9 May
2003
9 May
'03
8:14 p.m.
Hi,
I've run into problems with my audiophile 2496 where
the mpu401 hardware design doesn't support TX
interupts so when spinlocks occur it causes complete
system lockup. Power reset required.
My primary midi concern is i/o for mmc and mtc.
Questions
1. I've got a midiman usb 8x8, has anyone gotten this
to work with the firmware from the Linux Hotplug? I
think this work was done by Clemens Ladisch.
2. If I can get the 8x8 working, this would eliminate
the need for an audiocard that has midi i/o. Right?
3. Is anyone using active usb extension cables? We've
gotta run about 50 ft. Anyone see a problem with that?
Well, question 2 seems obvious but better to be safe.
ron
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
10 May
10 May
7:32 a.m.
R Parker wrote:
I've run into problems with my audiophile 2496
where
the mpu401 hardware design doesn't support TX
interupts so when spinlocks occur it causes complete
system lockup. Power reset required.
This bug has now been completely fixed. You can get the latest MPU-401
driver from the CVS, or I can send you the files.
1. I've got a midiman usb 8x8, has anyone gotten
this
to work with the firmware from the Linux Hotplug? I
think this work was done by Clemens Ladisch.
The GPL firmware on linux-hotplug.sourceforge.net was written by Lars
Dölle, and it supports 1x1 and 2x2 devices only. For the 8x8, you
currently need my package from
<http://www.informatik.uni-halle.de/~ladischc/midisport_linux_firmware.html>.
2. If I can get the 8x8 working, this would eliminate
the need for an audiocard that has midi i/o. Right?
Yes. (And nothing prevents you from using both.)
HTH
Clemens
2:41 p.m.
Hi Clemens,
Thanks much for the fixes and your reply. I'll 'cvs
update' alsa for the fixed ice1712. When I've got
time, I'll apply your patches and try the usb
midisport 8x8.
Do you see any advantage to using a pci card or usb;
is interupt overhead lower in one or the other, etc,
etc,?
My system is almost exclusively jack and its clients
so the kernel is patched for lowlatency, preemption
and capabilities.
ron
--- Clemens Ladisch <clemens(a)ladisch.de> wrote:
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
R Parker wrote:
<http://www.informatik.uni-halle.de/~ladischc/midisport_linux_firmware.html>.
I've run into problems with my audiophile
2496
where
the mpu401 hardware design doesn't support
TX
interupts so when spinlocks occur it causes
complete
system lockup. Power reset required.
This bug has now been completely fixed. You can get
the latest MPU-401
driver from the CVS, or I can send you the files.
1. I've got a midiman usb 8x8, has anyone
gotten
this
to work with the firmware from the Linux Hotplug?
I
think this work was done by Clemens Ladisch.
The GPL firmware on linux-hotplug.sourceforge.net
was written by Lars
D�lle, and it supports 1x1 and 2x2 devices only. For
the 8x8, you
currently need my package from
2. If I can get the 8x8 working, this would
eliminate
the need for an audiocard that has midi i/o.
Right?
Yes. (And nothing prevents you from using both.)
HTH
Clemens
20 May
20 May
5:14 a.m.
Hi Clemens,
I thought it'd be interesting for you to know that
Patrick Shirkey and I got the USB Midiman 8x8 setup
installed on my machine:
aconnect -i
client 0: 'System'
[type=kernel]
0 'Timer '
1 'Announce '
client 72: 'Rawmidi 1 - M Audio Audiophile 24/96
MPU-401' [type=kernel]
0 'M Audio Audiophile 24/96 MPU-401'
client 80: 'Rawmidi 2 - MidiSport 8x8' [type=kernel]
0 'MidiSport 8x8 Port 0'
1 'MidiSport 8x8 Port 1'
2 'MidiSport 8x8 Port 2'
3 'MidiSport 8x8 Port 3'
4 'MidiSport 8x8 Port 4'
5 'MidiSport 8x8 Port 5'
6 'MidiSport 8x8 Port 6'
7 'MidiSport 8x8 Port 7'
8 'MidiSport 8x8 Port 8'
aconnect -o
client 72: 'Rawmidi 1 - M Audio
Audiophile 24/96
MPU-401' [type=kernel]
0 'M Audio Audiophile 24/96 MPU-401'
client 80: 'Rawmidi 2 - MidiSport 8x8' [type=kernel]
0 'MidiSport 8x8 Port 0'
1 'MidiSport 8x8 Port 1'
2 'MidiSport 8x8 Port 2'
3 'MidiSport 8x8 Port 3'
4 'MidiSport 8x8 Port 4'
5 'MidiSport 8x8 Port 5'
6 'MidiSport 8x8 Port 6'
7 'MidiSport 8x8 Port 7'
8 'MidiSport 8x8 Port 8'
I haven't used the device yet but will within a day.
