Hi Harry, it does build on Arch 64-bit, but there's no GUI if I run it by the script or with Qtractor as host. FWIW Sourcer does run with a GUI, but I didn't test if it really does work. The Fabla window is transparent. On Fri, 2013-07-19 at 17:40 +0100, Harry van Haaren wrote: [rocketmouse@archlinux openAV-Fabla]$ pacman -Q jalv ntk-git cairo cairomm libsndfile lv2-svn jalv 1.4.0-1 ntk-git 1:81f41f5-1 cairo 1.12.14-4 cairomm 1.10.0-3 libsndfile 1.0.25-2 lv2-svn 882-1 [rocketmouse@archlinux openAV-Fabla]$ ./run.sh Plugin: http://www.openavproductions.com/fabla UI: http://www.openavproductions.com/fabla/gui JACK Name: Fabla Block length: 256 frames MIDI buffers: 32768 bytes Comm buffers: 131072 bytes Update rate: 2 Hz volume = 0.750000 compressor_attack = 0.150000 compressor_decay = 0.300000 compressor_threshold = 0.500000 compressor_ratio = 0.500000 compressor_makeup = 0.500000 compressor_enable = 0.000000 pad_gain_1 = 0.500000 pad_gain_2 = 0.500000 pad_gain_3 = 0.500000 pad_gain_4 = 0.500000 pad_gain_5 = 0.500000 pad_gain_6 = 0.500000 pad_gain_7 = 0.500000 pad_gain_8 = 0.500000 pad_gain_9 = 0.500000 pad_gain_10 = 0.500000 pad_gain_11 = 0.500000 pad_gain_12 = 0.500000 pad_gain_13 = 0.500000 pad_gain_14 = 0.500000 pad_gain_15 = 0.500000 pad_gain_16 = 0.500000 pad_speed_1 = 0.500000 pad_speed_2 = 0.500000 pad_speed_3 = 0.500000 pad_speed_4 = 0.500000 pad_speed_5 = 0.500000 pad_speed_6 = 0.500000 pad_speed_7 = 0.500000 pad_speed_8 = 0.500000 pad_speed_9 = 0.500000 pad_speed_10 = 0.500000 pad_speed_11 = 0.500000 pad_speed_12 = 0.500000 pad_speed_13 = 0.500000 pad_speed_14 = 0.500000 pad_speed_15 = 0.500000 pad_speed_16 = 0.500000 pad_pan_1 = 0.500000 pad_pan_2 = 0.500000 pad_pan_3 = 0.500000 pad_pan_4 = 0.500000 pad_pan_5 = 0.500000 pad_pan_6 = 0.500000 pad_pan_7 = 0.500000 pad_pan_8 = 0.500000 pad_pan_9 = 0.500000 pad_pan_10 = 0.500000 pad_pan_11 = 0.500000 pad_pan_12 = 0.500000 pad_pan_13 = 0.500000 pad_pan_14 = 0.500000 pad_pan_15 = 0.500000 pad_pan_16 = 0.500000 pad_attack_1 = 0.000000 pad_attack_2 = 0.000000 pad_attack_3 = 0.000000 pad_attack_4 = 0.000000 pad_attack_5 = 0.000000 pad_attack_6 = 0.000000 pad_attack_7 = 0.000000 pad_attack_8 = 0.000000 pad_attack_9 = 0.000000 pad_attack_10 = 0.000000 pad_attack_11 = 0.000000 pad_attack_12 = 0.000000 pad_attack_13 = 0.000000 pad_attack_14 = 0.000000 pad_attack_15 = 0.000000 pad_attack_16 = 0.000000 pad_decay_1 = 0.500000 pad_decay_2 = 0.500000 pad_decay_3 = 0.500000 pad_decay_4 = 0.500000 pad_decay_5 = 0.500000 pad_decay_6 = 0.500000 pad_decay_7 = 0.500000 pad_decay_8 = 0.500000 pad_decay_9 = 0.500000 pad_decay_10 = 0.500000 pad_decay_11 = 0.500000 pad_decay_12 = 0.500000 pad_decay_13 = 0.500000 pad_decay_14 = 0.500000 pad_decay_15 = 0.500000 pad_decay_16 = 0.500000 pad_sustain_1 = 1.000000 pad_sustain_2 = 1.000000 pad_sustain_3 = 1.000000 pad_sustain_4 = 1.000000 pad_sustain_5 = 1.000000 pad_sustain_6 = 1.000000 pad_sustain_7 = 1.000000 pad_sustain_8 = 1.000000 pad_sustain_9 = 1.000000 pad_sustain_10 = 1.000000 pad_sustain_11 = 1.000000 pad_sustain_12 = 1.000000 pad_sustain_13 = 1.000000 pad_sustain_14 = 1.000000 pad_sustain_15 = 1.000000 pad_sustain_16 = 1.000000 pad_release_1 = 0.500000 pad_release_2 = 0.500000 pad_release_3 = 0.500000 pad_release_4 = 0.500000 pad_release_5 = 0.500000 pad_release_6 = 0.500000 pad_release_7 = 0.500000 pad_release_8 = 0.500000 pad_release_9 = 0.500000 pad_release_10 = 0.500000 pad_release_11 = 0.500000 pad_release_12 = 0.500000 pad_release_13 = 0.500000 pad_release_14 = 0.500000 pad_release_15 = 0.500000 pad_release_16 = 0.500000 JackEngine::XRun: client = Fabla was not finished, state = Running JackAudioDriver::ProcessGraphAsyncMaster: Process error Regards, Ralf

On Fri, 2013-07-19 at 22:33 +0100, Harry van Haaren wrote: Thank you, while you replied I rebuild ntk and then noticed it already was up to date :D. $ git log --pretty=format:"%h - %an, %ar : %s" 81f41f5 - Jonathan Moore Liles, 6 days ago : Fl_Choice: Respect specified boxtypes. Also get rid of old 'scheme' [snip] $ svn co http://svn.drobilla.net/lad/trunk/jalv jalv [snip] Checked out revision 5144. $ yaourt -S jalv-svn [snip] I get "error: target not found: lv2-ui-resize" for the AUR default pkgver=3882 and also if I edit it to 5144. I've got no time to continue now and to file an issue I need to sign up :(. I have to delay this, perhaps I can do it tomorrow or next week. I'm in passing now, sorry. Googling for lv2-ui-resize does show that the AUR package is missing, so I have to file an issue there too. Regards, Ralf

On Sat, Jul 20, 2013 at 8:54 AM, Ralf Mardorf <ralf.mardorf(a)alice-dsl.net>wrote;wrote: Updates and fixing will take place on the github page, I've pushed a commit and a note. Activity on the issue is emailed to me directly, so I'll be notified if anybody responds. I'm looking into what causes this issue, -Harry