13 Jun
2015
13 Jun
'15
10:22 p.m.
Hi list,
I am wondering how I could make a VU meter automatically receive all
audio that is sent to specific jack output ports by various
applications, also from those that I will start later on a given day.
thank you for all ideas!
P
13 Jun
13 Jun
10:48 p.m.
On Sat, June 13, 2015 3:22 pm, Peter P. wrote:
I am wondering how I could make a VU meter
automatically receive all
audio that is sent to specific jack output ports by various
applications, also from those that I will start later on a given day.
Jack outputs can route to multiple places, so just route the outputs to
your sound card, or wherever you want the audio to go as primary, and also
connect those jack ports to meterbridge or a similar app:
http://plugin.org.uk/meterbridge/
--
Chris Caudle
10:52 p.m.
Chris, you're not wrong, of course, but he said "automatically".
Qjackctl's patchbay can be used to automatically redirect everything that goes
to an output, also to another one.
I use it to have everything that goes to out 1-2 (the main outputs),
to be sent also to out 7-8 (the headphone outputs) on my 1818VSL.
-- Emanuele Rusconi
11:24 p.m.
* Emanuele Rusconi <emarsk(a)gmail.com> [2015-06-13 16:52]:
Chris, you're not wrong, of course, but he said
"automatically".
Qjackctl's patchbay can be used to automatically redirect everything that goes
to an output, also to another one.
I use it to have everything that goes to out 1-2 (the main outputs),
to be sent also to out 7-8 (the headphone outputs) on my 1818VSL.
Thank you Emanuele,
I was afraid someone would say "qjackctl patchbay" ;)
I am still afraid of this thing after several years of jack useage.
Read this one too: http://www.rncbc.org/drupal/node/76
How did you create your patchbay configuration to connect all possible
jack applications that go to "out 1-2" also to "out 7-8"? Is there a
wildcard option for all possible sources?
Thank you!
best, P
11:41 p.m.
On 06/13/2015 10:24 PM, Peter P. wrote:
* Emanuele Rusconi <emarsk(a)gmail.com>
[2015-06-13 16:52]:
i'm sure Emanuele meant the "Forward" feature.
byee
--
rncbc aka. Rui Nuno Capela
Chris, you're not wrong, of course, but he
said "automatically".
Qjackctl's patchbay can be used to automatically redirect everything that goes
to an output, also to another one.
I use it to have everything that goes to out 1-2 (the main outputs),
to be sent also to out 7-8 (the headphone outputs) on my 1818VSL.
Thank you Emanuele,
I was afraid someone would say "qjackctl patchbay" ;)
I am still afraid of this thing after several years of jack useage.
Read this one too: http://www.rncbc.org/drupal/node/76
How did you create your patchbay configuration to connect all possible
jack applications that go to "out 1-2" also to "out 7-8"? Is there a
wildcard option for all possible sources?
14 Jun
14 Jun
12:11 a.m.
* Rui Nuno Capela <rncbc(a)rncbc.org> [2015-06-13 17:41]:
On 06/13/2015 10:24 PM, Peter P. wrote:
Thanks Rui, I found a greyed out dropdown that reads "Forward". Is there
any documentation on this?
Thanks again!
P
* Emanuele Rusconi <emarsk(a)gmail.com>
[2015-06-13 16:52]:
i'm sure Emanuele meant the "Forward" feature. Chris, you're not wrong, of course, but he
said "automatically".
Qjackctl's patchbay can be used to automatically redirect everything that goes
to an output, also to another one.
I use it to have everything that goes to out 1-2 (the main outputs),
to be sent also to out 7-8 (the headphone outputs) on my 1818VSL.
Thank you Emanuele,
I was afraid someone would say "qjackctl patchbay" ;)
I am still afraid of this thing after several years of jack useage.
Read this one too: http://www.rncbc.org/drupal/node/76
How did you create your patchbay configuration to connect all possible
jack applications that go to "out 1-2" also to "out 7-8"? Is there a
wildcard option for all possible sources?
12:48 a.m.
On 06/13/2015 11:11 PM, Peter P. wrote:
* Rui Nuno Capela <rncbc(a)rncbc.org> [2015-06-13
17:41]:
note that you can only set an output to "Forward" to another definet
output so called socket--remember that a socket is an ordered set of
ports (plugs) in qjackctl patchbay concept.
once set to forward you shall see a vertical directed line connecting
those output sockets.
cheers
--
rncbc aka. Rui Nuno Capela
On 06/13/2015 10:24 PM, Peter P. wrote:
Thanks Rui, I found a greyed out dropdown that reads "Forward". Is there
any documentation on this?