A potential stumbling block for this setup is the
kernel usb module choice of ohci for AMD vs uhci for
Intel. We thought it might be worth mentioning in the
README.
Something we've noticed is that aconnect is seeing
ports 0 -> 8. Of course that would appear to be nine
i/o ports. Is that correct?
Anyway, we wanted to thank you for the code.
ron
--- Clemens Ladisch <clemens(a)ladisch.de> wrote:
R Parker wrote:
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
Do you see any advantage to using a pci card or
usb;
is interupt overhead lower in one or the other,
etc,
etc,?
USB has a latency of 1ms due to the frame-based
communications, the
latency on the PCI bus is certainly lower.
HTH
Clemens
6:34 a.m.
On Tue, 20 May 2003 00:03:25 -0700 (PDT)
R Parker <rtp405(a)yahoo.com> wrote:
Hi Clemens,
I thought it'd be interesting for you to know that
Patrick Shirkey and I got the USB Midiman 8x8 setup
installed on my machine:
Does that mean we're going to see a quick-toot on Patrick's site soon? :-)
Erik
--
+-----------------------------------------------------------+
Erik de Castro Lopo nospam(a)mega-nerd.com (Yes it's valid)
+-----------------------------------------------------------+
Microsoft : Yesterday's software running on today's
hardware tomorrow.
12:07 p.m.
Erik de Castro Lopo wrote:
On Tue, 20 May 2003 00:03:25 -0700 (PDT)
R Parker <rtp405(a)yahoo.com> wrote:
Would you like to see one?
Would it be about installing usb midi devices or using them?
I can install but very rarely use midi.
Actually I have a small list of toots that other people may want to
contribute to.
seq24
Jamin
spiral loops (I'll finish this soon I think)
RG
--
Patrick Shirkey - Boost Hardware Ltd.
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================
Being on stage with the band in front of crowds shouting, "Get off! No!
We want normal music!", I think that was more like acting than anything
I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
Hi Clemens,
I thought it'd be interesting for you to know that
Patrick Shirkey and I got the USB Midiman 8x8 setup
installed on my machine:
Does that mean we're going to see a quick-toot on Patrick's site soon? :-)
6:30 p.m.
On Tue, 20 May 2003 22:42:59 +0900
Patrick Shirkey <pshirkey(a)boosthardware.com> wrote:
Would it be about installing usb midi devices or using
them?
Installing would be fine.
Erik
--
+-----------------------------------------------------------+
Erik de Castro Lopo nospam(a)mega-nerd.com (Yes it's valid)
+-----------------------------------------------------------+
"What is freedom of expression? Without the freedom to offend,
it ceases to exist." - Salman Rushdie
3:52 p.m.
R Parker wrote:
I thought it'd be interesting for you to know
that
Patrick Shirkey and I got the USB Midiman 8x8 setup
installed on my machine:
...
A potential stumbling block for this setup is the
kernel usb module choice of ohci for AMD vs uhci for
Intel. We thought it might be worth mentioning in the
README.
Yes, I'm going to write a troubleshooting guide where this (and
hotplug-related issues) will be discussed.
Regards
Clemens
10:13 p.m.
Clemens Ladisch wrote:
R Parker wrote:
Danke, Clemens. I look forward to it.
I have a hotplug problem where my MidiSport 2x2 is successfully
initialized "every other boot!" I see no change in
/etc/sysconfig/hwconf or /etc/modules.conf, but one time the device is
lit up and ready to go, and the next it's dark.
