29 Jul
2003
29 Jul
'03
2:09 p.m.
Hello,
I tried to connect MAudio USB audio interface Sonica on my Compaq Laptop with
vector Linux. the light on Sonica is tunred ON meaning that it used
electricty from USB port, but I cannot hear any sound. DO you know how to
set up Sonica to work under Linux?
Thanks,
Vedran Vucic
29 Jul
29 Jul
3:12 p.m.
You need a firmware loader, which doesn't currently exist.
later,
Steve
On Tue, Jul 29, 2003 at 05:58:02PM +0200, Vedran Vucic wrote:
Hello,
I tried to connect MAudio USB audio interface Sonica on my Compaq Laptop with
vector Linux. the light on Sonica is tunred ON meaning that it used
electricty from USB port, but I cannot hear any sound. DO you know how to
set up Sonica to work under Linux?
Thanks,
Vedran Vucic
3:46 p.m.
OK, thanks.
Vedran
On Tuesday 29. July 2003. 18:55, you wrote:
You need a firmware loader, which doesn't
currently exist.
later,
Steve
On Tue, Jul 29, 2003 at 05:58:02PM +0200, Vedran Vucic wrote:
> Hello,
>
> I tried to connect MAudio USB audio interface Sonica on my Compaq Laptop
> with vector Linux. the light on Sonica is tunred ON meaning that it used
> electricty from USB port, but I cannot hear any sound. DO you know how
> to set up Sonica to work under Linux?
>
> Thanks,
>
> Vedran Vucic
7:19 a.m.
I will ask.
All the best,
Vedran Vucic
On Wednesday 30. July 2003. 10:04, you wrote:
> You need
a firmware loader, which doesn't currently exist.
Maybe you should ask M Audio if they plan to cooperate with the
community on Linux support for this particular device. Doesn't hurt
to ask...
Cheers
Daniel 
9:25 a.m.
Daniel James wrote:
This isn't needed in this case, the downloading protocol is already
known (it's DFU). The only problem is that somebody actually has to
write the loader.
HTH
Clemens
> You need
a firmware loader, which doesn't currently exist.
Maybe you should ask M Audio if they plan to cooperate with the
community on Linux support for this particular device. 
10:06 a.m.
Maybe you
should ask M Audio if they plan to cooperate with the
community on Linux support for this particular device.
This isn't needed in this case, the downloading protocol is already
known (it's DFU). The only problem is that somebody actually has to
write the loader.
10:30 a.m.
Yes, I contacted them and I will see what is their reply. However, I will
let you know.
All the best,
Vedran Vucic
On Wednesday 30. July 2003. 13:53, you wrote:
Do you mean that the firmware is already available, but currently
there's no way of getting it into the device under Linux?
I still think approaching M Audio is worth a try. If they know people
are actually buying their hardware to use specifically on Linux-based
systems then they might be inclined to work on a Linux/ALSA-friendly
firmware loader themselves, rather than just release specs for
someone else to write it.
I bought a Delta 1010 just because of the (third-party) Linux support
for the device, so there's a few dollars they can put into a firmware
loader straight away...
Cheers
Daniel
Maybe you should ask M Audio if they plan to cooperate
with the
community on Linux support for this particular device.
This isn't needed in this case, the downloading protocol is already
known (it's DFU). The only problem is that somebody actually has to
write the loader.
12:18 p.m.
On Wed, Jul 30, 2003 at 12:53:01PM +0100, Daniel James wrote:
You can grab the firmware from the Windows driver. In the 1220 driver package, it's
called 'ma005101.bin'. Run the installer, and you'll find the firmware in your
%TEMP% folder.
later,
Steve
This isn't
needed in this case, the downloading protocol is already
known (it's DFU). The only problem is that somebody actually has to
write the loader.
Do you mean that the firmware is already available, but
currently
there's no way of getting it into the device under Linux?
1:24 p.m.
Dear Steve,
Please try to be more specific. If I understood you properly I should install
driver for Sonica in Windows and have firmware in TEMP directory. What
should I do with it in order to get Sonica work in Linux.?
Thanks,
Vedran
On Wednesday 30. July 2003. 16:01, you wrote:
On Wed, Jul 30, 2003 at 12:53:01PM +0100, Daniel James
wrote:
You can grab the firmware from the Windows driver. In the 1220 driver
package, it's called 'ma005101.bin'. Run the installer, and you'll find
the
firmware in your %TEMP% folder.
later,
Steve
This
isn't needed in this case, the downloading protocol is already
known (it's DFU). The only problem is that somebody actually has to
write the loader.
Do you mean that the firmware is already available, but currently
there's no way of getting it into the device under Linux?
2:18 p.m.
On Wed, Jul 30, 2003 at 05:13:08PM +0200, Vedran Vucic wrote:
Please try to be more specific. If I understood you
properly I should install
driver for Sonica in Windows and have firmware in TEMP directory. What
should I do with it in order to get Sonica work in Linux.?
The Sonica wont work right now. The firmware loader doesn't exist, but the firmware is
available if one ever did. I killed my Sonica with an experimental DFU loader, so take
care if you're playing with this stuff. I don't think M-Audio will give out their
base firmware loader to 'recover' a busted unit. It cost me shipping and a whole
bunch of time and money for long distance phone calls to tech support to get mine back in
order. Wee!
later,
Steve
2:44 p.m.
I asked them and we will see what they will say.
All the best,
Vedran
On Wednesday 30. July 2003. 18:00, you wrote:
On Wed, Jul 30, 2003 at 05:13:08PM +0200, Vedran Vucic
wrote:
Please try to be more specific. If I understood
you properly I should
install driver for Sonica in Windows and have firmware in TEMP directory.
What should I do with it in order to get Sonica work in Linux.?
The Sonica wont work right now. The firmware loader doesn't exist, but the
firmware is available if one ever did. I killed my Sonica with an
experimental DFU loader, so take care if you're playing with this stuff. I
don't think M-Audio will give out their base firmware loader to 'recover' a
busted unit. It cost me shipping and a whole bunch of time and money for
long distance phone calls to tech support to get mine back in order. Wee!
later,
Steve
12:15 p.m.
On Wed, Jul 30, 2003 at 01:06:51PM +0200, Clemens Ladisch wrote:
This isn't needed in
this case, the downloading protocol is already
known (it's DFU). The only problem is that somebody actually has to
write the loader.
And the last time Clemens and I tried this, I had to RMA my Sonica. The DFU loader seemed
to have eaten the base firmware on the unit. The Sonica was detected as a
"unprogrammed" USB device (it's device IDs changed). Needless to say, the
M-Audio tech support was really baffled and tried to get me to re-install the Sonica
drivers a few dozen times. :P
later,
Steve
> You need a firmware loader, which doesn't
currently exist.
Maybe you should ask M Audio if they plan to cooperate with the
community on Linux support for this particular device.
7584
days inactive
7585
days old
linux-audio-user@lists.linuxaudio.org
12 comments
4 participants
participants (4)
-
Clemens Ladisch -
Daniel James -
Stephen Hassard -
Vedran Vucic