no need to reply i found the module name 'firmware' at <http://sourceforge.net/cvs/?group_id=17679 > and installed it. it works great ;) thanks guys, especially the ezusb ppl for making it so easy.. replying to my own emails, what a dork ;) julian oliver On Mon, 31 Mar 2003 04:53:25 +1000 delire &lt;delire(a)selectparks.net&gt; wrote: //hi, // //i'm trying to get my midisport1x1 running. i have had the 2x2 running fine [a friends]. the odd thing is the light comes on the 1x1 device, yet i don't get any midi input reaching my software. // //also /var/log/syslog says the following: // ////--> // //Mar 31 04:16:39 dropWorld kernel: hub.c: new USB device 00:1f.2-1, assigned address 10 // //Mar 31 04:16:39 dropWorld kernel: usb.c: USB device 10 (vend/prod 0x763/0x1011) is not claimed by any active driver. // //Mar 31 04:16:42 dropWorld usb.agent: ... no modules for USB product 763/1011/121 // ////<-- // //to install it i used the extracted windows driver on the install cd that came with the product using the method shown on this page: // //http://www.informatik.uni-halle.de/~ladischc/midisport-firmware/ // //i have looked at the ezusbmidi project, but i can't find any debian packages for the ezusb system, or even tarballs. should i try this cvs? // //http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/linux-hotplug/firmware/ezusb/midi/original/ // //if so how do i point cvs to this.. what's the module name? // //cheers, // //julian oliver // ////--> // //nick -> delire //home -> http://selectparks.net //key -> http://selectparks.net/jkey.txt // // // //--> nick -> delire home -> http://selectparks.net key -> http://selectparks.net/jkey.txt