29 Dec
2010
29 Dec
'10
7:58 p.m.
OK many thanks to Dave and Rui! :) - missing Jack dev files was the problem
it seems that after my upgrade the dev files were not installed
so I installed them and was able to compile qtractor with vst - I tested
it with discoDSP/highlife sampler and it works
one problem though...I am not able to use LV2 plugs
how do I set the 'configure' to include the services listed below?
Version: 0.4.7
Build: Dec 28 2010 11:57:17
MPEG-1 Audio Layer 3 (libmad) file support disabled.
Pitch-shifting support (librubberband) disabled.
OSC service support (liblo) disabled.
DSSI Plug-in support disabled.
LV2 Plug-in support disabled.
JACK Session support disabled.
29 Dec
29 Dec
8:24 p.m.
Kim Cascone wrote:
OK many thanks to Dave and Rui! :) - missing Jack dev
files was the
problem
it seems that after my upgrade the dev files were not installed
so I installed them and was able to compile qtractor with vst - I
tested it with discoDSP/highlife sampler and it works
one problem though...I am not able to use LV2 plugs
how do I set the 'configure' to include the services listed below?
Version: 0.4.7
Build: Dec 28 2010 11:57:17
MPEG-1 Audio Layer 3 (libmad) file support disabled.
Pitch-shifting support (librubberband) disabled.
OSC service support (liblo) disabled.
DSSI Plug-in support disabled.
LV2 Plug-in support disabled.
JACK Session support disabled.
Hi Kim,
At first look I'd say you're missing the dev packages for those
features. So you'll need libmad-dev, liblo-dev, and so forth. You
shouldn't have to do anything else if things are in their expected
locations, the LV2 support is enabled by default in the configure
script. The script will throw the errors you've received if it doesn't
find the dev packages.
You may need to compile JACK yourself for session support, but someone
else will have to verify that. I'm still on Jack1 on my machines.
HTH,
dp
8:38 p.m.
On 12/29/2010 11:24 AM, Dave Phillips wrote:
Kim Cascone wrote:
ok -- I guess
much of my dev files didn't get re-installed on my upgrade
for some reason
will check it out and try again
OK many thanks to Dave and Rui! :) - missing Jack
dev files was the
problem
it seems that after my upgrade the dev files were not installed
so I installed them and was able to compile qtractor with vst - I
tested it with discoDSP/highlife sampler and it works
one problem though...I am not able to use LV2 plugs
how do I set the 'configure' to include the services listed below?
Version: 0.4.7
Build: Dec 28 2010 11:57:17
MPEG-1 Audio Layer 3 (libmad) file support disabled.
Pitch-shifting support (librubberband) disabled.
OSC service support (liblo) disabled.
DSSI Plug-in support disabled.
LV2 Plug-in support disabled.
JACK Session support disabled.
Hi Kim,
At first look I'd say you're missing the dev packages for those
features. So you'll need libmad-dev, liblo-dev, and so forth. You shouldn't have to do anything else if things
are in their expected
locations, the LV2 support is enabled by default in the configure script.
The script will throw the errors you've received
if it doesn't find
the dev packages.
I didn't see anything in the './configure' stage but
I was basically
only looking for vst success then -- will try again and see what's going on
You may need to compile JACK yourself for session support, but someone
else will have to verify that. I'm still on Jack1 on my machines.
it's
using Jack
I'm still on jackdmp version 1.9.6
because upgrading to 2 would wipe out all my apps - so says Synaptic
thanks again!!
KIM
HTH,
dp
8:37 p.m.
On 29.12.2010 19:58, Kim Cascone wrote:
OK many thanks to Dave and Rui! :) - missing Jack dev
files was the
problem
it seems that after my upgrade the dev files were not installed
so I installed them and was able to compile qtractor with vst - I
tested it with discoDSP/highlife sampler and it works
one problem though...I am not able to use LV2 plugs
how do I set the 'configure' to include the services listed below?
Version: 0.4.7
Build: Dec 28 2010 11:57:17
hallo kim,
i suppose for this you will need to have installed:
MPEG-1
Audio Layer 3 (libmad) file support disabled.
libmad and libmad-dev
Pitch-shifting
support (librubberband) disabled.
librubberband and librubberband-dev
OSC service
support (liblo) disabled.
liblo and liblo-dev
DSSI
Plug-in support disabled.
for this dssi-dev
LV2 Plug-in
support disabled.
for this libslv2 and the libslv2-dev libraries
(this is all, how it is called in debian sid. other distributions might
call it different, but not that much different...)
JACK
Session support disabled.
for this you will need a jackd from svn, since jack-session-support is
still not released.
just browse synaptic, or what ever tool you use for installing packages
and find the libraries and the appropriate dev's (developing libraries).
hope this will help you for moving forward?!
cheers,
doc
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
8:39 p.m.
On 12/29/2010 06:58 PM, Kim Cascone wrote:
OK many thanks to Dave and Rui! :) - missing Jack dev
files was the problem
it seems that after my upgrade the dev files were not installed
so I installed them and was able to compile qtractor with vst - I tested
it with discoDSP/highlife sampler and it works
one problem though...I am not able to use LV2 plugs
how do I set the 'configure' to include the services listed below?
Version: 0.4.7
Build: Dec 28 2010 11:57:17
shameless plug: you could grab the latest svn snapshot instead, from here:
http://www.rncbc.org/snapshots#qtractor
it should read version 0.4.7.49 attotw, which will make your life easier
wrt. lv2 support for instance, perhaps... besides, it has a plethora of
fixes included too ;)
anyway, you must install the following ones and for some, the hell of
their dependents:
MPEG-1 Audio Layer 3 (libmad) file support disabled.
libmad0-dev
Pitch-shifting support (librubberband) disabled.
librubberband-dev
OSC service support (liblo) disabled.
DSSI Plug-in support disabled.
dssi-dev
liblo-dev
LV2 Plug-in support disabled.
libslv2-dev
lv2core
JACK Session support disabled.
wait, for this you will need to build either jack1 or 2 (or even
tschack) from its own svn trunk (tschack might be from git repo. ask
torbenh)
then proceed to ./configure and watch for its summary report. when happy
go make :)
cheers
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
9:23 p.m.
Kim!
I have this build script for Arch, probably Ubuntu is quite similar:
http://aur.archlinux.org/packages/qtractor-vst-svn/qtractor-vst-svn/PKGBUILD
On Arch the dev/devel packages are packaged with the "normal" ones, so
you just need to repeat each one with "-dev" added.
5131
days inactive
5131
days old
linux-audio-user@lists.linuxaudio.org
5 comments
5 participants
participants (5)
-
Bernardo Barros -
Dave Phillips -
Dragan Noveski -
Kim Cascone -
Rui Nuno Capela