19 Jul
2007
19 Jul
'07
6:48 a.m.
Hi again,
QjackCtl 0.3.1a (unstable-qt4) crash-fix released!
This is an emergency crash-fix release and everyone is envited to ditch
yesterdays one.
The change-log just says it all:
- An immediate showstopper crash upon client start was irradicated,
which was affecting those with the system-tray icon disabled,
as is the default (thanks to Ken Ellinwood for first reporting
this sloppy one).
Again, the fix source tarball is made available from:
http://qjackctl.sourceforge.net
http://sourceforge.net/projects/qjackctl
Cheers && Enjoy,
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
19 Jul
19 Jul
3:41 p.m.
Hello Rui,
I built QjackCtl 0.3.1a in a UbuntuStudio system (running the Ubuntu RT
kernel) and launched it from the folder where it was built (I didn't install
it). It worked but when I start jack 50% to 65% of the CPU it's used
constantly. When I stop it the CPU use goes back down. This doesn't happen
with the previous version of QjackCtl.
Thanks!
Hector
On 7/19/07, Rui Nuno Capela <rncbc(a)rncbc.org> wrote:
Hi again,
QjackCtl 0.3.1a (unstable-qt4) crash-fix released!
This is an emergency crash-fix release and everyone is envited to ditch
yesterdays one.
The change-log just says it all:
- An immediate showstopper crash upon client start was irradicated,
which was affecting those with the system-tray icon disabled,
as is the default (thanks to Ken Ellinwood for first reporting
this sloppy one).
Again, the fix source tarball is made available from:
http://qjackctl.sourceforge.net
http://sourceforge.net/projects/qjackctl
Cheers && Enjoy,
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
--
===============================
http://www.hcenteno.net
4:57 p.m.
Hector Centeno wrote:
Hello Rui,
I built QjackCtl 0.3.1a in a UbuntuStudio system (running the Ubuntu RT
kernel) and launched it from the folder where it was built (I didn't
install it). It worked but when I start jack 50% to 65% of the CPU it's
used constantly. When I stop it the CPU use goes back down. This doesn't
happen with the previous version of QjackCtl.
Thanks!
Is this actual CPU load or is it DSP load as reported from jackd and
displayed on the main qjackctl display?
If it's CPU load that you're referring to, are you sure that is qjackctl
to blame? Or is jackd's? X? Anything else? What `top` is saying to you
at the top?
I'm not seeing nothing evident atm. that could lead to such a heavier
QjackCtl behavior, but it might be some combination of settings that I
suspect you'll have to switch one at a time, on a trial-and-error basis.
Is anybody else seeing this behavior? I can't see it on any of my
openSUSE 10.2 boxes (1 desktop, and 2 laptops) or even on WinXP :P
Tell me more about what you can find, if you have the patience of course.
Cheers.
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
8:45 p.m.
built here and works beautifully so far. no slow connects or crashes for me
anyway. Another fine piece of work Rui.
thank-you.
best
g.
20 Jul
20 Jul
8:57 a.m.
On Thu, July 19, 2007 23:44, Geoff Beasley wrote:
built here and works beautifully so far. no slow
connects or crashes for
me anyway. Another fine piece of work Rui.
Thanks Geoff.
I just hope that all QjackCtl 0.3 (unstable-qt4) issues get washed out, or
at least pin-pointed, before I go off on a couple-of-weeks vacation ;)
Cheers.
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
6429
days inactive
6430
days old
linux-audio-user@lists.linuxaudio.org
4 comments
3 participants
participants (3)
-
Geoff Beasley -
Hector Centeno -
Rui Nuno Capela