20 Jan
2015
20 Jan
'15
10:56 p.m.
Hi
I wanna use non from kxstudio instead of my compiled version. How do I
completely remove everything installed by hand? Here's what I did and
the result:
atte@skagen:~/software/shared/non$ sudo ./waf uninstall
Waf: Entering directory `/mnt/data/atte/medium/software/non/build'
- remove /usr/local/share/icons/hicolor/128x128/apps/non-mixer.png
- remove /usr/local/share/pixmaps/non-mixer/icon-256x256.png
- remove /usr/local/share/doc/non-mixer/MANUAL.html
- remove /usr/local/share/pixmaps/non-mixer/panner-plane-502x502.png
- remove /usr/local/share/icons/hicolor/16x16/apps/non-mixer.png
- remove /usr/local/share/icons/hicolor/192x192/apps/non-mixer.png
- remove /usr/local/share/icons/hicolor/256x256/apps/non-mixer.png
- remove /usr/local/share/icons/hicolor/32x32/apps/non-mixer.png
- remove /usr/local/share/icons/hicolor/36x36/apps/non-mixer.png
- remove /usr/local/share/icons/hicolor/48x48/apps/non-mixer.png
- remove /usr/local/share/icons/hicolor/512x512/apps/non-mixer.png
- remove /usr/local/share/pixmaps/non-mixer/panner-plane-802x802.png
- remove /usr/local/share/doc/non-mixer/controls.png
- remove /usr/local/share/icons/hicolor/64x64/apps/non-mixer.png
- remove /usr/local/share/doc/non-mixer/group-dropdown.png
- remove /usr/local/share/pixmaps/non-mixer/panner-plane-92x92.png
- remove /usr/local/share/icons/hicolor/72x72/apps/non-mixer.png
- remove /usr/local/share/doc/non-mixer/icon.png
- remove /usr/local/share/pixmaps/non-mixer/panner-sphere-502x502.png
- remove /usr/local/share/icons/hicolor/96x96/apps/non-mixer.png
- remove /usr/local/share/doc/non-mixer/mixer-strips.png
- remove /usr/local/share/doc/non-mixer/modules.png
- remove /usr/local/share/doc/non-mixer/new-project.png
- remove
/usr/local/share/doc/non-mixer/non-mixer-and-non-daw-in-patchage.png
- remove /usr/local/share/pixmaps/non-mixer/panner-sphere-802x802.png
- remove /usr/local/share/doc/non-mixer/non-mixer-complex.png
- remove /usr/local/share/pixmaps/non-mixer/panner-sphere-92x92.png
- remove /usr/local/share/doc/non-mixer/single-strip.png
- remove /usr/local/share/doc/non-mixer/spatialization-console.png
- remove /usr/local/share/doc/non-mixer/spatialization-in-mpe.png
- remove /usr/local/share/doc/non-mixer/spatialization-on-strip.png
- remove /usr/local/share/doc/non-mixer/spatializer-module.png
Waf: Leaving directory `/mnt/data/atte/medium/software/non/build'
Build failed
Traceback (most recent call last):
File
"/mnt/data/atte/medium/software/non/.waf-1.8.0-f4f5e7c10cf1681215dc56fc3b992944/waflib/Task.py",
line 103, in process
ret=self.run()
File
"/mnt/data/atte/medium/software/non/.waf-1.8.0-f4f5e7c10cf1681215dc56fc3b992944/waflib/Build.py",
line 456, in run
return self.generator.exec_task()
File
"/mnt/data/atte/medium/software/non/.waf-1.8.0-f4f5e7c10cf1681215dc56fc3b992944/waflib/Build.py",
line 481, in exec_symlink_as
self.generator.bld.do_link(src,destfile,tsk=self)
TypeError: do_link() got an unexpected keyword argument 'tsk'
Any help appreciated!
--
Atte
http://atte.dk http://a773.dk
20 Jan
20 Jan
11:17 p.m.
Atte, Jan 20 2015:
Hi
I wanna use non from kxstudio instead of my compiled version. How do I
completely remove everything installed by hand? Here's what I did and
the result:
...
"/mnt/data/atte/medium/software/non/.waf-1.8.0-f4f5e7c10cf1681215dc56fc3b992944/waflib/Build.py",
line 481, in exec_symlink_as
self.generator.bld.do_link(src,destfile,tsk=self)
TypeError: do_link() got an unexpected keyword argument 'tsk'
Any help appreciated!
