short answer is no. I can't find any information on the mic...but if it's dynamic it won't remotely work for pinking a room The goal is to determine what the speakers are outputting by recording with a 'flat' reference mic.... and then adjusting EQ to flatten the speakers. If the mic isn't flat then theres no point because you will over compensate in areas when the mic is colored... so... lets say there's a 2db bump in the speakers and mic at 3khz... you'll end up cutting 4db at 3khz to flatten when you referenced but you were only supposed to cut 2db... _________________________________________________________________ Help yourself to FREE treats served up daily at the Messenger Café. Stop by today. http://www.cafemessenger.com/info/info_sweetstuff2.html?ocid=TXT_TAGLM_OctW…