Hi list, hdsploader (via hotplug) on my box seems to load firmware at will. Sometimes it loads the Digiface firmware into my Multiface, sometimes it loads the correct one. I suppose I could simply delete the digiface firmware from the path, but what is it that makes it load the wrong one? correct one: kernel: [98033.160982] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff] kernel: [98033.161012] pci 0000:05:00.0: no hotplug settings from platform kernel: [98033.161264] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002) kernel: [98033.467674] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations kernel: [98033.474630] snd_hdsp 0000:05:00.0: firmware: agent loaded multiface_firmware_rev11.bin into memory wrong one: kernel: [98146.327251] Hammerfall-DSP: loading firmware kernel: [98149.392459] Hammerfall-DSP: finished firmware loading kernel: [98243.384790] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff] kernel: [98243.384824] pci 0000:05:00.0: no hotplug settings from platform kernel: [98243.385118] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002) kernel: [98243.689751] snd_hdsp 0000:05:00.0: firmware: agent loaded digiface_firmware_rev11.bin into memory Does someone else have the same issue? best, P