In case you won't find better advise.
1) check if your python version is best suited to your version of non. Possibly too old?
Or if your non version is old, too new? If python seems outdated, try to update.
Otherwise:
2) edit
/mnt/data/atte/medium/software/non/.waf-1.8.0-f4f5e7c10cf1681215dc56fc3b992944/waflib/Build.py
and remove ,tsk=self or just =self. Experiment as needed. If that doesn't work or only
increases the errors:
3) go into /usr/local/lib and type:
ls | grep -i -e "non" | less
If the result is ONLY non related, try:
for FILE in `find ./ -iname *non*`; do rm $FILE; done
This ONLY works, if the names have no spaces, which is unlikely.
Repeat the above in /usr/local/bin, remove any other programs, that you can directly
connect with non, which don't contain the actual word "non".
But hopefully someone here has specific experience with non and can point out better
solutions.
Good luck!
Ta-ta
----
Ffanci
* Internet: https://freeshell.de/~silvain
Twitter: http://twitter.com/ffanci_silvain
21 Jan
21 Jan
9:17 a.m.
On 01/20/2015 11:17 PM, F. Silvain wrote:
> Any help appreciated!
2) edit
/mnt/data/atte/medium/software/non/.waf-1.8.0-f4f5e7c10cf1681215dc56fc3b992944/waflib/Build.py
and remove ,tsk=self or just =self. Experiment as needed.
removed ",tsk=self" and now waf uninstalled without errors.
Thanks alot. Actually I should have thought of that myself, it's just
python.
--
Atte
http://atte.dk http://a773.dk
5:48 p.m.
New subject: Stow! (was Re: need help uninstalling non installed from source)
Quoting Atte <atte(a)youmail.dk>dk>:
I wanna use non from kxstudio instead of my compiled
version. How do I
completely remove everything installed by hand? Here's what I did and
the result:
atte@skagen:~/software/shared/non$ sudo ./waf uninstall
Waf: Entering directory `/mnt/data/atte/medium/software/non/build'
- remove /usr/local/share/icons/hicolor/128x128/apps/non-mixer.png
- remove /usr/local/share/pixmaps/non-mixer/icon-256x256.png
I always compile everything with --prefix=/opt/programname-version
(e.g. /opt/jack-0.124.1) and then use stow (ftp://ftp.gnu.org/gnu/stow
, I use v1.3.3) to populate /usr/local with symlinks.
The command for that would be 'stow -d /opt/ -t /usr/local jack-0.124.1'
To uninstall just run stow again with the -D flag added and 'rm -rf
/opt/jack-0.124.1'
This way it's also easy to install and test a shiny new version of a
program while still keeping the old and trusted version in case the
new one is crap.
Just skip the rm-part.
- Peder
22 Jan
22 Jan
6:13 a.m.
New subject: Stow! (was Re: need help uninstalling non installed from source)
On Wed, Jan 21, 2015 at 05:48:54PM +0100, Peder Hedlund wrote:
Quoting Atte <atte(a)youmail.dk>dk>:
I'll just add that the Gobo Linux distribution is built on a
technique similar to stow, using symlinks that allow
multiple versions to be installed, and keeping all files
for each applications separate.
The package manager and administration utilities for Gobo
are written in shell, which makes for interesting reading.
--
Joel Roth
I wanna use non from kxstudio instead of my
compiled version. How do I
completely remove everything installed by hand? Here's what I did and
the result:
atte@skagen:~/software/shared/non$ sudo ./waf uninstall
Waf: Entering directory `/mnt/data/atte/medium/software/non/build'
- remove /usr/local/share/icons/hicolor/128x128/apps/non-mixer.png
- remove /usr/local/share/pixmaps/non-mixer/icon-256x256.png
I always compile everything with --prefix=/opt/programname-version (e.g.
/opt/jack-0.124.1) and then use stow (ftp://ftp.gnu.org/gnu/stow , I use
v1.3.3) to populate /usr/local with symlinks.
The command for that would be 'stow -d /opt/ -t /usr/local jack-0.124.1'
To uninstall just run stow again with the -D flag added and 'rm -rf
/opt/jack-0.124.1'
This way it's also easy to install and test a shiny new version of a program
while still keeping the old and trusted version in case the new one is crap.
Just skip the rm-part. 
23 Jan
23 Jan
4:48 a.m.