Disconnect/reconnect sees it detected and initialized immediately, so I
assume the problem with my RedHat 8.0 installation is either hotplug or
kudzu.
Frank
I thought it'd be interesting for you to know
that
Patrick Shirkey and I got the USB Midiman 8x8 setup
installed on my machine:
...
A potential stumbling block for this setup is the
kernel usb module choice of ohci for AMD vs uhci for
Intel. We thought it might be worth mentioning in the
README.
Yes, I'm going to write a troubleshooting guide where this (and
hotplug-related issues) will be discussed.
Regards
Clemens
30 May
30 May
2:25 p.m.
Hi,
I thought it'd worth following this up by letting
everyone know that the 8x8 is setup, working and being
used to route mmc and mtc messages.
Linux Environment
I'm running jack and ardour with an external digital
mixer. The mixer is sending mmc transport instructions
to ardour and ardour returns mtc which keeps the
transports synchronized. MMC bindings between the
mixer channel faders and ardour mixer strips is
working.
The next addition to my environment will probably be
MUSE because I believe it has some midi sync
capabilities. I hope to MUSE:MIDI-clock_out ->
external hardware sequencer/sampler. I probably won't
get around to this for a couple weeks.
Patrick, if you write a howto for installing the
hotplug and usb firmware perhaps we should include
information for configuring the setup that I've got.
I'd be happy to help at your request. I have a sense
that we could get Clemens to help explain my
configuration. :)
ron
--- R Parker <rtp405(a)yahoo.com> wrote:
Hi Clemens,
I thought it'd be interesting for you to know that
Patrick Shirkey and I got the USB Midiman 8x8 setup
installed on my machine:
__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com
aconnect -i
client 0: 'System'
[type=kernel]
0 'Timer '
1 'Announce '
client 72: 'Rawmidi 1 - M Audio Audiophile 24/96
MPU-401' [type=kernel]
0 'M Audio Audiophile 24/96 MPU-401'
client 80: 'Rawmidi 2 - MidiSport 8x8' [type=kernel]
0 'MidiSport 8x8 Port 0'
1 'MidiSport 8x8 Port 1'
2 'MidiSport 8x8 Port 2'
3 'MidiSport 8x8 Port 3'
4 'MidiSport 8x8 Port 4'
5 'MidiSport 8x8 Port 5'
6 'MidiSport 8x8 Port 6'
7 'MidiSport 8x8 Port 7'
8 'MidiSport 8x8 Port 8'
aconnect -o
client 72: 'Rawmidi 1 - M
Audio Audiophile 24/96
MPU-401' [type=kernel]
0 'M Audio Audiophile 24/96 MPU-401'
client 80: 'Rawmidi 2 - MidiSport 8x8' [type=kernel]
0 'MidiSport 8x8 Port 0'
1 'MidiSport 8x8 Port 1'
2 'MidiSport 8x8 Port 2'
3 'MidiSport 8x8 Port 3'
4 'MidiSport 8x8 Port 4'
5 'MidiSport 8x8 Port 5'
6 'MidiSport 8x8 Port 6'
7 'MidiSport 8x8 Port 7'
8 'MidiSport 8x8 Port 8'
I haven't used the device yet but will within a day.
A potential stumbling block for this setup is the
kernel usb module choice of ohci for AMD vs uhci for
Intel. We thought it might be worth mentioning in
the
README.
Something we've noticed is that aconnect is seeing
ports 0 -> 8. Of course that would appear to be nine
i/o ports. Is that correct?
Anyway, we wanted to thank you for the code.
ron
--- Clemens Ladisch <clemens(a)ladisch.de> wrote:
R Parker wrote:
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com Do you see any advantage to using a pci card or
usb;
is interupt overhead lower in one or the other,
etc,
etc,?
USB has a latency of 1ms due to the frame-based
communications, the
latency on the PCI bus is certainly lower.
HTH
Clemens
7881
days inactive
7902
days old
linux-audio-user@lists.linuxaudio.org
10 comments
5 participants
participants (5)
-
Clemens Ladisch -
Erik de Castro Lopo -
Frank Pirrone -
Patrick Shirkey -
R Parker