27 Sep
2016
27 Sep
'16
11:19 a.m.
Hi, I set up my laptop to initiate Calf Plugin (Fluidsynth) and Qjackctl
at login.
When I then login, I get no sound from various apps. The
preferences->Sound->test sound
also produces nothing. Running Totem, just hangs - no output and the
progress bar stays at 0.
I've now disabled Calf and Qjackctl at login and it all works again. Can
anyone explain
what is going on?
Output from aplay -l:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
(this is with it working, but it looked the same when not working)
Thanks,
Bill
--
+----------------------------------------+
| Bill Purvis |
| email: bill(a)billp.org |
+----------------------------------------+
27 Sep
27 Sep
12:22 p.m.
On Tue, 27 Sep 2016 10:19:11 +0100, Bill Purvis wrote:
Hi, I set up my laptop to initiate Calf Plugin
(Fluidsynth) and
Qjackctl at login.
When I then login, I get no sound from various apps.
[snip]
I've now disabled Calf and Qjackctl at login and it all works again.
Can anyone explain what is going on?
[snip]
Hi,
jackd does use the sound device, so without a workaround (a pulseaudio
or ALSA thingy) apps that don't use jackd, don't have access to the
sound device. Apps that could use jackd, must be connected to jackd,
they not necessarily do this automatically.
Regards,
Ralf
28 Sep
28 Sep
4:08 p.m.
Hello,
Le 27 septembre 2016 13:22:14 UTC+03:00, Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> a
écrit :
On Tue, 27 Sep 2016 10:19:11 +0100, Bill Purvis wrote:
I read in another mail that Bill uses KXStudio.
If so, just use Cadence to configure and launch jackd. And enable alsa and pulseaudio
bridging. This let alsa and pulse apps to work as expected.
Regards,
Thierry
--
Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
Hi, I set up my laptop to initiate Calf Plugin
(Fluidsynth) and
Qjackctl at login.
When I then login, I get no sound from various apps.
[snip]
I've now disabled Calf and Qjackctl at login and it all works again.
Can anyone explain what is going on?
[snip]
jackd does use the sound device, so without a workaround (a pulseaudio
or ALSA thingy) apps that don't use jackd, don't have access to the
sound device. Apps that could use jackd, must be connected to jackd,
they not necessarily do this automatically. 
3 Oct
3 Oct
11:50 a.m.
Hi Bill,
I guess you're running pulseaudio per default (or you desktop
environment - from your description, I'm guessing you're using gnome).
Running Qjack (jack) then exculsively grabs the audio device and
prevents pulseaudio from accessing the device directly.
Take a look at jack2-dbus and pulseaudio-jack (package names may vary
depending on your distro). In the end, you'll need to configure
pulseaudio to use jack as sink when this sink becomes available. On
archlinux, pulseaudio is already configured in a way that should create
a jack-sink when you run jack-dbus.
The pulseaudio module "module-switch-on-port-available" is helpful to
automate the switching part. You also need to tell qjackctl to utilize
jack-dbus (use jackstart as "Server prefix" and enable the "D-Bus"
interface in the "Misc" panel of qjackctl).
Good luck!
Mathias
On 09/27/2016 11:19 AM, Bill Purvis wrote:
Hi, I set up my laptop to initiate Calf Plugin
(Fluidsynth) and Qjackctl
at login.
When I then login, I get no sound from various apps. The
preferences->Sound->test sound
also produces nothing. Running Totem, just hangs - no output and the
progress bar stays at 0.
I've now disabled Calf and Qjackctl at login and it all works again. Can
anyone explain
what is going on?
Output from aplay -l:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
(this is with it working, but it looked the same when not working)
Thanks,
Bill
3164
days inactive
3170
days old
linux-audio-user@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Bill Purvis -
Mathias Buhr -
Ralf Mardorf -
Thierry Andriamirado