* Emanuele Rusconi <emarsk(a)gmail.com>
[2015-06-13 16:52]:
i'm sure Emanuele meant the "Forward" feature. Chris, you're not wrong, of course, but he
said "automatically".
Qjackctl's patchbay can be used to automatically redirect everything that goes
to an output, also to another one.
I use it to have everything that goes to out 1-2 (the main outputs),
to be sent also to out 7-8 (the headphone outputs) on my 1818VSL.
Thank you Emanuele,
I was afraid someone would say "qjackctl patchbay" ;)
I am still afraid of this thing after several years of jack useage.
Read this one too: http://www.rncbc.org/drupal/node/76
How did you create your patchbay configuration to connect all possible
jack applications that go to "out 1-2" also to "out 7-8"? Is there a
wildcard option for all possible sources?
12:54 a.m.
* Rui Nuno Capela <rncbc(a)rncbc.org> [2015-06-13 18:48]:
[...]
note that you can only set an output to "Forward" to another definet output
so called socket--remember that a socket is an ordered set of ports (plugs)
in qjackctl patchbay concept. I am confused, the only available output sockets that
I can add to the
left window of the patchbay are system capture ports.
Thanks Rui,
P
i'm sure Emanuele meant the "Forward"
feature.
Thanks Rui, I found a greyed out dropdown that reads "Forward". Is there
any documentation on this?
11:56 a.m.
On 06/13/2015 11:54 PM, Peter P. wrote:
* Rui Nuno Capela <rncbc(a)rncbc.org> [2015-06-13
18:48]:
[...]
note that you can only set an output to "Forward" to another definet output
so called socket--remember that a socket is an ordered set of ports (plugs)
in qjackctl patchbay concept. I am confused, the only available output sockets
that I can add to the
left window of the patchbay are system capture ports.
you can add output sockets by name or even regex, they don't need to be
currently active client/ports at any given time, just actual names need
to match when they are.
for instance, say that your system output ports resemble Emanuele's, you can
1. add one output_socket_1 for system playback ports out_1 and out_2;
2. add a second one output_socket_2 for same client name (system) ports
out_7 and out_8.
3. then edit output_socket_1 and set it forward to output_socket_2.
save and activate this patchbay profile.
from that moment after anything connectes to system:out_1,2 (main outs)
will automagically also connect to system:out_7,8 (headphones in
Emanuelle's example).
hth.
cheers
--
rncbc aka. Rui Nuno Capela
i'm sure Emanuele meant the "Forward"
feature.
Thanks Rui, I found a greyed out dropdown that reads "Forward". Is there
any documentation on this?
7:01 p.m.
* Rui Nuno Capela <rncbc(a)rncbc.org> [2015-06-14 05:56]:
On 06/13/2015 11:54 PM, Peter P. wrote:
Thanks Rui, I will use Kjetil's suggestion with jack_capture for now,
but your explanations of the patchbay come handy as well, they are much
appreciated!
P
* Rui Nuno Capela <rncbc(a)rncbc.org>
[2015-06-13 18:48]:
[...]
I am confused, the only available output sockets that
I can add to the
left window of the patchbay are system capture ports.
you can add output sockets by name or even regex, they don't need to be
currently active client/ports at any given time, just actual names need to
match when they are.
for instance, say that your system output ports resemble Emanuele's, you can
1. add one output_socket_1 for system playback ports out_1 and out_2;
2. add a second one output_socket_2 for same client name (system) ports
out_7 and out_8.
3. then edit output_socket_1 and set it forward to output_socket_2.
save and activate this patchbay profile.
from that moment after anything connectes to system:out_1,2 (main outs) will
automagically also connect to system:out_7,8 (headphones in Emanuelle's
example).
>i'm sure Emanuele meant the "Forward" feature.
Thanks Rui, I found a greyed out dropdown that reads "Forward". Is there
any documentation on this?
note that you can only set an output to "Forward" to another definet output
so called socket--remember that a socket is an ordered set of ports (plugs)
in qjackctl patchbay concept.
3261
days inactive
3262
days old
linux-audio-user@lists.linuxaudio.org
9 comments
4 participants
participants (4)
-
Chris Caudle -
Emanuele Rusconi -
Peter P. -
Rui Nuno Capela