New subject: Stow! (was Re: need help uninstalling non installed from source)
On Wed, Jan 21, 2015 at 07:13:15PM -1000, Joel Roth wrote:
On Wed, Jan 21, 2015 at 05:48:54PM +0100, Peder
Hedlund wrote:
For the past few years I've used nix for handling things that Debian just can't
seem to keep up with.
Nix is pretty cool, it's uses immutability, like Git or CouchBase or Clojure. Beats
doing a ton of source builds in /usr/local or /opt.
-ken
Quoting Atte <atte(a)youmail.dk>dk>:
I'll just add that the Gobo Linux distribution is built on a
technique similar to stow, using symlinks that allow
multiple versions to be installed, and keeping all files
for each applications separate.
The package manager and administration utilities for Gobo
are written in shell, which makes for interesting reading.
I wanna use non from kxstudio instead of my
compiled version. How do I
completely remove everything installed by hand? Here's what I did and
the result:
atte@skagen:~/software/shared/non$ sudo ./waf uninstall
Waf: Entering directory `/mnt/data/atte/medium/software/non/build'
- remove /usr/local/share/icons/hicolor/128x128/apps/non-mixer.png
- remove /usr/local/share/pixmaps/non-mixer/icon-256x256.png
I always compile everything with --prefix=/opt/programname-version (e.g.
/opt/jack-0.124.1) and then use stow (ftp://ftp.gnu.org/gnu/stow , I use
v1.3.3) to populate /usr/local with symlinks.
The command for that would be 'stow -d /opt/ -t /usr/local jack-0.124.1'
To uninstall just run stow again with the -D flag added and 'rm -rf
/opt/jack-0.124.1'
This way it's also easy to install and test a shiny new version of a program
while still keeping the old and trusted version in case the new one is crap.
Just skip the rm-part.
7:31 a.m.
New subject: Stow! (was Re: need help uninstalling non installed from source)
On Thu, Jan 22, 2015 at 07:48:32PM -0800, Ken Restivo wrote:
On Wed, Jan 21, 2015 at 07:13:15PM -1000, Joel Roth
wrote:
I looked into Nix before. Based on a functional language.
Some of the same researchers have another project, Mancoosi,
aiming to provide per-application rollback ability to
users.[1]
Ubuntu now has Snappy, an alternative package with similarities to Gobo
Linux and stow.[2]
They say it's for the cloud, but I wonder if it won't
supplant apt-get entirely for Ubuntu in future. The effort
involved in Debian packaging is huge, IMO, compared to some
other simpler systems.
1. http://www.dicosmo.org/space/PlaquetteMancoosi-rotated.pdf
2. https://developer.ubuntu.com/en/snappy/
Joel
On Wed, Jan 21, 2015 at 05:48:54PM +0100, Peder
Hedlund wrote:
For the past few years I've used nix for handling things that Debian just can't
seem to keep up with.
Nix is pretty cool, it's uses immutability, like Git or CouchBase or Clojure. Beats
doing a ton of source builds in /usr/local or /opt. Quoting Atte <atte(a)youmail.dk>dk>:
I'll just add that the Gobo Linux distribution is built on a
technique similar to stow, using symlinks that allow
multiple versions to be installed, and keeping all files
for each applications separate.
The package manager and administration utilities for Gobo
are written in shell, which makes for interesting reading.
I wanna use non from kxstudio instead of my
compiled version. How do I
completely remove everything installed by hand? Here's what I did and
the result:
atte@skagen:~/software/shared/non$ sudo ./waf uninstall
Waf: Entering directory `/mnt/data/atte/medium/software/non/build'
- remove /usr/local/share/icons/hicolor/128x128/apps/non-mixer.png
- remove /usr/local/share/pixmaps/non-mixer/icon-256x256.png
I always compile everything with --prefix=/opt/programname-version (e.g.
/opt/jack-0.124.1) and then use stow (ftp://ftp.gnu.org/gnu/stow , I use
v1.3.3) to populate /usr/local with symlinks.
The command for that would be 'stow -d /opt/ -t /usr/local jack-0.124.1'
To uninstall just run stow again with the -D flag added and 'rm -rf
/opt/jack-0.124.1'
This way it's also easy to install and test a shiny new version of a program
while still keeping the old and trusted version in case the new one is crap.
Just skip the rm-part. -ken
--
Joel Roth
3390
days inactive
3393
days old
linux-audio-user@lists.linuxaudio.org
6 comments
5 participants
participants (5)
-
Atte -
F. Silvain -
Joel Roth -
Ken Restivo -
Peder Hedlund