ill effects.
best,
jörn
What am i doing wrong here?
Nothing, I forgot you need an update of zita-convolver.
It's uploaded now.
Make sure to check the makefile for zita-convolver
and add the best optimisation flags for your CPU.
8:45 p.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 02:26:06AM +0300, alex stone wrote:
Hehe Jorn, there's an echo in here.
I'll go hunting for the makeald, then.
Just delete the makeald line in the install
target. I'll update the release...
(Seems like I'm trying to do too much in too little time)
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
8:35 p.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 2:24 AM, Jörn Nettingsmeier <
nettings(a)folkwang-hochschule.de> wrote:
Fons Adriaensen wrote:
All running and working.
Woohoo!
Alex.
--
Parchment Studios (It started as a joke...)
On Wed, Mar 11, 2009 at 01:44:45AM +0300, alex
stone wrote:
thanks, that one fixed the problem for me. there's a spurios "makeald"
in the Makefile that prevents the install target from working. i deleted
it without apparent ill effects.
best,
jörn
Nice call Jorn, that fixed it.
What am i doing wrong here?
Nothing, I forgot you need an update of zita-convolver.
It's uploaded now.
Make sure to check the makefile for zita-convolver
and add the best optimisation flags for your CPU.
8:45 p.m.
New subject: [LAD] New release of jconv
wow. thanks for the new example configurations and the extensive
comments! very helpful.
the convolver itself is a bit of a marketing disaster, though. i mean,
uh, it just convolves. No fancy new features, such as UltraLowJitter, or
at least TrueMultiplyAndAdd (for purists, as opposed to FFT-based, for
that extra dash of depth and clarity). And TubeMode would be cool as
well. but one cannot have it all, i assume. ;)
in the reverb configs, you mention that you cut off the direct sound by
setting an offset, which will then make the convolutions suitable to use
in a classic "aux send" setup, so that the reverb return will be 100% wet.
but why do you remove the first 5 ms of the room response?
i seem to recall it is about control of low frequency energy, but i
forgot the details. are those 5ms a natural constant, a matter of taste,
or maybe a function of the room's rt60? pointers to TFM would be R with
great interest.
best,
jörn
9:01 p.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 12:45:17AM +0100, Jörn Nettingsmeier wrote:
wow. thanks for the new example configurations and the
extensive
comments! very helpful.
I hope you like the AMB ones...
the convolver itself is a bit of a marketing disaster,
though. i mean,
uh, it just convolves. No fancy new features, such as UltraLowJitter, or
at least TrueMultiplyAndAdd (for purists, as opposed to FFT-based, for
that extra dash of depth and clarity). And TubeMode would be cool as
well. but one cannot have it all, i assume. ;)
:-) I'll take the IR of a long tube one if these days.
in the reverb configs, you mention that you cut off
the direct sound by
setting an offset, which will then make the convolutions suitable to use
in a classic "aux send" setup, so that the reverb return will be 100% wet.
but why do you remove the first 5 ms of the room response?
Because it's not room response but speaker response
(mainly LF, if the source was not well equalised),
or reflections from very close objects which are
not perceived as reflections but just add a nasty
colouration.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
11 Mar
11 Mar
6:07 a.m.
New subject: [LAD] New release of jconv
On Wed, Mar 11, 2009 at 2:59 AM, Fons Adriaensen <fons(a)kokkinizita.net>wrote;wrote:
On Wed, Mar 11, 2009 at 12:45:17AM +0100, Jörn
Nettingsmeier wrote:
Fons,
Thanks for the update. I was up early this morning testing it, and all goes
fine.
The new AMB configs are cool, and the more extensive user friendly comments
will certainly help.
Alex.
--
Parchment Studios (It started as a joke...)
wow. thanks for the new example configurations
and the extensive
comments! very helpful.
I hope you like the AMB ones...
the convolver itself is a bit of a marketing
disaster, though. i mean,
uh, it just convolves. No fancy new features, such as UltraLowJitter, or
at least TrueMultiplyAndAdd (for purists, as opposed to FFT-based, for
that extra dash of depth and clarity). And TubeMode would be cool as
well. but one cannot have it all, i assume. ;)
:-) I'll take the IR of a long tube one if these days.
in the reverb configs, you mention that you cut
off the direct sound by
setting an offset, which will then make the convolutions suitable to use
in a classic "aux send" setup, so that the reverb return will be 100%
wet.
but why do you remove the first 5 ms of the room
response?
Because it's not room response but speaker response
(mainly LF, if the source was not well equalised),
or reflections from very close objects which are
not perceived as reflections but just add a nasty
colouration.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
5:09 p.m.
Cannot install, get this:
$ sudo make install
make: *** No rule to make target `makeald', needed by `install'. Stop.
5:29 p.m.
On Wed, Mar 11, 2009 at 10:09:10PM +0200, David Baron wrote:
Cannot install, get this:
$ sudo make install
make: *** No rule to make target `makeald', needed by `install'. Stop.
Has been fixed. No need to download again, just
remove the final 'makeald' on the install: line
in the Makefile.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
18 Mar
18 Mar
7:29 a.m.
New subject: jconv - make error
Hello,
just trying install jconv and having this error for "make" here.
g++ -O3 -Wall -MMD -MP -DVERSION=\"0.8.0\" -c -o jconv.o jconv.cc
g++ -O3 -Wall -MMD -MP -DVERSION=\"0.8.0\" -c -o config.o config.cc
g++ -O3 -Wall -MMD -MP -DVERSION=\"0.8.0\" -c -o jconfig.o jconfig.cc
g++ -O3 -Wall -MMD -MP -DVERSION=\"0.8.0\" -c -o impdata.o impdata.cc
impdata.cc: In member function ‘int Impdata::sf_open_read(const char*)’:
impdata.cc:264: error: ‘SFC_WAVEX_GET_AMBISONIC’ was not declared in this scope
impdata.cc:264: error: ‘SF_AMBISONIC_B_FORMAT’ was not declared in this scope
impdata.cc: In member function ‘int Impdata::sf_open_write(const char*)’:
impdata.cc:306: error: ‘SFC_WAVEX_SET_AMBISONIC’ was not declared in this scope
impdata.cc:306: error: ‘SF_AMBISONIC_B_FORMAT’ was not declared in this scope
make: *** [impdata.o] Error 1
Thanks for any advice
mira
5731
days inactive
5739
days old
linux-audio-user@lists.linuxaudio.org
12 comments
5 participants
participants (5)
-
alex stone -
David Baron -
Fons Adriaensen -
Jaromír Mikeš -
Jörn Nettingsmeier